@PLUGIN@

The @PLUGIN@ plugin provides a mechanism to manage tasks which need to be performed on changes. The @PLUGIN@ plugin creates a common place where tasks can be defined, along with a common way to expose and query this information. Task definition includes defining which changes each task applies to, and how to determine the status for each task. Tasks are organized hierarchically. This hierarchy is considered for task applicability and status.

An important use case of the @PLUGIN@ plugin is to have a common place for CI systems to define which changes they will operate on, and when they will do so. This makes it possible for independent and unrelated teams to setup entirely independent CI systems which operate on different sets of changes, all while exposing these applicability relations to Gerrit and other teams and users. This also makes it possible for work for a single change to be split across multiple cooperating CI systems so that assessments can be staged and gated upon various other tasks or assessments first completing (or passing).

Exposing task applicability information helps users determine via Gerrit which, if any, system will “take care” of their changes. Users can thus figure this out without having the knowledge of “how to”, or even “the ability to” query the configuration of external CI systems. This also makes it possible for conflicting systems to more easily be detected in cases when more than one system is mistakenly configured to be responsible for the same changes.

Exposing task hierarchy information via Gerrit helps users understand the workflow that is expected of their changes. It helps them visualize task requirements and which tasks are expected to be completed before another task will even be attempted. It helps them understand how their changes are, or are not progressing through the outlined stages.

Exposing task status information helps users and CI systems determine via Gerrit when it is appropriate for them to take action (to perform their task). It helps them identify blocking tasks. It helps them figure out what they can do, or perhaps who they need to talk to to ensure that their changes do make progress through all their hoops.

Task definitions can be split up across multiple files/refs, and even across multiple projects. This splitting of task definitions allows the control of task definitions to be delegated to different entities. By aligning ref boundaries with controlling entities, the standard gerrit ref ACL mechanisms may be used to control who can define tasks on which changes.

Task Status

Task status is used to indicate either the readiness of a task for execution if it has not yet completed execution, or the outcome of the task if it has completed execution. Tasks generally progress from WAITING to READY as their subtasks complete, and then from READY to PASS once the task itself completes.

A task with a WAITING status is not yet ready to execute. A task in this state is blocked by its subtasks which are not yet in the PASS state.

A task with a READY status is ready to be executed. All of its subtasks are in the PASS state.

A task with a PASS status meets all the criteria for READY, and has executed and was successful.

A task with a FAIL status has executed and was unsuccessful.

A task with a INVALID status has an invalid/missing definition or an invalid query.

Tasks

Tasks can either be root tasks, or subtasks. Tasks are defined in the All-Projects project, on the refs/meta/config branch, in a file named task.config. This file uses the gitconfig format to define tasks. The special “True” keyword may be used as any query definition to indicate an always matching query. The following keys may be defined in any task section:

applicable

: This key defines a query that is used to determine whether a task is applicable to each change. Since tasks are defined hierarchically, the applicability of subtasks is inherently limited by the applicability of all tasks above them in the hierarchy.

Example:

    applicable = status:open

fail

: This key defines a query that is used to determine whether a task has already executed and failed for each change.

Example:

    fail = label:verified-1

in-progress

: This key defines a query that is used to determine whether a task is currently in-progress or not. A CI system may use this to ensure that it only runs one verification instance for a specific change. Either a pass or fail key is mandatory for leaf tasks. A task with a fail criteria, but no pass criteria, will pass if it otherwise would be ready. Setting this to “True” is useful for defining blocking criteria that do not actually have a task to execute.

Example:

    in-progress = label:patchset-lock,user=jenkins

pass

: This key defines a query that is used to determine whether a task has already executed and passed for each change. Either a pass or fail key is mandatory for leaf tasks. Tasks with no defined pass criteria and with defined subtasks are valid, but they are only applicable when at least one subtask is applicable. Setting this to “True” is useful for defining informational tasks that are not really expected to execute.

A task with a fail key but no pass key has an implied pass key which is the opposite of the fail key as if the fail had a NOT in front of it. Such tasks can only pass, fail, or be waiting for their subtasks, they can never be ready! If they have not failed, and their subtasks have passed, they have passed also.

Example:

    pass = label:verified+1

ready-hint

: This key defines a hint when a task is READY describing what accomplishing the tasks entails. This is meant to be a hint for humans and may be used as a tool-tip.

Example:

    ready-hint = Needs to be verified by Jenkins

fail-hint

: This key defines a hint when a task is in the FAIL state describing why the task is failing. This is meant to be a hint for humans and may be used as a tool-tip.

Example:

    fail-hint = Blocked by a negative review score

preload-task

: This key defines a task whose attributes will be preloaded into the current task before the current task's attributes are set. Most attributes defined in the preload-task will be loaded first, and will be overridden by attributes from the current task if they redefined in the current task. Attributes which are lists (such as subtasks) or maps (such as properties), will be preloaded by the preload-task and then extended with the attributes from the current task. See Optional Tasks for how to define optional preload-tasks.

Example:

    preload-task = Base Jenkins Verification # has a pass criteria and hints

subtask

: This key lists the name of a subtask of the current task. This key may be used several times in a task section to define more than one subtask for a particular task. See Optional Tasks for how to define optional subtasks.

Example:

    subtask = "Code Review"
    subtask = "License Approval"
    ...
    [task "Code Review"]
    ...
    [task "License Approval"]
    ...

subtasks-factory

: A subtasks-factory key specifies a task-factory, which generates zero or more tasks that are subtasks of the current task. This key may be used several times in a task section to reference tasks-factory sections.

Example:

    subtasks-factory = "static tasks factory"
    ...
    [tasks-factory "static tasks factory"]
    ...

subtasks-external

: This key defines a file containing subtasks of the current task. This key may be used several times in a task section to define more than one file containing subtasks for a particular task. The subtasks-external key points to an external file defined by external section. Note: all of the tasks in the referenced file will be included as subtasks of the current task!

Example:

    subtasks-external = my-external

subtasks-file

: This key defines a file containing subtasks of the current task. This key may be used several times in a task section to define more than one file containing subtasks for a particular task. The subtasks-file key points to a file under the top level task directory in the same project and ref as the current task file. Note: all of the tasks in the referenced file will be included as subtasks of the current task!

Example:

    subtasks-file = common.config  # references the file named task/common.config

Root Tasks

Root tasks typically define the “final verification” tasks for changes. Each root task likely defines a single CI system which is responsible for verifying and possibly submitting the changes which are managed by that CI system. applicable queries for all root tasks should generally be defined in a non overlapping fashion.

Root tasks are defined using “root” sections. A sample task.config which defines 3 non overlapping CI systems might look like this:

[root "Jenkins Build"]
   applicable = status:open AND (project:a OR project:b) AND -branch:master
   ...

[root "Jenkins Build and Test"]
   applicable = status:open AND (project:a OR project:b) AND branch:master
   ...

[root "Buildbot"]
   applicable = status:open AND project:c
   ...

Subtasks

Subtasks define tasks that must pass before their parent task state is considered READY or PASS. Subtasks make it possible to define task execution dependencies and ordering. Subtasks typically define all the things that are required for change submission except for the final criteria that will be assessed by the final verification defined by the change's root task. This may include tasks that need to be executed by humans, such as approvals like code-review, along with automated tasks such as tests, or static analysis tool executions.

Subtasks are defined using a “task” section. An example subtask definition:

[task "Code Review"]
    pass = label:code-review+2
    fail = label:code-review-2
    preload-task = Optional Subtask {$_name} |

To define an alternate task to load when an optional task does not exist, list the alterante task name after the pipe (|) character. This feature may be chained together as many times as needed.

    subtask = Optional Subtask {$_name} |
              Backup Optional Subtask {$_name} Backup |
              Default Subtask # Must exist if the above two don't!

Tasks-Factory

A tasks-factory section supports all the keys supported by task sections. In addition, this section must have a names-factory key which refers to a names-factory section. In conjunction with the names-factory, a tasks-factory section creates zero or more task definitions that look like regular tasks, each with a name provided by the names-factory, and all using the task definition set in the tasks-factory.

A tasks-factory section is referenced by a subtasks-factory key in a “task” section. A sample task.config which defines a tasks-factory section might look like this:

[task "static task list"]
    subtasks-factory = static tasks factory
    ...

[tasks-factory "static tasks factory"]
    names-factory = static names factory list
    ...

Names-Factory

A names-factory section defines a collection of name keys which are used to generate the names for task definitions. The section should contain a “type” key that specifies the type.

A names-factory section is referenced by a names-factory key in a “tasks-factory” section. A sample task.config which defines a names-factory section might look like this:

[names-factory "static names factory list"]
    name = my a task
    name = my b task
    type = static

The following keys may be defined in any names-factory section:

changes

: This key defines a query that is used to fetch change numbers which will be used as the names of the task(s).

Example:

    changes = change:1 OR change:2

name

: This key defines the name of the tasks. This key may be used several times in order to define more than one task. The name key can only be used along with names-factory of type static.

Example:

    name = my a task
    name = 12345

type

: This key defines the type of the names-factory section. The type can be either static or change. For names-factory of type static, name key(s) should be defined where as names-factory of type change needs a change key to be defined.

Example:

    type = static
    type = change

External Entries

A name for external task files on other projects and branches may be given by defining an external section in a task file. This later allows this external name to then be referenced by other definitions. The following keys may be defined in an external section. External references are limited to files under the top level task directory.

file

: This key defines the name of the external task file under the task directory referenced.

Example:

    file = common.config  # references the file named task/common.config

user

: This key defines the username of the user's ref in the All-Users project of the external file referenced.

Example:

    user = first-user # references the sharded user ref refs/users/01/1000001

Properties

The task plugin supplies the following properties which may be used anywhere in a task, tasks-factory, or names-factory definition.

    ${_name}            represents the name of the current task
    ${_change_number}   represents the change number of the current change
    ${_change_id}       represents the change id of the current change
    ${_change_project}  represents the project of the current change
    ${_change_branch}   represents the branch of the current change
    ${_change_status}   represents the status of the current change
    ${_change_topic}    represents the topic of the current change

Examples:

    fail-hint = {$_name} needs to be fixed
    fail-hint = {$_change_number} with {$_change_status} needs to be fixed
    fail-hint = {$_change_id} on {$_change_project} and {$_change_branch} needs to be fixed
    changes = parentof:${_change_number} project:${_change_project} branch:${_change_branch}

Custom properties may be defined on a task using the following syntax:

    set-<property-name> = <property-value>

Subtasks inherit all custom properties from their parents, however subtasks may override inherrited properties and give them new values.

Example:

    [task "foo-project"]
        set-project-name = foo
        subtask = sub-project
        subtask = common-to-many-projects

    [task "sub-project"]
        set-project-name = sub-foo # Overrides value from 'foo-project'
        subtask = common-to-many-projects

    [task "common-to-many-projects"]
        fail-hint = ${project-name} needs to be fixed
        ...

It is possible to define a custom property value and to export that value to the json on the current task by using the following syntax:

    export-<property-name> = <property-value>

Example:

    [task "foo"]
        export-ci-system = jenkins
     "subTasks" : [
        {
           "exported" : {
              "ci-system" : "jenkins"
           },
           ...
           "name" : "foo",
           ...
        }
     ]

Change Query Output

It is possible to add a task section to the query output of changes using the task plugin switches. The following switches are available:

--@PLUGIN@--applicable

This switch is meant to be used to determine the state of applicable tasks for each change, it outputs applicable tasks for a change.

--@PLUGIN@--all

This switch is meant as a debug switch, it outputs all tasks visible to the calling user, whether they apply to a change or not. When this flag is used, an additional ‘applicable’ property is included in each task output to indicate whether the task actually met its applicability criteria or not.

--@PLUGIN@--preview

This switch is meant as a debug switch for previewing changes to task configs. This switch outputs tasks as if the supplied change were already merged. This makes it possible to preview the effect of proposed changes before going live with them. Multiple changes may be previewed together.

--@PLUGIN@--invalid

This switch is meant as a debug switch to help find mis-configured tasks, it causes only invalid tasks and the tasks in the tree hierarchy above them to be output. To verify task validity, this change runs all queries defined for a task, no matter what the tasks state is; this makes it possible to detect some additional configuration problems which may not be detected when running normally. If all tasks are properly configured, this switch should not output anything. This switch is particularly useful in combination with the --@PLUGIN@--preview switch.

--@PLUGIN@--task--evaluation-time

This switch is meant as a debug switch to evaluate task performance. This switch outputs an elapsed time value on every task indicating how much time it took to evaluate a task and its subtasks.

When tasks are appended to changes, they will have a “task” section under the plugins section like below:

  $ ssh -x -p 29418 example.com gerrit query change:123
  change I9fdfb1315610a8e3d5c48e4321193b7c265f30ae
  ...
  plugins:
    name: task
    roots:
      name: Jenkins Build and Test
      inProgress: false
      status: READY
      subTasks:
        name: code review
        status: PASS

Examples

See task_states for a comprehensive list of examples of task configs and their states.

See what the results will look when previewing a change to those states.