Documentation/install-quick.txt - gerrit - Git at Google

 Gerrit Code Review - Quick get started guide
 ============================================

 ****
 This guide was made with the impatient in mind, ready to try out Gerrit on their
 own server but not prepared to make the full installation procedure yet.

 Explanation is sparse and you should not use a server installed this way in a
 live setup, this is made with proof of concept activities in mind.

 It is presumed you install it on a Unix based server such as any of the Linux
 flavors or BSD.

 It's also presumed that you have access to an OpenID enabled email address.
 Examples of OpenID enable email providers are gmail, yahoo and hotmail.
 It's also possible to register a custom email address with OpenID, but that is
 outside the scope of this quick installation guide. For testing purposes one of
 the above providers should be fine. Please note that network access to the
 OpenID provider you choose is necessary for both you and your Gerrit instance.
 ****


 [[requirements]]
 Requirements
 ------------

 Most distributions come with Java today. Do you already have Java installed?

 ----
   $ java -version
   java version "1.6.0_26"
   Java(TM) SE Runtime Environment (build 1.6.0_26-b03-384-10M3425)
     Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-384, mixed mode)
 ----

 If Java isn't installed, get it:

 * JDK, minimum version 1.6 http://www.oracle.com/technetwork/java/javase/downloads/index.html[Download]


 [[user]]
 Create a user to host the Gerrit service
 ----------------------------------------

 We will run the service as a non privileged user on your system.
 First create the user and then become the user:

 ----
   sudo adduser gerrit2
   sudo su gerrit2
 ----

 If you don't have root privileges you could skip this step and run gerrit
 as your own user as well.


 [[download]]
 Download Gerrit
 ---------------

 It's time to download the archive that contains the gerrit web and ssh service.

 You can choose from different versions to download from here:

 * http://code.google.com/p/gerrit/downloads/list[A list of releases available]

 This tutorial is based on version 2.2.1, and you can download that from this link

 * http://code.google.com/p/gerrit/downloads/detail?name=gerrit-2.2.1.war[Link to the 2.2.1 war archive]


 [[initialization]]
 Initialize the Site
 -------------------

 It's time to run the initialization, and with the batch switch enabled, we don't have to answer any questions at all:

 ----

 gerrit2@host:~$ java -jar gerrit.war init --batch -d ~/gerrit_testsite
 Generating SSH host key ... rsa(simple)... done
 Initialized /home/gerrit2/gerrit_testsite
 Executing /home/gerrit2/gerrit_testsite/bin/gerrit.sh start
 Starting Gerrit Code Review: OK
 gerrit2@host:~$

 ----

 When the init is complete, you can review your settings in the
 file `'$site_path/etc/gerrit.config'`.

 Installation is complete and you're ready to start up Gerrit!

 ----
 gerrit2@host:~$ $site_path/bin/gerrit.sh start
 Starting Gerrit Code Review: OK
 Waiting for server to start ... OK
 ----

 [[usersetup]]
 The first user
 --------------

 It's time to exit the gerrit2 account as you now have Gerrit running on your
 host and setup your first workspace.

 Start a shell with the credentials of the account you will perform
 development under.

 Check whether there are any ssh keys already. You're looking for two files,
 id_rsa and id_rsa.pub.

 ----
 user@host:~$ ls .ssh
 authorized_keys  config  id_rsa  id_rsa.pub  known_hosts
 ----

 If you have the files, you may skip the key generating step.

 If you don't see the files in your listing, your will have to generate rsa
 keys for your ssh sessions:

 SSH key generation
 ~~~~~~~~~~~~~~~~~~

 *Please don't generate new keys if you already have a valid keypair!*
 *They will be overwritten!*

 ----
 user@host:~$ ssh-keygen -t rsa
 Generating public/private rsa key pair.
 Enter file in which to save the key (/home/user/.ssh/id_rsa):
 Created directory '/home/user/.ssh'.
 Enter passphrase (empty for no passphrase):
 Enter same passphrase again:
 Your identification has been saved in /home/user/.ssh/id_rsa.
 Your public key has been saved in /home/user/.ssh/id_rsa.pub.
 The key fingerprint is:
 00:11:22:00:11:22:00:11:44:00:11:22:00:11:22:99 user@host
 The key's randomart image is:
 +--[ RSA 2048]----+
 |     ..+.*=+oo.*E|
 |      u.OoB.. . +|
 |       ..*.      |
 |       o         |
 |      . S ..     |
 |                 |
 |                 |
 |          ..     |
 |                 |
 +-----------------+

 user@host:~$
 ----

 Registering your key in Gerrit
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 Open a browser and enter the canonical url you used above when initializing
 Gerrit.

 ----
 Canonical URL                  [http://localhost:8080/]:
 ----

 Register a new account in Gerrit through the web interface with the
 email address of your choice.
 The first user to sign-in and register an account will be
 automatically placed into the fully privileged Administrators group,
 permitting server management over the web and over SSH.  Subsequent
 users will be automatically registered as unprivileged users.

 Once signed in as your user, you find a little wizard to get you started.
 The wizard helps you fill out:

 * Real name (visible name in Gerrit)
 * Register your email (it must be confirmed later)
 * Select a username with which to communicate with Gerrit over ssh+git

 * The server will ask you for an RSA public key.
 That's the key we generated above, and it's time to make sure that Gerrit knows
 about our new key and can identify us by it.

 ----
 user@host:~$ cat .ssh/id_rsa.pub
 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA5E785mWtMckorP5v40PyFeui9T50dKpaGYw67Mlv2J3aGBG3tS0qBQxKEpiV0J4+W0RgQHbWfNqdUYen9bC5VVH/GatYWkpL9TjjUcHzF1rX3Eyv7PHuHLAyd/8Zdv6R3saF+hNpp1JW0BSa7HXzK7iNCVA3kBuBthxeGh3OoFbaXHn1zwwVQw8I5+Lp9OOIY7sJEsM/kW699XDV6z2zlkByNVEp45j+g26x5rCnGS8GJM7A0uHsaWJddO6TiyR6/2SOBF1VtKw49XLTQcmDInFAZzUsAZSDKlfYloPkpA6YdqeG0eJqau+jtzuigydoVj4j9xidcJ9HtxZcJNuraw== user@host
 ----

 Copy the string starting with ssh-rsa to your clipboard and then paste it
 into the box for RSA keys. Make *absolutely sure* no extra spaces or line feeds
 are entered in the middle of the RSA string.

 Verify that the ssh connection works for you.

 ----
  user@host:~$ ssh user@localhost -p 29418
  The authenticity of host '[localhost]:29418 ([127.0.0.1]:29418)' can't be established.
  RSA key fingerprint is db:07:3d:c2:94:25:b5:8d:ac:bc:b5:9e:2f:95:5f:4a.
  Are you sure you want to continue connecting (yes/no)? yes
  Warning: Permanently added '[localhost]:29418' (RSA) to the list of known hosts.

   ****    Welcome to Gerrit Code Review    ****

   Hi user, you have successfully connected over SSH.

   Unfortunately, interactive shells are disabled.
     To clone a hosted Git repository, use:

   git clone ssh://user@localhost:29418/REPOSITORY_NAME.git

   user@host:~$
 ----

 Project creation
 ----------------

 Your base Gerrit server is now running and you have a user that's ready
 to interact with it.  You now have two options, either you create a new
 test project to work with or you already have a git with history that
 you would like to import into gerrit and try out code review on.

 New project from scratch
 ~~~~~~~~~~~~~~~~~~~~~~~~
 If you choose to create a new repository from scratch, it's easier for
 you to create a project with an initial commit in it. That way first
 time setup between client and server is easier.

 This is done via the SSH port:

 ----
   user@host:~$ ssh -p 29418 user@localhost gerrit create-project --empty-commit --name demo-project
   user@host:~$
 ----

 This will create a test repository to work with.

 Previous project exist
 ~~~~~~~~~~~~~~~~~~~~~~

 The other alternative is if you already have a git project that you
 want to try out Gerrit on.
 First you have to create the project, this is done via the SSH port:

 ----
   user@host:~$ ssh -p 29418 user@localhost gerrit create-project --name demo-project
   user@host:~$
 ----

 After that it's time to upload the previous history to the server:

 ----
   user@host:~/my-project$ git push ssh://user@localhost:29418/demo-project *:*
     Counting objects: 2011, done.
     Writing objects: 100% (2011/2011), 456293 bytes, done.
     Total 2011 (delta 0), reused 0 (delta 0)
     * [new branch]      master -> master

 ----

 This will create a test repository to work with.


 My first change
 ---------------

 Download a local clone of the repository

 ----
   user@host:~$ git clone ssh://user@host:29418/demo-project
   Cloning into demo-project...
   remote: Counting objects: 2, done
   remote: Finding sources: 100% (2/2)
   remote: Total 2 (delta 0), reused 0 (delta 0)
   user@host:~$
 ----

 Then make a change to it and upload it as a reviewable change in Gerrit.

 ----
   date > testfile.txt
   git add testfile.txt
   git commit -m "My pretty test commit"
     [master ff643a5] My pretty test commit
     1 files changed, 1 insertions(+), 0 deletions(-)
     create mode 100644 testfile.txt
 ----

 Usually when you push to a remote git, you push to the reference
 `'/refs/heads/branch'`, but when working with Gerrit you have to push to a
 virtual branch representing "code review before submittal to branch".
 This virtual name space is known as /refs/for/<branch>

 ----
   git push origin HEAD:refs/for/master
     Counting objects: 4, done.
     Writing objects: 100% (3/3), 293 bytes, done.
     Total 3 (delta 0), reused 0 (delta 0)
     remote:
     remote: New Changes:
     remote:   http://localhost:8080/1
     remote:
     To ssh://user@localhost:29418/demo-project
      * [new branch]      HEAD -> refs/for/master
 ----

 You should now be able to access your change by browsing to the http URL
 suggested above, http://localhost:8080/1


 Quick Installation Complete
 ---------------------------

 This covers the scope of getting Gerrit started and your first change uploaded.
 It doesn't give any clue as to how the review workflow works, please find
 link:http://source.android.com/submit-patches/workflow[Default Workflow] to
 learn more about the workflow of Gerrit.

 To read more on the installation of Gerrit please read link:install.html[the detailed
 installation page].


 GERRIT
 ------

 Part of link:index.html[Gerrit Code Review]
	Gerrit Code Review - Quick get started guide
	============================================

	****
	This guide was made with the impatient in mind, ready to try out Gerrit on their
	own server but not prepared to make the full installation procedure yet.

	Explanation is sparse and you should not use a server installed this way in a
	live setup, this is made with proof of concept activities in mind.

	It is presumed you install it on a Unix based server such as any of the Linux
	flavors or BSD.

	It's also presumed that you have access to an OpenID enabled email address.
	Examples of OpenID enable email providers are gmail, yahoo and hotmail.
	It's also possible to register a custom email address with OpenID, but that is
	outside the scope of this quick installation guide. For testing purposes one of
	the above providers should be fine. Please note that network access to the
	OpenID provider you choose is necessary for both you and your Gerrit instance.
	****


	[[requirements]]
	Requirements
	------------

	Most distributions come with Java today. Do you already have Java installed?

	----
	$ java -version
	java version "1.6.0_26"
	Java(TM) SE Runtime Environment (build 1.6.0_26-b03-384-10M3425)
	Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-384, mixed mode)
	----

	If Java isn't installed, get it:

	* JDK, minimum version 1.6 http://www.oracle.com/technetwork/java/javase/downloads/index.html[Download]


	[[user]]
	Create a user to host the Gerrit service
	----------------------------------------

	We will run the service as a non privileged user on your system.
	First create the user and then become the user:

	----
	sudo adduser gerrit2
	sudo su gerrit2
	----

	If you don't have root privileges you could skip this step and run gerrit
	as your own user as well.


	[[download]]
	Download Gerrit
	---------------

	It's time to download the archive that contains the gerrit web and ssh service.

	You can choose from different versions to download from here:

	* http://code.google.com/p/gerrit/downloads/list[A list of releases available]

	This tutorial is based on version 2.2.1, and you can download that from this link

	* http://code.google.com/p/gerrit/downloads/detail?name=gerrit-2.2.1.war[Link to the 2.2.1 war archive]


	[[initialization]]
	Initialize the Site
	-------------------

	It's time to run the initialization, and with the batch switch enabled, we don't have to answer any questions at all:

	----

	gerrit2@host:~$ java -jar gerrit.war init --batch -d ~/gerrit_testsite
	Generating SSH host key ... rsa(simple)... done
	Initialized /home/gerrit2/gerrit_testsite
	Executing /home/gerrit2/gerrit_testsite/bin/gerrit.sh start
	Starting Gerrit Code Review: OK
	gerrit2@host:~$

	----

	When the init is complete, you can review your settings in the
	file `'$site_path/etc/gerrit.config'`.

	Installation is complete and you're ready to start up Gerrit!

	----
	gerrit2@host:~$ $site_path/bin/gerrit.sh start
	Starting Gerrit Code Review: OK
	Waiting for server to start ... OK
	----

	[[usersetup]]
	The first user
	--------------

	It's time to exit the gerrit2 account as you now have Gerrit running on your
	host and setup your first workspace.

	Start a shell with the credentials of the account you will perform
	development under.

	Check whether there are any ssh keys already. You're looking for two files,
	id_rsa and id_rsa.pub.

	----
	user@host:~$ ls .ssh
	authorized_keys config id_rsa id_rsa.pub known_hosts
	----

	If you have the files, you may skip the key generating step.

	If you don't see the files in your listing, your will have to generate rsa
	keys for your ssh sessions:

	SSH key generation
	~~~~~~~~~~~~~~~~~~

	Please don't generate new keys if you already have a valid keypair!
	They will be overwritten!

	----
	user@host:~$ ssh-keygen -t rsa
	Generating public/private rsa key pair.
	Enter file in which to save the key (/home/user/.ssh/id_rsa):
	Created directory '/home/user/.ssh'.
	Enter passphrase (empty for no passphrase):
	Enter same passphrase again:
	Your identification has been saved in /home/user/.ssh/id_rsa.
	Your public key has been saved in /home/user/.ssh/id_rsa.pub.
	The key fingerprint is:
	00:11:22:00:11:22:00:11:44:00:11:22:00:11:22:99 user@host
	The key's randomart image is:
	+--[ RSA 2048]----+
	\| ..+.=+oo.E\|
	\| u.OoB.. . +\|
	\| ..*. \|
	\| o \|
	\| . S .. \|
	\| \|
	\| \|
	\| .. \|
	\| \|
	+-----------------+

	user@host:~$
	----

	Registering your key in Gerrit
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	Open a browser and enter the canonical url you used above when initializing
	Gerrit.

	----
	Canonical URL [http://localhost:8080/]:
	----

	Register a new account in Gerrit through the web interface with the
	email address of your choice.
	The first user to sign-in and register an account will be
	automatically placed into the fully privileged Administrators group,
	permitting server management over the web and over SSH. Subsequent
	users will be automatically registered as unprivileged users.

	Once signed in as your user, you find a little wizard to get you started.
	The wizard helps you fill out:

	* Real name (visible name in Gerrit)
	* Register your email (it must be confirmed later)
	* Select a username with which to communicate with Gerrit over ssh+git

	* The server will ask you for an RSA public key.
	That's the key we generated above, and it's time to make sure that Gerrit knows
	about our new key and can identify us by it.

	----
	user@host:~$ cat .ssh/id_rsa.pub
	ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA5E785mWtMckorP5v40PyFeui9T50dKpaGYw67Mlv2J3aGBG3tS0qBQxKEpiV0J4+W0RgQHbWfNqdUYen9bC5VVH/GatYWkpL9TjjUcHzF1rX3Eyv7PHuHLAyd/8Zdv6R3saF+hNpp1JW0BSa7HXzK7iNCVA3kBuBthxeGh3OoFbaXHn1zwwVQw8I5+Lp9OOIY7sJEsM/kW699XDV6z2zlkByNVEp45j+g26x5rCnGS8GJM7A0uHsaWJddO6TiyR6/2SOBF1VtKw49XLTQcmDInFAZzUsAZSDKlfYloPkpA6YdqeG0eJqau+jtzuigydoVj4j9xidcJ9HtxZcJNuraw== user@host
	----

	Copy the string starting with ssh-rsa to your clipboard and then paste it
	into the box for RSA keys. Make absolutely sure no extra spaces or line feeds
	are entered in the middle of the RSA string.

	Verify that the ssh connection works for you.

	----
	user@host:~$ ssh user@localhost -p 29418
	The authenticity of host '[localhost]:29418 ([127.0.0.1]:29418)' can't be established.
	RSA key fingerprint is db:07:3d:c2:94:25:b5:8d:ac:bc:b5:9e:2f:95:5f:4a.
	Are you sure you want to continue connecting (yes/no)? yes
	Warning: Permanently added '[localhost]:29418' (RSA) to the list of known hosts.

	** Welcome to Gerrit Code Review **

	Hi user, you have successfully connected over SSH.

	Unfortunately, interactive shells are disabled.
	To clone a hosted Git repository, use:

	git clone ssh://user@localhost:29418/REPOSITORY_NAME.git

	user@host:~$
	----

	Project creation
	----------------

	Your base Gerrit server is now running and you have a user that's ready
	to interact with it. You now have two options, either you create a new
	test project to work with or you already have a git with history that
	you would like to import into gerrit and try out code review on.

	New project from scratch
	~~~~~~~~~~~~~~~~~~~~~~~~
	If you choose to create a new repository from scratch, it's easier for
	you to create a project with an initial commit in it. That way first
	time setup between client and server is easier.

	This is done via the SSH port:

	----
	user@host:~$ ssh -p 29418 user@localhost gerrit create-project --empty-commit --name demo-project
	user@host:~$
	----

	This will create a test repository to work with.

	Previous project exist
	~~~~~~~~~~~~~~~~~~~~~~

	The other alternative is if you already have a git project that you
	want to try out Gerrit on.
	First you have to create the project, this is done via the SSH port:

	----
	user@host:~$ ssh -p 29418 user@localhost gerrit create-project --name demo-project
	user@host:~$
	----

	After that it's time to upload the previous history to the server:

	----
	user@host:~/my-project$ git push ssh://user@localhost:29418/demo-project :
	Counting objects: 2011, done.
	Writing objects: 100% (2011/2011), 456293 bytes, done.
	Total 2011 (delta 0), reused 0 (delta 0)
	* [new branch] master -> master

	----

	This will create a test repository to work with.


	My first change
	---------------

	Download a local clone of the repository

	----
	user@host:~$ git clone ssh://user@host:29418/demo-project
	Cloning into demo-project...
	remote: Counting objects: 2, done
	remote: Finding sources: 100% (2/2)
	remote: Total 2 (delta 0), reused 0 (delta 0)
	user@host:~$
	----

	Then make a change to it and upload it as a reviewable change in Gerrit.

	----
	date > testfile.txt
	git add testfile.txt
	git commit -m "My pretty test commit"
	[master ff643a5] My pretty test commit
	1 files changed, 1 insertions(+), 0 deletions(-)
	create mode 100644 testfile.txt
	----

	Usually when you push to a remote git, you push to the reference
	`'/refs/heads/branch'`, but when working with Gerrit you have to push to a
	virtual branch representing "code review before submittal to branch".
	This virtual name space is known as /refs/for/<branch>

	----
	git push origin HEAD:refs/for/master
	Counting objects: 4, done.
	Writing objects: 100% (3/3), 293 bytes, done.
	Total 3 (delta 0), reused 0 (delta 0)
	remote:
	remote: New Changes:
	remote: http://localhost:8080/1
	remote:
	To ssh://user@localhost:29418/demo-project
	* [new branch] HEAD -> refs/for/master
	----

	You should now be able to access your change by browsing to the http URL
	suggested above, http://localhost:8080/1


	Quick Installation Complete
	---------------------------

	This covers the scope of getting Gerrit started and your first change uploaded.
	It doesn't give any clue as to how the review workflow works, please find
	link:http://source.android.com/submit-patches/workflow[Default Workflow] to
	learn more about the workflow of Gerrit.

	To read more on the installation of Gerrit please read link:install.html[the detailed
	installation page].


	GERRIT
	------

	Part of link:index.html[Gerrit Code Review]