| <?xml version="1.0" encoding="UTF-8"?> | |
| <!-- | |
| *** GENERATED FROM project.xml - DO NOT EDIT *** | |
| *** EDIT ../build.xml INSTEAD *** | |
| For the purpose of easier reading the script | |
| is divided into following sections: | |
| - initialization | |
| - compilation | |
| - jar | |
| - execution | |
| - debugging | |
| - javadoc | |
| - junit compilation | |
| - junit execution | |
| - junit debugging | |
| - applet | |
| - cleanup | |
| --> | |
| <project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="Prettify-impl"> | |
| <fail message="Please build using Ant 1.8.0 or higher."> | |
| <condition> | |
| <not> | |
| <antversion atleast="1.8.0"/> | |
| </not> | |
| </condition> | |
| </fail> | |
| <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/> | |
| <!-- | |
| ====================== | |
| INITIALIZATION SECTION | |
| ====================== | |
| --> | |
| <target name="-pre-init"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="-pre-init" name="-init-private"> | |
| <property file="nbproject/private/config.properties"/> | |
| <property file="nbproject/private/configs/${config}.properties"/> | |
| <property file="nbproject/private/private.properties"/> | |
| </target> | |
| <target depends="-pre-init,-init-private" name="-init-user"> | |
| <property file="${user.properties.file}"/> | |
| <!-- The two properties below are usually overridden --> | |
| <!-- by the active platform. Just a fallback. --> | |
| <property name="default.javac.source" value="1.4"/> | |
| <property name="default.javac.target" value="1.4"/> | |
| </target> | |
| <target depends="-pre-init,-init-private,-init-user" name="-init-project"> | |
| <property file="nbproject/configs/${config}.properties"/> | |
| <property file="nbproject/project.properties"/> | |
| </target> | |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init"> | |
| <available file="${manifest.file}" property="manifest.available"/> | |
| <condition property="splashscreen.available"> | |
| <and> | |
| <not> | |
| <equals arg1="${application.splash}" arg2="" trim="true"/> | |
| </not> | |
| <available file="${application.splash}"/> | |
| </and> | |
| </condition> | |
| <condition property="main.class.available"> | |
| <and> | |
| <isset property="main.class"/> | |
| <not> | |
| <equals arg1="${main.class}" arg2="" trim="true"/> | |
| </not> | |
| </and> | |
| </condition> | |
| <condition property="manifest.available+main.class"> | |
| <and> | |
| <isset property="manifest.available"/> | |
| <isset property="main.class.available"/> | |
| </and> | |
| </condition> | |
| <condition property="do.archive"> | |
| <not> | |
| <istrue value="${jar.archive.disabled}"/> | |
| </not> | |
| </condition> | |
| <condition property="do.mkdist"> | |
| <and> | |
| <isset property="do.archive"/> | |
| <isset property="libs.CopyLibs.classpath"/> | |
| <not> | |
| <istrue value="${mkdist.disabled}"/> | |
| </not> | |
| </and> | |
| </condition> | |
| <condition property="manifest.available+main.class+mkdist.available"> | |
| <and> | |
| <istrue value="${manifest.available+main.class}"/> | |
| <isset property="do.mkdist"/> | |
| </and> | |
| </condition> | |
| <condition property="do.archive+manifest.available"> | |
| <and> | |
| <isset property="manifest.available"/> | |
| <istrue value="${do.archive}"/> | |
| </and> | |
| </condition> | |
| <condition property="do.archive+main.class.available"> | |
| <and> | |
| <isset property="main.class.available"/> | |
| <istrue value="${do.archive}"/> | |
| </and> | |
| </condition> | |
| <condition property="do.archive+splashscreen.available"> | |
| <and> | |
| <isset property="splashscreen.available"/> | |
| <istrue value="${do.archive}"/> | |
| </and> | |
| </condition> | |
| <condition property="do.archive+manifest.available+main.class"> | |
| <and> | |
| <istrue value="${manifest.available+main.class}"/> | |
| <istrue value="${do.archive}"/> | |
| </and> | |
| </condition> | |
| <condition property="manifest.available-mkdist.available"> | |
| <or> | |
| <istrue value="${manifest.available}"/> | |
| <isset property="do.mkdist"/> | |
| </or> | |
| </condition> | |
| <condition property="manifest.available+main.class-mkdist.available"> | |
| <or> | |
| <istrue value="${manifest.available+main.class}"/> | |
| <isset property="do.mkdist"/> | |
| </or> | |
| </condition> | |
| <condition property="have.tests"> | |
| <or> | |
| <available file="${test.src.dir}"/> | |
| </or> | |
| </condition> | |
| <condition property="have.sources"> | |
| <or> | |
| <available file="${src.dir}"/> | |
| </or> | |
| </condition> | |
| <condition property="netbeans.home+have.tests"> | |
| <and> | |
| <isset property="netbeans.home"/> | |
| <isset property="have.tests"/> | |
| </and> | |
| </condition> | |
| <condition property="no.javadoc.preview"> | |
| <and> | |
| <isset property="javadoc.preview"/> | |
| <isfalse value="${javadoc.preview}"/> | |
| </and> | |
| </condition> | |
| <property name="run.jvmargs" value=""/> | |
| <property name="javac.compilerargs" value=""/> | |
| <property name="work.dir" value="${basedir}"/> | |
| <condition property="no.deps"> | |
| <and> | |
| <istrue value="${no.dependencies}"/> | |
| </and> | |
| </condition> | |
| <property name="javac.debug" value="true"/> | |
| <property name="javadoc.preview" value="true"/> | |
| <property name="application.args" value=""/> | |
| <property name="source.encoding" value="${file.encoding}"/> | |
| <property name="runtime.encoding" value="${source.encoding}"/> | |
| <condition property="javadoc.encoding.used" value="${javadoc.encoding}"> | |
| <and> | |
| <isset property="javadoc.encoding"/> | |
| <not> | |
| <equals arg1="${javadoc.encoding}" arg2=""/> | |
| </not> | |
| </and> | |
| </condition> | |
| <property name="javadoc.encoding.used" value="${source.encoding}"/> | |
| <property name="includes" value="**"/> | |
| <property name="excludes" value=""/> | |
| <property name="do.depend" value="false"/> | |
| <condition property="do.depend.true"> | |
| <istrue value="${do.depend}"/> | |
| </condition> | |
| <path id="endorsed.classpath.path" path="${endorsed.classpath}"/> | |
| <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'"> | |
| <length length="0" string="${endorsed.classpath}" when="greater"/> | |
| </condition> | |
| <condition else="false" property="jdkBug6558476"> | |
| <and> | |
| <matches pattern="1\.[56]" string="${java.specification.version}"/> | |
| <not> | |
| <os family="unix"/> | |
| </not> | |
| </and> | |
| </condition> | |
| <property name="javac.fork" value="${jdkBug6558476}"/> | |
| <property name="jar.index" value="false"/> | |
| <property name="jar.index.metainf" value="${jar.index}"/> | |
| <property name="copylibs.rebase" value="true"/> | |
| <available file="${meta.inf.dir}/persistence.xml" property="has.persistence.xml"/> | |
| </target> | |
| <target name="-post-init"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check"> | |
| <fail unless="src.dir">Must set src.dir</fail> | |
| <fail unless="test.src.dir">Must set test.src.dir</fail> | |
| <fail unless="build.dir">Must set build.dir</fail> | |
| <fail unless="dist.dir">Must set dist.dir</fail> | |
| <fail unless="build.classes.dir">Must set build.classes.dir</fail> | |
| <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail> | |
| <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail> | |
| <fail unless="build.test.results.dir">Must set build.test.results.dir</fail> | |
| <fail unless="build.classes.excludes">Must set build.classes.excludes</fail> | |
| <fail unless="dist.jar">Must set dist.jar</fail> | |
| </target> | |
| <target name="-init-macrodef-property"> | |
| <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1"> | |
| <attribute name="name"/> | |
| <attribute name="value"/> | |
| <sequential> | |
| <property name="@{name}" value="${@{value}}"/> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors"> | |
| <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${src.dir}" name="srcdir"/> | |
| <attribute default="${build.classes.dir}" name="destdir"/> | |
| <attribute default="${javac.classpath}" name="classpath"/> | |
| <attribute default="${javac.processorpath}" name="processorpath"/> | |
| <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/> | |
| <attribute default="${includes}" name="includes"/> | |
| <attribute default="${excludes}" name="excludes"/> | |
| <attribute default="${javac.debug}" name="debug"/> | |
| <attribute default="${empty.dir}" name="sourcepath"/> | |
| <attribute default="${empty.dir}" name="gensrcdir"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <property location="${build.dir}/empty" name="empty.dir"/> | |
| <mkdir dir="${empty.dir}"/> | |
| <mkdir dir="@{apgeneratedsrcdir}"/> | |
| <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> | |
| <src> | |
| <dirset dir="@{gensrcdir}" erroronmissingdir="false"> | |
| <include name="*"/> | |
| </dirset> | |
| </src> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <compilerarg line="${javac.compilerargs}"/> | |
| <compilerarg value="-processorpath"/> | |
| <compilerarg path="@{processorpath}:${empty.dir}"/> | |
| <compilerarg line="${ap.processors.internal}"/> | |
| <compilerarg line="${annotation.processing.processor.options}"/> | |
| <compilerarg value="-s"/> | |
| <compilerarg path="@{apgeneratedsrcdir}"/> | |
| <compilerarg line="${ap.proc.none.internal}"/> | |
| <customize/> | |
| </javac> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal"> | |
| <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${src.dir}" name="srcdir"/> | |
| <attribute default="${build.classes.dir}" name="destdir"/> | |
| <attribute default="${javac.classpath}" name="classpath"/> | |
| <attribute default="${javac.processorpath}" name="processorpath"/> | |
| <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/> | |
| <attribute default="${includes}" name="includes"/> | |
| <attribute default="${excludes}" name="excludes"/> | |
| <attribute default="${javac.debug}" name="debug"/> | |
| <attribute default="${empty.dir}" name="sourcepath"/> | |
| <attribute default="${empty.dir}" name="gensrcdir"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <property location="${build.dir}/empty" name="empty.dir"/> | |
| <mkdir dir="${empty.dir}"/> | |
| <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> | |
| <src> | |
| <dirset dir="@{gensrcdir}" erroronmissingdir="false"> | |
| <include name="*"/> | |
| </dirset> | |
| </src> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <compilerarg line="${javac.compilerargs}"/> | |
| <customize/> | |
| </javac> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac"> | |
| <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${src.dir}" name="srcdir"/> | |
| <attribute default="${build.classes.dir}" name="destdir"/> | |
| <attribute default="${javac.classpath}" name="classpath"/> | |
| <sequential> | |
| <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}"> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| </depend> | |
| </sequential> | |
| </macrodef> | |
| <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${build.classes.dir}" name="destdir"/> | |
| <sequential> | |
| <fail unless="javac.includes">Must set javac.includes</fail> | |
| <pathconvert pathsep="${line.separator}" property="javac.includes.binary"> | |
| <path> | |
| <filelist dir="@{destdir}" files="${javac.includes}"/> | |
| </path> | |
| <globmapper from="*.java" to="*.class"/> | |
| </pathconvert> | |
| <tempfile deleteonexit="true" property="javac.includesfile.binary"/> | |
| <echo file="${javac.includesfile.binary}" message="${javac.includes.binary}"/> | |
| <delete> | |
| <files includesfile="${javac.includesfile.binary}"/> | |
| </delete> | |
| <delete> | |
| <fileset file="${javac.includesfile.binary}"/> | |
| </delete> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target name="-init-macrodef-junit"> | |
| <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${includes}" name="includes"/> | |
| <attribute default="${excludes}" name="excludes"/> | |
| <attribute default="**" name="testincludes"/> | |
| <sequential> | |
| <property name="junit.forkmode" value="perTest"/> | |
| <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" forkmode="${junit.forkmode}" showoutput="true" tempdir="${build.dir}"> | |
| <batchtest todir="${build.test.results.dir}"> | |
| <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}"> | |
| <filename name="@{testincludes}"/> | |
| </fileset> | |
| </batchtest> | |
| <classpath> | |
| <path path="${run.test.classpath}"/> | |
| </classpath> | |
| <syspropertyset> | |
| <propertyref prefix="test-sys-prop."/> | |
| <mapper from="test-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <formatter type="brief" usefile="false"/> | |
| <formatter type="xml"/> | |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <jvmarg value="-ea"/> | |
| <jvmarg line="${run.jvmargs}"/> | |
| </junit> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile, -profile-init-check" name="profile-init"/> | |
| <target name="-profile-pre-init"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target name="-profile-post-init"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target name="-profile-init-macrodef-profile"> | |
| <macrodef name="resolve"> | |
| <attribute name="name"/> | |
| <attribute name="value"/> | |
| <sequential> | |
| <property name="@{name}" value="${env.@{value}}"/> | |
| </sequential> | |
| </macrodef> | |
| <macrodef name="profile"> | |
| <attribute default="${main.class}" name="classname"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <property environment="env"/> | |
| <resolve name="profiler.current.path" value="${profiler.info.pathvar}"/> | |
| <java classname="@{classname}" dir="${profiler.info.dir}" fork="true" jvm="${profiler.info.jvm}"> | |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <jvmarg value="${profiler.info.jvmargs.agent}"/> | |
| <jvmarg line="${profiler.info.jvmargs}"/> | |
| <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/> | |
| <arg line="${application.args}"/> | |
| <classpath> | |
| <path path="${run.classpath}"/> | |
| </classpath> | |
| <syspropertyset> | |
| <propertyref prefix="run-sys-prop."/> | |
| <mapper from="run-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <customize/> | |
| </java> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile" name="-profile-init-check"> | |
| <fail unless="profiler.info.jvm">Must set JVM to use for profiling in profiler.info.jvm</fail> | |
| <fail unless="profiler.info.jvmargs.agent">Must set profiler agent JVM arguments in profiler.info.jvmargs.agent</fail> | |
| </target> | |
| <target depends="-init-debug-args" name="-init-macrodef-nbjpda"> | |
| <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1"> | |
| <attribute default="${main.class}" name="name"/> | |
| <attribute default="${debug.classpath}" name="classpath"/> | |
| <attribute default="" name="stopclassname"/> | |
| <sequential> | |
| <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}"> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| </nbjpdastart> | |
| </sequential> | |
| </macrodef> | |
| <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1"> | |
| <attribute default="${build.classes.dir}" name="dir"/> | |
| <sequential> | |
| <nbjpdareload> | |
| <fileset dir="@{dir}" includes="${fix.classes}"> | |
| <include name="${fix.includes}*.class"/> | |
| </fileset> | |
| </nbjpdareload> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target name="-init-debug-args"> | |
| <property name="version-output" value="java version "${ant.java.version}"/> | |
| <condition property="have-jdk-older-than-1.4"> | |
| <or> | |
| <contains string="${version-output}" substring="java version "1.0"/> | |
| <contains string="${version-output}" substring="java version "1.1"/> | |
| <contains string="${version-output}" substring="java version "1.2"/> | |
| <contains string="${version-output}" substring="java version "1.3"/> | |
| </or> | |
| </condition> | |
| <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none"> | |
| <istrue value="${have-jdk-older-than-1.4}"/> | |
| </condition> | |
| <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem"> | |
| <os family="windows"/> | |
| </condition> | |
| <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}"> | |
| <isset property="debug.transport"/> | |
| </condition> | |
| </target> | |
| <target depends="-init-debug-args" name="-init-macrodef-debug"> | |
| <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${main.class}" name="classname"/> | |
| <attribute default="${debug.classpath}" name="classpath"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <java classname="@{classname}" dir="${work.dir}" fork="true"> | |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <jvmarg line="${debug-args-line}"/> | |
| <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/> | |
| <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> | |
| <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> | |
| <jvmarg line="${run.jvmargs}"/> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| <syspropertyset> | |
| <propertyref prefix="run-sys-prop."/> | |
| <mapper from="run-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <customize/> | |
| </java> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target name="-init-macrodef-java"> | |
| <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1"> | |
| <attribute default="${main.class}" name="classname"/> | |
| <attribute default="${run.classpath}" name="classpath"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <java classname="@{classname}" dir="${work.dir}" fork="true"> | |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> | |
| <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> | |
| <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> | |
| <jvmarg line="${run.jvmargs}"/> | |
| <classpath> | |
| <path path="@{classpath}"/> | |
| </classpath> | |
| <syspropertyset> | |
| <propertyref prefix="run-sys-prop."/> | |
| <mapper from="run-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <customize/> | |
| </java> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target name="-init-macrodef-copylibs"> | |
| <macrodef name="copylibs" uri="http://www.netbeans.org/ns/j2se-project/3"> | |
| <attribute default="${manifest.file}" name="manifest"/> | |
| <element name="customize" optional="true"/> | |
| <sequential> | |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> | |
| <pathconvert property="run.classpath.without.build.classes.dir"> | |
| <path path="${run.classpath}"/> | |
| <map from="${build.classes.dir.resolved}" to=""/> | |
| </pathconvert> | |
| <pathconvert pathsep=" " property="jar.classpath"> | |
| <path path="${run.classpath.without.build.classes.dir}"/> | |
| <chainedmapper> | |
| <flattenmapper/> | |
| <globmapper from="*" to="lib/*"/> | |
| </chainedmapper> | |
| </pathconvert> | |
| <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> | |
| <copylibs compress="${jar.compress}" index="${jar.index}" indexMetaInf="${jar.index.metainf}" jarfile="${dist.jar}" manifest="@{manifest}" rebase="${copylibs.rebase}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> | |
| <fileset dir="${build.classes.dir}"/> | |
| <manifest> | |
| <attribute name="Class-Path" value="${jar.classpath}"/> | |
| <customize/> | |
| </manifest> | |
| </copylibs> | |
| </sequential> | |
| </macrodef> | |
| </target> | |
| <target name="-init-presetdef-jar"> | |
| <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1"> | |
| <jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}"> | |
| <j2seproject1:fileset dir="${build.classes.dir}"/> | |
| </jar> | |
| </presetdef> | |
| </target> | |
| <target name="-init-ap-cmdline-properties"> | |
| <property name="annotation.processing.enabled" value="true"/> | |
| <property name="annotation.processing.processors.list" value=""/> | |
| <property name="annotation.processing.processor.options" value=""/> | |
| <property name="annotation.processing.run.all.processors" value="true"/> | |
| <property name="javac.processorpath" value="${javac.classpath}"/> | |
| <property name="javac.test.processorpath" value="${javac.test.classpath}"/> | |
| <condition property="ap.supported.internal" value="true"> | |
| <not> | |
| <matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/> | |
| </not> | |
| </condition> | |
| </target> | |
| <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported"> | |
| <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}"> | |
| <isfalse value="${annotation.processing.run.all.processors}"/> | |
| </condition> | |
| <condition else="" property="ap.proc.none.internal" value="-proc:none"> | |
| <isfalse value="${annotation.processing.enabled}"/> | |
| </condition> | |
| </target> | |
| <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline"> | |
| <property name="ap.cmd.line.internal" value=""/> | |
| </target> | |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/> | |
| <!-- | |
| =================== | |
| COMPILATION SECTION | |
| =================== | |
| --> | |
| <target name="-deps-jar-init" unless="built-jar.properties"> | |
| <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/> | |
| <delete file="${built-jar.properties}" quiet="true"/> | |
| </target> | |
| <target if="already.built.jar.${basedir}" name="-warn-already-built-jar"> | |
| <echo level="warn" message="Cycle detected: Prettify was already built"/> | |
| </target> | |
| <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps"> | |
| <mkdir dir="${build.dir}"/> | |
| <touch file="${built-jar.properties}" verbose="false"/> | |
| <property file="${built-jar.properties}" prefix="already.built.jar."/> | |
| <antcall target="-warn-already-built-jar"/> | |
| <propertyfile file="${built-jar.properties}"> | |
| <entry key="${basedir}" value=""/> | |
| </propertyfile> | |
| </target> | |
| <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/> | |
| <target depends="init" name="-check-automatic-build"> | |
| <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/> | |
| </target> | |
| <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build"> | |
| <antcall target="clean"/> | |
| </target> | |
| <target depends="init,deps-jar" name="-pre-pre-compile"> | |
| <mkdir dir="${build.classes.dir}"/> | |
| </target> | |
| <target name="-pre-compile"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target if="do.depend.true" name="-compile-depend"> | |
| <pathconvert property="build.generated.subdirs"> | |
| <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false"> | |
| <include name="*"/> | |
| </dirset> | |
| </pathconvert> | |
| <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/> | |
| </target> | |
| <target depends="init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if="have.sources" name="-do-compile"> | |
| <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/> | |
| <copy todir="${build.classes.dir}"> | |
| <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> | |
| </copy> | |
| </target> | |
| <target if="has.persistence.xml" name="-copy-persistence-xml"> | |
| <mkdir dir="${build.classes.dir}/META-INF"/> | |
| <copy todir="${build.classes.dir}/META-INF"> | |
| <fileset dir="${meta.inf.dir}" includes="persistence.xml"/> | |
| </copy> | |
| </target> | |
| <target name="-post-compile"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/> | |
| <target name="-pre-compile-single"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single"> | |
| <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> | |
| <j2seproject3:force-recompile/> | |
| <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/> | |
| </target> | |
| <target name="-post-compile-single"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/> | |
| <!-- | |
| ==================== | |
| JAR BUILDING SECTION | |
| ==================== | |
| --> | |
| <target depends="init" name="-pre-pre-jar"> | |
| <dirname file="${dist.jar}" property="dist.jar.dir"/> | |
| <mkdir dir="${dist.jar.dir}"/> | |
| </target> | |
| <target name="-pre-jar"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive" name="-do-jar-without-manifest" unless="manifest.available-mkdist.available"> | |
| <j2seproject1:jar/> | |
| </target> | |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class-mkdist.available"> | |
| <j2seproject1:jar manifest="${manifest.file}"/> | |
| </target> | |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available"> | |
| <j2seproject1:jar manifest="${manifest.file}"> | |
| <j2seproject1:manifest> | |
| <j2seproject1:attribute name="Main-Class" value="${main.class}"/> | |
| </j2seproject1:manifest> | |
| </j2seproject1:jar> | |
| <echo level="info">To run this application from the command line without Ant, try:</echo> | |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> | |
| <property location="${dist.jar}" name="dist.jar.resolved"/> | |
| <pathconvert property="run.classpath.with.dist.jar"> | |
| <path path="${run.classpath}"/> | |
| <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> | |
| </pathconvert> | |
| <echo level="info">java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo> | |
| </target> | |
| <target depends="init" if="do.archive" name="-do-jar-with-libraries-create-manifest" unless="manifest.available"> | |
| <tempfile deleteonexit="true" destdir="${build.dir}" property="tmp.manifest.file"/> | |
| <touch file="${tmp.manifest.file}" verbose="false"/> | |
| </target> | |
| <target depends="init" if="do.archive+manifest.available" name="-do-jar-with-libraries-copy-manifest"> | |
| <tempfile deleteonexit="true" destdir="${build.dir}" property="tmp.manifest.file"/> | |
| <copy file="${manifest.file}" tofile="${tmp.manifest.file}"/> | |
| </target> | |
| <target depends="init,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest" if="do.archive+main.class.available" name="-do-jar-with-libraries-set-main"> | |
| <manifest file="${tmp.manifest.file}" mode="update"> | |
| <attribute name="Main-Class" value="${main.class}"/> | |
| </manifest> | |
| </target> | |
| <target depends="init,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest" if="do.archive+splashscreen.available" name="-do-jar-with-libraries-set-splashscreen"> | |
| <basename file="${application.splash}" property="splashscreen.basename"/> | |
| <mkdir dir="${build.classes.dir}/META-INF"/> | |
| <copy failonerror="false" file="${application.splash}" todir="${build.classes.dir}/META-INF"/> | |
| <manifest file="${tmp.manifest.file}" mode="update"> | |
| <attribute name="SplashScreen-Image" value="META-INF/${splashscreen.basename}"/> | |
| </manifest> | |
| </target> | |
| <target depends="init,-init-macrodef-copylibs,compile,-pre-pre-jar,-pre-jar,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest,-do-jar-with-libraries-set-main,-do-jar-with-libraries-set-splashscreen" if="do.mkdist" name="-do-jar-with-libraries-pack"> | |
| <j2seproject3:copylibs manifest="${tmp.manifest.file}"/> | |
| <echo level="info">To run this application from the command line without Ant, try:</echo> | |
| <property location="${dist.jar}" name="dist.jar.resolved"/> | |
| <echo level="info">java -jar "${dist.jar.resolved}"</echo> | |
| </target> | |
| <target depends="-do-jar-with-libraries-pack" if="do.archive" name="-do-jar-with-libraries-delete-manifest"> | |
| <delete> | |
| <fileset file="${tmp.manifest.file}"/> | |
| </delete> | |
| </target> | |
| <target depends="init,compile,-pre-pre-jar,-pre-jar,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest,-do-jar-with-libraries-set-main,-do-jar-with-libraries-set-splashscreen,-do-jar-with-libraries-pack,-do-jar-with-libraries-delete-manifest" name="-do-jar-with-libraries"/> | |
| <target name="-post-jar"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/> | |
| <!-- | |
| ================= | |
| EXECUTION SECTION | |
| ================= | |
| --> | |
| <target depends="init,compile" description="Run a main class." name="run"> | |
| <j2seproject1:java> | |
| <customize> | |
| <arg line="${application.args}"/> | |
| </customize> | |
| </j2seproject1:java> | |
| </target> | |
| <target name="-do-not-recompile"> | |
| <property name="javac.includes.binary" value=""/> | |
| </target> | |
| <target depends="init,compile-single" name="run-single"> | |
| <fail unless="run.class">Must select one file in the IDE or set run.class</fail> | |
| <j2seproject1:java classname="${run.class}"/> | |
| </target> | |
| <target depends="init,compile-test-single" name="run-test-with-main"> | |
| <fail unless="run.class">Must select one file in the IDE or set run.class</fail> | |
| <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/> | |
| </target> | |
| <!-- | |
| ================= | |
| DEBUGGING SECTION | |
| ================= | |
| --> | |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger"> | |
| <j2seproject1:nbjpdastart name="${debug.class}"/> | |
| </target> | |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test"> | |
| <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/> | |
| </target> | |
| <target depends="init,compile" name="-debug-start-debuggee"> | |
| <j2seproject3:debug> | |
| <customize> | |
| <arg line="${application.args}"/> | |
| </customize> | |
| </j2seproject3:debug> | |
| </target> | |
| <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/> | |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto"> | |
| <j2seproject1:nbjpdastart stopclassname="${main.class}"/> | |
| </target> | |
| <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/> | |
| <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single"> | |
| <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> | |
| <j2seproject3:debug classname="${debug.class}"/> | |
| </target> | |
| <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/> | |
| <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test"> | |
| <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> | |
| <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/> | |
| </target> | |
| <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/> | |
| <target depends="init" name="-pre-debug-fix"> | |
| <fail unless="fix.includes">Must set fix.includes</fail> | |
| <property name="javac.includes" value="${fix.includes}.java"/> | |
| </target> | |
| <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix"> | |
| <j2seproject1:nbjpdareload/> | |
| </target> | |
| <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/> | |
| <!-- | |
| ================= | |
| PROFILING SECTION | |
| ================= | |
| --> | |
| <target depends="profile-init,compile" description="Profile a project in the IDE." if="netbeans.home" name="profile"> | |
| <nbprofiledirect> | |
| <classpath> | |
| <path path="${run.classpath}"/> | |
| </classpath> | |
| </nbprofiledirect> | |
| <profile/> | |
| </target> | |
| <target depends="profile-init,compile-single" description="Profile a selected class in the IDE." if="netbeans.home" name="profile-single"> | |
| <fail unless="profile.class">Must select one file in the IDE or set profile.class</fail> | |
| <nbprofiledirect> | |
| <classpath> | |
| <path path="${run.classpath}"/> | |
| </classpath> | |
| </nbprofiledirect> | |
| <profile classname="${profile.class}"/> | |
| </target> | |
| <!-- | |
| ========================= | |
| APPLET PROFILING SECTION | |
| ========================= | |
| --> | |
| <target depends="profile-init,compile-single" if="netbeans.home" name="profile-applet"> | |
| <nbprofiledirect> | |
| <classpath> | |
| <path path="${run.classpath}"/> | |
| </classpath> | |
| </nbprofiledirect> | |
| <profile classname="sun.applet.AppletViewer"> | |
| <customize> | |
| <arg value="${applet.url}"/> | |
| </customize> | |
| </profile> | |
| </target> | |
| <!-- | |
| ========================= | |
| TESTS PROFILING SECTION | |
| ========================= | |
| --> | |
| <target depends="profile-init,compile-test-single" if="netbeans.home" name="profile-test-single"> | |
| <nbprofiledirect> | |
| <classpath> | |
| <path path="${run.test.classpath}"/> | |
| </classpath> | |
| </nbprofiledirect> | |
| <junit dir="${profiler.info.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" jvm="${profiler.info.jvm}" showoutput="true"> | |
| <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/> | |
| <jvmarg value="${profiler.info.jvmargs.agent}"/> | |
| <jvmarg line="${profiler.info.jvmargs}"/> | |
| <test name="${profile.class}"/> | |
| <classpath> | |
| <path path="${run.test.classpath}"/> | |
| </classpath> | |
| <syspropertyset> | |
| <propertyref prefix="test-sys-prop."/> | |
| <mapper from="test-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <formatter type="brief" usefile="false"/> | |
| <formatter type="xml"/> | |
| </junit> | |
| </target> | |
| <!-- | |
| =============== | |
| JAVADOC SECTION | |
| =============== | |
| --> | |
| <target depends="init" if="have.sources" name="-javadoc-build"> | |
| <mkdir dir="${dist.javadoc.dir}"/> | |
| <condition else="" property="javadoc.endorsed.classpath.cmd.line.arg" value="-J${endorsed.classpath.cmd.line.arg}"> | |
| <and> | |
| <isset property="endorsed.classpath.cmd.line.arg"/> | |
| <not> | |
| <equals arg1="${endorsed.classpath.cmd.line.arg}" arg2=""/> | |
| </not> | |
| </and> | |
| </condition> | |
| <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}"> | |
| <classpath> | |
| <path path="${javac.classpath}"/> | |
| </classpath> | |
| <fileset dir="${src.dir}" excludes="*.java,${excludes}" includes="${includes}"> | |
| <filename name="**/*.java"/> | |
| </fileset> | |
| <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> | |
| <include name="**/*.java"/> | |
| <exclude name="*.java"/> | |
| </fileset> | |
| <arg line="${javadoc.endorsed.classpath.cmd.line.arg}"/> | |
| </javadoc> | |
| <copy todir="${dist.javadoc.dir}"> | |
| <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}"> | |
| <filename name="**/doc-files/**"/> | |
| </fileset> | |
| <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> | |
| <include name="**/doc-files/**"/> | |
| </fileset> | |
| </copy> | |
| </target> | |
| <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview"> | |
| <nbbrowse file="${dist.javadoc.dir}/index.html"/> | |
| </target> | |
| <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/> | |
| <!-- | |
| ========================= | |
| JUNIT COMPILATION SECTION | |
| ========================= | |
| --> | |
| <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test"> | |
| <mkdir dir="${build.test.classes.dir}"/> | |
| </target> | |
| <target name="-pre-compile-test"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target if="do.depend.true" name="-compile-test-depend"> | |
| <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> | |
| </target> | |
| <target depends="init,deps-jar,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test"> | |
| <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" processorpath="${javac.test.processorpath}" srcdir="${test.src.dir}"/> | |
| <copy todir="${build.test.classes.dir}"> | |
| <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> | |
| </copy> | |
| </target> | |
| <target name="-post-compile-test"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/> | |
| <target name="-pre-compile-test-single"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,deps-jar,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single"> | |
| <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> | |
| <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/> | |
| <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" processorpath="${javac.test.processorpath}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/> | |
| <copy todir="${build.test.classes.dir}"> | |
| <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> | |
| </copy> | |
| </target> | |
| <target name="-post-compile-test-single"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/> | |
| <!-- | |
| ======================= | |
| JUNIT EXECUTION SECTION | |
| ======================= | |
| --> | |
| <target depends="init" if="have.tests" name="-pre-test-run"> | |
| <mkdir dir="${build.test.results.dir}"/> | |
| </target> | |
| <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run"> | |
| <j2seproject3:junit testincludes="**/*Test.java"/> | |
| </target> | |
| <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run"> | |
| <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> | |
| </target> | |
| <target depends="init" if="have.tests" name="test-report"/> | |
| <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/> | |
| <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/> | |
| <target depends="init" if="have.tests" name="-pre-test-run-single"> | |
| <mkdir dir="${build.test.results.dir}"/> | |
| </target> | |
| <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single"> | |
| <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> | |
| <j2seproject3:junit excludes="" includes="${test.includes}"/> | |
| </target> | |
| <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single"> | |
| <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> | |
| </target> | |
| <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/> | |
| <!-- | |
| ======================= | |
| JUNIT DEBUGGING SECTION | |
| ======================= | |
| --> | |
| <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test"> | |
| <fail unless="test.class">Must select one file in the IDE or set test.class</fail> | |
| <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/> | |
| <delete file="${test.report.file}"/> | |
| <mkdir dir="${build.test.results.dir}"/> | |
| <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}"> | |
| <customize> | |
| <syspropertyset> | |
| <propertyref prefix="test-sys-prop."/> | |
| <mapper from="test-sys-prop.*" to="*" type="glob"/> | |
| </syspropertyset> | |
| <arg value="${test.class}"/> | |
| <arg value="showoutput=true"/> | |
| <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/> | |
| <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/> | |
| </customize> | |
| </j2seproject3:debug> | |
| </target> | |
| <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test"> | |
| <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/> | |
| </target> | |
| <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/> | |
| <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test"> | |
| <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/> | |
| </target> | |
| <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/> | |
| <!-- | |
| ========================= | |
| APPLET EXECUTION SECTION | |
| ========================= | |
| --> | |
| <target depends="init,compile-single" name="run-applet"> | |
| <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> | |
| <j2seproject1:java classname="sun.applet.AppletViewer"> | |
| <customize> | |
| <arg value="${applet.url}"/> | |
| </customize> | |
| </j2seproject1:java> | |
| </target> | |
| <!-- | |
| ========================= | |
| APPLET DEBUGGING SECTION | |
| ========================= | |
| --> | |
| <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet"> | |
| <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> | |
| <j2seproject3:debug classname="sun.applet.AppletViewer"> | |
| <customize> | |
| <arg value="${applet.url}"/> | |
| </customize> | |
| </j2seproject3:debug> | |
| </target> | |
| <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/> | |
| <!-- | |
| =============== | |
| CLEANUP SECTION | |
| =============== | |
| --> | |
| <target name="-deps-clean-init" unless="built-clean.properties"> | |
| <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/> | |
| <delete file="${built-clean.properties}" quiet="true"/> | |
| </target> | |
| <target if="already.built.clean.${basedir}" name="-warn-already-built-clean"> | |
| <echo level="warn" message="Cycle detected: Prettify was already built"/> | |
| </target> | |
| <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps"> | |
| <mkdir dir="${build.dir}"/> | |
| <touch file="${built-clean.properties}" verbose="false"/> | |
| <property file="${built-clean.properties}" prefix="already.built.clean."/> | |
| <antcall target="-warn-already-built-clean"/> | |
| <propertyfile file="${built-clean.properties}"> | |
| <entry key="${basedir}" value=""/> | |
| </propertyfile> | |
| </target> | |
| <target depends="init" name="-do-clean"> | |
| <delete dir="${build.dir}"/> | |
| <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/> | |
| </target> | |
| <target name="-post-clean"> | |
| <!-- Empty placeholder for easier customization. --> | |
| <!-- You can override this target in the ../build.xml file. --> | |
| </target> | |
| <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/> | |
| <target name="-check-call-dep"> | |
| <property file="${call.built.properties}" prefix="already.built."/> | |
| <condition property="should.call.dep"> | |
| <not> | |
| <isset property="already.built.${call.subproject}"/> | |
| </not> | |
| </condition> | |
| </target> | |
| <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep"> | |
| <ant antfile="${call.script}" inheritall="false" target="${call.target}"> | |
| <propertyset> | |
| <propertyref prefix="transfer."/> | |
| <mapper from="transfer.*" to="*" type="glob"/> | |
| </propertyset> | |
| </ant> | |
| </target> | |
| </project> |