Documentation/config-labels.txt - gerrit - Git at Google

 Gerrit Code Review - Review Labels
 ==================================

 As part of the code review process, reviewers score each change with
 values for each label configured for the project.  The label values that
 a given user is allowed to set are defined according to the
 link:access-control.html#category_review_labels[access controls].  Gerrit
 comes pre-configured with the Code-Review label that can be granted to
 groups within projects, enabling functionality for that group's members.


 [[label_Code-Review]]
 Label: Code-Review
 ------------------

 The code review label is the second of two default labels that is
 configured upon the creation of a Gerrit instance.  It may have any
 meaning the project desires.  It was originally invented by the Android
 Open Source Project to mean 'I read the code and it seems reasonably
 correct'.

 The range of values is:

 * -2 Do not submit
 +
 The code is so horribly incorrect/buggy/broken that it must not be
 submitted to this project, or to this branch.  This value is valid
 across all patch sets in the same change, i.e. the reviewer must
 actively change his/her review to something else before the change
 is submittable.
 +
 *Any -2 blocks submit.*

 * -1 I would prefer that you didn't submit this
 +
 The code doesn't look right, or could be done differently, but
 the reviewer is willing to live with it as-is if another reviewer
 accepts it, perhaps because it is better than what is currently in
 the project.  Often this is also used by contributors who don't like
 the change, but also aren't responsible for the project long-term
 and thus don't have final say on change submission.
 +
 Does not block submit.

 * 0 No score
 +
 Didn't try to perform the code review task, or glanced over it but
 don't have an informed opinion yet.

 * +1 Looks good to me, but someone else must approve
 +
 The code looks right to this reviewer, but the reviewer doesn't
 have access to the `+2` value for this category.  Often this is
 used by contributors to a project who were able to review the change
 and like what it is doing, but don't have final approval over what
 gets submitted.

 * +2 Looks good to me, approved
 +
 Basically the same as `+1`, but for those who have final say over
 how the project will develop.
 +
 *Any +2 enables submit.*

 For a change to be submittable, the latest patch set must have a
 `+2 Looks good to me, approved` in this category, and no
 `-2 Do not submit`.  Thus `-2` on any patch set can block a submit,
 while `+2` on the latest patch set can enable it.

 If a Gerrit installation does not wish to use this label in any project,
 the `[label "Code-Review"]` section can be deleted from `project.config`
 in `All-Projects`.

 If a Gerrit installation or project wants to modify the description text
 associated with these label values, the text can be updated in the
 `label.Code-Review.value` fields in `project.config`.

 Additional entries could be added to `label.Code-Review.value` to
 further extend the negative and positive range, but there is likely
 little value in doing so as this only expands the middle region.  This
 label is a `MaxWithBlock` type, which means that the lowest negative
 value if present blocks a submit, while the highest positive value is
 required to enable submit.

 [[label_Verified]]
 Label: Verified
 ---------------

 The Verified label was originally invented by the Android Open Source
 Project to mean 'compiles, passes basic unit tests'.  Some CI tools
 expect to use the Verified label to vote on a change after running.

 Administrators can install the Verified label by adding the following
 text to `project.config`:

 ====
   [label "Verified"]
       function = MaxWithBlock
       value = -1 Fails
       value =  0 No score
       value = +1 Verified
 ====

 The range of values is:

 * -1 Fails
 +
 Tried to compile, but got a compile error, or tried to run tests,
 but one or more tests did not pass.
 +
 *Any -1 blocks submit.*

 * 0 No score
 +
 Didn't try to perform the verification tasks.

 * +1 Verified
 +
 Compiled (and ran tests) successfully.
 +
 *Any +1 enables submit.*

 For a change to be submittable, the change must have a `+1 Verified`
 in this label, and no `-1 Fails`.  Thus, `-1 Fails` can block a submit,
 while `+1 Verified` enables a submit.

 Additional values could also be added to this label, to allow it to
 behave more like `Code-Review` (below).  Add -2 and +2 entries to the
 `label.Verified.value` fields in `project.config` to get the same
 behavior.


 [[label_custom]]
 Your Label Here
 ---------------

 Site administrators and project owners can also define their own labels.

 See above for descriptions of how <<label_Verified,`Verified`>>
 and <<label_Code-Review,`Code-Review`>> work, and add your own
 label to `project.config` to get the same behavior over your own range
 of values, for any label you desire.

 Just like the built-in labels, users need to be given permissions to
 vote on custom labels. Permissions can either be added by manually
 editing project.config when adding the labels, or, once the labels are
 added, permission categories for those labels will show up in the
 permission editor web UI.

 Labels may be added to any project's `project.config`; the default
 labels are defined in `All-Projects`. Labels are inherited from parent
 projects; a child project may add, override, or remove labels defined in
 its parents.  Overriding a label in a child project overrides all its
 properties and values.  To remove a label in a child project, add an
 empty label with the same name as in the parent.

 Labels are laid out in the order they are specified in project.config,
 with inherited labels appearing first, providing some layout control to
 the administrator.

 [[label_name]]
 `label.Label-Name`
 ~~~~~~~~~~~~~~~~~~

 The name for a label, consisting only of alphanumeric characters and
 `-`.


 [[label_value]]
 `label.Label-Name.value`
 ~~~~~~~~~~~~~~~~~~~~~~~~

 A multi-valued key whose values are of the form `"<#> Value description
 text"`. The `<#>` may be any positive or negative number with an
 optional leading `+`.


 [[label_abbreviation]]
 `label.Label-Name.abbreviation`
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 An abbreviated name for a label shown as a compact column header, for
 example on project dashboards. Defaults to all the uppercase characters
 in the label name, e.g. `Label-Name` is abbreviated by default as `LN`.


 [[label_function]]
 `label.Label-Name.function`
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~

 The name of a function for evaluating multiple votes for a label.  This
 function is only applied if the default submit rule is used for a label.
 If you write a link:prolog-cookbook.html#HowToWriteSubmitRules[custom
 submit rule] (and do not call the default rule), the function name is
 ignored and may be treated as optional.

 Valid values are:

 * `MaxWithBlock` (default)
 +
 The lowest possible negative value, if present, blocks a submit, while
 the highest possible positive value is required to enable submit. There
 must be at least one positive value, or else submit will never be
 enabled. To permit blocking submits, ensure a negative value is defined.

 * `MaxNoBlock`
 +
 The highest possible positive value is required to enable submit, but
 the lowest possible negative value will not block the change.

 * `NoBlock`/`NoOp`
 +
 The label is purely informational and values are not considered when
 determining whether a change is submittable.


 [[label_copyMinScore]]
 `label.Label-Name.copyMinScore`
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 If true, the lowest possible negative value for the label is copied
 forward when a new patch set is uploaded.


 [[label_canOverride]]
 `label.Label-Name.canOverride`
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 If false, the label cannot be overridden by child projects. Any
 configuration for this label in child projects will be ignored. Defaults
 to true.


 [[label_example]]
 Example
 ~~~~~~~

 To define a new 3-valued category that behaves exactly like `Verified`,
 but has different names/labels:

 ====
   [label "Copyright-Check"]
       function = MaxWithBlock
       value = -1 Do not have copyright
       value =  0 No score
       value = +1 Copyright clear
 ====

 The new column will appear at the end of the table, and `-1 Do not have
 copyright` will block submit, while `+1 Copyright clear` is required to
 enable submit.

 GERRIT
 ------
 Part of link:index.html[Gerrit Code Review]
	Gerrit Code Review - Review Labels
	==================================

	As part of the code review process, reviewers score each change with
	values for each label configured for the project. The label values that
	a given user is allowed to set are defined according to the
	link:access-control.html#category_review_labels[access controls]. Gerrit
	comes pre-configured with the Code-Review label that can be granted to
	groups within projects, enabling functionality for that group's members.


	[[label_Code-Review]]
	Label: Code-Review
	------------------

	The code review label is the second of two default labels that is
	configured upon the creation of a Gerrit instance. It may have any
	meaning the project desires. It was originally invented by the Android
	Open Source Project to mean 'I read the code and it seems reasonably
	correct'.

	The range of values is:

	* -2 Do not submit
	+
	The code is so horribly incorrect/buggy/broken that it must not be
	submitted to this project, or to this branch. This value is valid
	across all patch sets in the same change, i.e. the reviewer must
	actively change his/her review to something else before the change
	is submittable.
	+
	Any -2 blocks submit.

	* -1 I would prefer that you didn't submit this
	+
	The code doesn't look right, or could be done differently, but
	the reviewer is willing to live with it as-is if another reviewer
	accepts it, perhaps because it is better than what is currently in
	the project. Often this is also used by contributors who don't like
	the change, but also aren't responsible for the project long-term
	and thus don't have final say on change submission.
	+
	Does not block submit.

	* 0 No score
	+
	Didn't try to perform the code review task, or glanced over it but
	don't have an informed opinion yet.

	* +1 Looks good to me, but someone else must approve
	+
	The code looks right to this reviewer, but the reviewer doesn't
	have access to the `+2` value for this category. Often this is
	used by contributors to a project who were able to review the change
	and like what it is doing, but don't have final approval over what
	gets submitted.

	* +2 Looks good to me, approved
	+
	Basically the same as `+1`, but for those who have final say over
	how the project will develop.
	+
	Any +2 enables submit.

	For a change to be submittable, the latest patch set must have a
	`+2 Looks good to me, approved` in this category, and no
	`-2 Do not submit`. Thus `-2` on any patch set can block a submit,
	while `+2` on the latest patch set can enable it.

	If a Gerrit installation does not wish to use this label in any project,
	the `[label "Code-Review"]` section can be deleted from `project.config`
	in `All-Projects`.

	If a Gerrit installation or project wants to modify the description text
	associated with these label values, the text can be updated in the
	`label.Code-Review.value` fields in `project.config`.

	Additional entries could be added to `label.Code-Review.value` to
	further extend the negative and positive range, but there is likely
	little value in doing so as this only expands the middle region. This
	label is a `MaxWithBlock` type, which means that the lowest negative
	value if present blocks a submit, while the highest positive value is
	required to enable submit.

	[[label_Verified]]
	Label: Verified
	---------------

	The Verified label was originally invented by the Android Open Source
	Project to mean 'compiles, passes basic unit tests'. Some CI tools
	expect to use the Verified label to vote on a change after running.

	Administrators can install the Verified label by adding the following
	text to `project.config`:

	====
	[label "Verified"]
	function = MaxWithBlock
	value = -1 Fails
	value = 0 No score
	value = +1 Verified
	====

	The range of values is:

	* -1 Fails
	+
	Tried to compile, but got a compile error, or tried to run tests,
	but one or more tests did not pass.
	+
	Any -1 blocks submit.

	* 0 No score
	+
	Didn't try to perform the verification tasks.

	* +1 Verified
	+
	Compiled (and ran tests) successfully.
	+
	Any +1 enables submit.

	For a change to be submittable, the change must have a `+1 Verified`
	in this label, and no `-1 Fails`. Thus, `-1 Fails` can block a submit,
	while `+1 Verified` enables a submit.

	Additional values could also be added to this label, to allow it to
	behave more like `Code-Review` (below). Add -2 and +2 entries to the
	`label.Verified.value` fields in `project.config` to get the same
	behavior.


	[[label_custom]]
	Your Label Here
	---------------

	Site administrators and project owners can also define their own labels.

	See above for descriptions of how <<label_Verified,`Verified`>>
	and <<label_Code-Review,`Code-Review`>> work, and add your own
	label to `project.config` to get the same behavior over your own range
	of values, for any label you desire.

	Just like the built-in labels, users need to be given permissions to
	vote on custom labels. Permissions can either be added by manually
	editing project.config when adding the labels, or, once the labels are
	added, permission categories for those labels will show up in the
	permission editor web UI.

	Labels may be added to any project's `project.config`; the default
	labels are defined in `All-Projects`. Labels are inherited from parent
	projects; a child project may add, override, or remove labels defined in
	its parents. Overriding a label in a child project overrides all its
	properties and values. To remove a label in a child project, add an
	empty label with the same name as in the parent.

	Labels are laid out in the order they are specified in project.config,
	with inherited labels appearing first, providing some layout control to
	the administrator.

	[[label_name]]
	`label.Label-Name`
	~~~~~~~~~~~~~~~~~~

	The name for a label, consisting only of alphanumeric characters and
	`-`.


	[[label_value]]
	`label.Label-Name.value`
	~~~~~~~~~~~~~~~~~~~~~~~~

	A multi-valued key whose values are of the form `"<#> Value description
	text"`. The `<#>` may be any positive or negative number with an
	optional leading `+`.


	[[label_abbreviation]]
	`label.Label-Name.abbreviation`
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	An abbreviated name for a label shown as a compact column header, for
	example on project dashboards. Defaults to all the uppercase characters
	in the label name, e.g. `Label-Name` is abbreviated by default as `LN`.


	[[label_function]]
	`label.Label-Name.function`
	~~~~~~~~~~~~~~~~~~~~~~~~~~~

	The name of a function for evaluating multiple votes for a label. This
	function is only applied if the default submit rule is used for a label.
	If you write a link:prolog-cookbook.html#HowToWriteSubmitRules[custom
	submit rule] (and do not call the default rule), the function name is
	ignored and may be treated as optional.

	Valid values are:

	* `MaxWithBlock` (default)
	+
	The lowest possible negative value, if present, blocks a submit, while
	the highest possible positive value is required to enable submit. There
	must be at least one positive value, or else submit will never be
	enabled. To permit blocking submits, ensure a negative value is defined.

	* `MaxNoBlock`
	+
	The highest possible positive value is required to enable submit, but
	the lowest possible negative value will not block the change.

	* `NoBlock`/`NoOp`
	+
	The label is purely informational and values are not considered when
	determining whether a change is submittable.


	[[label_copyMinScore]]
	`label.Label-Name.copyMinScore`
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	If true, the lowest possible negative value for the label is copied
	forward when a new patch set is uploaded.


	[[label_canOverride]]
	`label.Label-Name.canOverride`
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	If false, the label cannot be overridden by child projects. Any
	configuration for this label in child projects will be ignored. Defaults
	to true.


	[[label_example]]
	Example
	~~~~~~~

	To define a new 3-valued category that behaves exactly like `Verified`,
	but has different names/labels:

	====
	[label "Copyright-Check"]
	function = MaxWithBlock
	value = -1 Do not have copyright
	value = 0 No score
	value = +1 Copyright clear
	====

	The new column will appear at the end of the table, and `-1 Do not have
	copyright` will block submit, while `+1 Copyright clear` is required to
	enable submit.

	GERRIT
	------
	Part of link:index.html[Gerrit Code Review]