# Gerrit replica on Kubernetes

Gerrit is a web-based code review tool, which acts as a Git server. On large setups
Gerrit servers can see a sizable amount of traffic from git operations performed by
developers and build servers. The major part of requests are read-only requests
(e.g. by `git fetch` operations). To take some load of the Gerrit server,
Gerrit replicas can be deployed to serve read-only requests.

This helm chart provides a Gerrit replica setup that can be deployed on Kubernetes.
The Gerrit replica is capable of receiving replicated git repositories from a
Gerrit. The Gerrit replica can then serve authenticated read-only requests.

***note
Gerrit versions before 3.0 are no longer supported, since the support of ReviewDB
was removed.
***

## Prerequisites

- Helm (>= version 3.0)

    (Check out [this guide](https://docs.helm.sh/using_helm/#quickstart-guide)
    how to install and use helm.)

- Access to a provisioner for persistent volumes with `Read Write Many (RWM)`-
  capability.

    A list of applicaple volume types can be found
    [here](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#access-modes).
    This project was developed using the
    [NFS-server-provisioner helm chart](https://github.com/helm/charts/tree/master/stable/nfs-server-provisioner),
    a NFS-provisioner deployed in the Kubernetes cluster itself. Refer to
    [this guide](/helm-charts/gerrit-replica/docs/nfs-provisioner.md) of how to
    deploy it in context of this project.

- A domain name that is configured to point to the IP address of the node running
  the Ingress controller on the kubernetes cluster (as described
  [here](http://alesnosek.com/blog/2017/02/14/accessing-kubernetes-pods-from-outside-of-the-cluster/)).

- (Optional: Required, if SSL is configured)
  A [Java keystore](https://gerrit-review.googlesource.com/Documentation/config-gerrit.html#httpd.sslKeyStore)
  to be used by Gerrit.

## Installing the Chart

***note
**ATTENTION:** The value for `ingress.host` is required for rendering
the chart's templates. The nature of the value does not allow defaults.
Thus a custom `values.yaml`-file setting this value is required!
***

To install the chart with the release name `gerrit-replica`, execute:

```sh
cd $(git rev-parse --show-toplevel)/helm-charts
helm install \
  gerrit-replica \  # release name
  ./gerrit-replica \  # path to chart
  -f <path-to-custom-values>.yaml
```

The command deploys the Gerrit replica on the current Kubernetes cluster. The
[configuration section](#Configuration) lists the parameters that can be
configured during installation.

The Gerrit replica requires the replicated `All-Projects.git`- and `All-Users.git`-
repositories to be present in the `/var/gerrit/git`-directory. The `gerrit-init`-
InitContainer will wait for this being the case. A way to do this is to access
the Gerrit replica pod and to clone the repositories from the primary Gerrit (Make
sure that you have the correct access rights do so.):

```sh
kubectl exec -it <gerrit-replica-pod> -c gerrit-init ash
gerrit@<gerrit-replica-pod>:/var/tools$ cd /var/gerrit/git
gerrit@<gerrit-replica-pod>:/var/gerrit/git$ git clone "http://gerrit.com/All-Projects" --mirror
Cloning into bare repository 'All-Projects.git'...
gerrit@<gerrit-replica-pod>:/var/gerrit/git$ git clone "http://gerrit.com/All-Users" --mirror
Cloning into bare repository 'All-Users.git'...
```

## Configuration

The following sections list the configurable values in `values.yaml`. To configure
a Gerrit replica setup, make a copy of the `values.yaml`-file and change the
parameters as needed. The configuration can be applied by installing the chart as
described [above](#Installing-the-chart).

In addition, single options can be set without creating a custom `values.yaml`:

```sh
cd $(git rev-parse --show-toplevel)/helm-charts
helm install \
  gerrit-replica \  # release name
  ./gerrit-replica \  # path to chart
  --set=gitRepositoryStorage.size=100Gi,gitBackend.replicas=2
```

### Container images

| Parameter | Description | Default |
|-----------|-------------|---------|
| `images.busybox.registry` | The registry to pull the busybox container images from | `docker.io` |
| `images.busybox.tag` | The busybox image tag to use | `latest` |
| `images.registry.name` | The image registry to pull the container images from | `` |
| `images.registry.ImagePullSecret.name` | Name of the ImagePullSecret | `image-pull-secret` (if empty no image pull secret will be deployed) |
| `images.registry.ImagePullSecret.create` | Whether to create an ImagePullSecret | `false` |
| `images.registry.ImagePullSecret.username` | The image registry username | `nil` |
| `images.registry.ImagePullSecret.password` | The image registry password | `nil` |
| `images.version` | The image version (image tag) to use | `latest` |
| `images.imagePullPolicy` | Image pull policy | `Always` |
| `images.additionalImagePullSecrets` | Additional image pull policies that pods should use | `[]` |

### Labels

| Parameter | Description | Default |
|-----------|-------------|---------|
| `additionalLabels` | Additional labels for resources managed by this Helm chart | `{}` |

### Storage classes

For information of how a `StorageClass` is configured in Kubernetes, read the
[official Documentation](https://kubernetes.io/docs/concepts/storage/storage-classes/#introduction).

| Parameter | Description | Default |
|-----------|-------------|---------|
| `storageClasses.default.name` | The name of the default StorageClass (RWO) | `default` |
| `storageClasses.default.create` | Whether to create the StorageClass | `false` |
| `storageClasses.default.provisioner` | Provisioner of the StorageClass | `kubernetes.io/aws-ebs` |
| `storageClasses.default.reclaimPolicy` | Whether to `Retain` or `Delete` volumes, when they become unbound | `Delete` |
| `storageClasses.default.parameters` | Parameters for the provisioner | `parameters.type: gp2`, `parameters.fsType: ext4` |
| `storageClasses.default.mountOptions` | The mount options of the default StorageClass | `[]` |
| `storageClasses.default.allowVolumeExpansion` | Whether to allow volume expansion. | `false` |
| `storageClasses.shared.name` | The name of the shared StorageClass (RWM) | `shared-storage` |
| `storageClasses.shared.create` | Whether to create the StorageClass | `false` |
| `storageClasses.shared.provisioner` | Provisioner of the StorageClass | `nfs` |
| `storageClasses.shared.reclaimPolicy` | Whether to `Retain` or `Delete` volumes, when they become unbound | `Delete` |
| `storageClasses.shared.parameters` | Parameters for the provisioner | `parameters.mountOptions: vers=4.1` |
| `storageClasses.shared.mountOptions` | The mount options of the shared StorageClass | `[]` |
| `storageClasses.shared.allowVolumeExpansion` | Whether to allow volume expansion. | `false` |

### CA certificate

Some application may require TLS verification. If the default CA built into the
containers is not enough a custom CA certificate can be given to the deployment.
Note, that Gerrit will require its CA in a JKS keytore, which is described below.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `caCert` | CA certificate for TLS verification (if not set, the default will be used) | `None` |

### Workaround for NFS

Kubernetes will not always be able to adapt the ownership of the files within NFS
volumes. Thus, a workaround exists that will add init-containers to
adapt file ownership. Note, that only the ownership of the root directory of the
volume will be changed. All data contained within will be expected to already be
owned by the user used by Gerrit. Also the ID-domain will be configured to ensure
correct ID-mapping.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `nfsWorkaround.enabled` | Whether the volume used is an NFS-volume | `false` |
| `nfsWorkaround.chownOnStartup` | Whether to chown the volume on pod startup | `false` |
| `nfsWorkaround.idDomain` | The ID-domain that should be used to map user-/group-IDs for the NFS mount | `localdomain.com` |

### Network policies

| Parameter | Description | Default |
|-----------|-------------|---------|
| `networkPolicies.enabled` | Whether to enable preconfigured NetworkPolicies | `false` |
| `networkPolicies.dnsPorts` | List of ports used by DNS-service (e.g. KubeDNS) | `[53, 8053]` |

The NetworkPolicies provided here are quite strict and do not account for all
possible scenarios. Thus, custom NetworkPolicies have to be added, e.g. for
connecting to a database. On the other hand some defaults may be not restrictive
enough. By default, the ingress traffic of the git-backend pod is not restricted.
Thus, every source (with the right credentials) could push to the git-backend.
To add an additional layer of security, the ingress rule could be defined more
finegrained. The chart provides the possibility to define custom rules for ingress-
traffic of the git-backend pod under `gitBackend.networkPolicy.ingress`.
Depending on the scenario, there are different ways to restrict the incoming
connections.

If the replicator (e.g. Gerrit) is running in a pod on the same cluster,
a podSelector (and namespaceSelector, if the pod is running in a different
namespace) can be used to whitelist the traffic:

```yaml
gitBackend:
  networkPolicy:
    ingress:
    - from:
      - podSelector:
          matchLabels:
            app: gerrit
```

If the replicator is outside the cluster, the IP of the replicator can also be
whitelisted, e.g.:

```yaml
gitBackend:
  networkPolicy:
    ingress:
    - from:
      - ipBlock:
          cidr: xxx.xxx.0.0/16
```

The same principle also applies to other use cases, e.g. connecting to a database.
For more information about the NetworkPolicy resource refer to the
[Kubernetes documentation](https://kubernetes.io/docs/concepts/services-networking/network-policies/).

### Storage for Git repositories

| Parameter | Description | Default |
|-----------|-------------|---------|
| `gitRepositoryStorage.externalPVC.use` | Whether to use a PVC deployed outside the chart | `false` |
| `gitRepositoryStorage.externalPVC.name` | Name of the external PVC | `git-repositories-pvc` |
| `gitRepositoryStorage.size` | Size of the volume storing the Git repositories | `5Gi` |

If the git repositories should be persisted even if the chart is deleted and in
a way that the volume containing them can be mounted by the reinstalled chart,
the PVC claiming the volume has to be created independently of the chart. To use
the external PVC, set `gitRepositoryStorage.externalPVC.enabled` to `true` and
give the name of the PVC under `gitRepositoryStorage.externalPVC.name`.

### Storage for Logs

In addition to collecting logs with a log collection tool like Promtail, the logs
can also be stored in a persistent volume. This volume has to be a read-write-many
volume to be able to be used by multiple pods.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `logStorage.enabled` | Whether to enable persistence of logs | `false` |
| `logStorage.externalPVC.use` | Whether to use a PVC deployed outside the chart | `false` |
| `logStorage.externalPVC.name` | Name of the external PVC | `gerrit-logs-pvc` |
| `logStorage.size` | Size of the volume | `5Gi` |
| `logStorage.cleanup.enabled` | Whether to regularly delete old logs | `false` |
| `logStorage.cleanup.schedule` | Cron schedule defining when to run the cleanup job | `0 0 * * *` |
| `logStorage.cleanup.retentionDays` | Number of days to retain the logs | `14` |
| `logStorage.cleanup.resources` | Resources the container is allowed to use | `requests.cpu: 100m` |
| `logStorage.cleanup.additionalPodLabels` | Additional labels for pods | `{}` |
| | | `requests.memory: 256Mi` |
| | | `limits.cpu: 100m` |
| | | `limits.memory: 256Mi` |

Each pod will create a separate folder for its logs, allowing to trace logs to
the respective pods.

### Istio

Istio can be used as an alternative to Kubernetes Ingresses to manage the traffic
into the cluster and also inside the cluster. This requires istio to be installed
beforehand. Some guidance on how to set up istio can be found [here](/Documentation/istio.md).
The helm chart expects `istio-injection` to be enabled in the namespace, in which
it will be installed.

In the case istio is used, all configuration for ingresses in the chart will be
ignored.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `istio.enabled` | Whether istio should be used (requires istio to be installed) | `false` |
| `istio.host` | Hostname (CNAME must point to istio ingress gateway loadbalancer service) | `nil` |
| `istio.tls.enabled` | Whether to enable TLS | `false` |
| `istio.tls.secret.create` | Whether to create TLS certificate secret | `true` |
| `istio.tls.secret.name` | Name of external secret containing TLS certificates | `nil` |
| `istio.tls.cert` | TLS certificate | `-----BEGIN CERTIFICATE-----` |
| `istio.tls.key` | TLS key | `-----BEGIN RSA PRIVATE KEY-----` |
| `istio.ssh.enabled` | Whether to enable SSH | `false` |

### Ingress

As an alternative to istio the Nginx Ingress controller can be used to manage
ingress traffic.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `ingress.enabled` | Whether to deploy an Ingress | `false` |
| `ingress.host` | Host name to use for the Ingress (required for Ingress) | `nil` |
| `ingress.maxBodySize` | Maximum request body size allowed (Set to 0 for an unlimited request body size) | `50m` |
| `ingress.additionalAnnotations` | Additional annotations for the Ingress | `nil` |
| `ingress.tls.enabled` | Whether to enable TLS termination in the Ingress | `false` |
| `ingress.tls.secret.create` | Whether to create a TLS-secret | `true` |
| `ingress.tls.secret.name` | Name of an external secret that will be used as a TLS-secret | `nil` |
| `ingress.tls.cert` | Public SSL server certificate | `-----BEGIN CERTIFICATE-----` |
| `ingress.tls.key` | Private SSL server certificate | `-----BEGIN RSA PRIVATE KEY-----` |

***note
For graceful shutdown to work with an ingress, the ingress controller has to be
configured to gracefully close the connections as well.
***

### Promtail Sidecar

To collect Gerrit logs, a Promtail sidecar can be deployed into the Gerrit replica
pods. This can for example be used together with the [gerrit-monitoring](https://gerrit-review.googlesource.com/admin/repos/gerrit-monitoring)
project.

| Parameter | Description | Default |
|-----------|-------------|---------|
| `promtailSidecar.enabled` | Whether to install the Promatil sidecar container | `false` |
| `promtailSidecar.image` | The promtail container image to use | `grafana/promtail` |
| `promtailSidecar.version` | The promtail container image version | `1.3.0` |
| `promtailSidecar.resources` | Configure the amount of resources the container requests/is allowed | `requests.cpu: 100m` |
|                             |                                                                     | `requests.memory: 128Mi` |
|                             |                                                                     | `limits.cpu: 200m` |
|                             |                                                                     | `limits.memory: 128Mi` |
| `promtailSidecar.tls.skipverify` | Whether to skip TLS verification | `true` |
| `promtailSidecar.tls.caCert` | CA certificate for TLS verification | `-----BEGIN CERTIFICATE-----` |
| `promtailSidecar.loki.url` | URL to reach Loki | `loki.example.com` |
| `promtailSidecar.loki.user` | Loki user | `admin` |
| `promtailSidecar.loki.password` | Loki password | `secret` |


### Apache-Git-HTTP-Backend (Git-Backend)

| Parameter | Description | Default |
|-----------|-------------|---------|
| `gitBackend.image` | Image name of the Apache-git-http-backend container image | `k8sgerrit/apache-git-http-backend` |
| `gitBackend.additionalPodLabels` | Additional labels for Pods | `{}` |
| `gitBackend.tolerations` | Taints and tolerations work together to ensure that pods are not scheduled onto inappropriate nodes. For more information, please refer to the following documents. [Taints and Tolerations](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration) | [] |
| `gitBackend.topologySpreadConstraints` | Control how Pods are spread across your cluster among failure-domains. For more information, please refer to the following documents. [Pod Topology Spread Constraints](https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints) | {} |
| `gitBackend.nodeSelector` | Assigns a Pod to the specified Nodes. For more information, please refer to the following documents. [Assign Pods to Nodes](https://kubernetes.io/docs/tasks/configure-pod-container/assign-pods-nodes/). [Assigning Pods to Nodes](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/) | {} |
| `gitBackend.affinity` | Assigns a Pod to the specified Nodes | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].weight: 100 |
|                       |                                      | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.topologyKey: "topology.kubernetes.io/zone" |
|                       |                                      | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].key: app |
|                       |                                      | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].operator: In |
|                       |                                      | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].values[0]: git-backend |
| `gitBackend.replicas` | Number of pod replicas to deploy | `1` |
| `gitBackend.maxSurge` | Max. percentage or number of pods allowed to be scheduled above the desired number | `25%` |
| `gitBackend.maxUnavailable` | Max. percentage or number of pods allowed to be unavailable at a time | `100%` |
| `gitBackend.networkPolicy.ingress` | Custom ingress-network policy for git-backend pods | `[{}]` (allow all) |
| `gitBackend.networkPolicy.egress` | Custom egress-network policy for git-backend pods | `nil` |
| `gitBackend.resources` | Configure the amount of resources the pod requests/is allowed | `requests.cpu: 100m` |
|                        |                                                               | `requests.memory: 256Mi` |
|                        |                                                               | `limits.cpu: 100m` |
|                        |                                                               | `limits.memory: 256Mi` |
| `gitBackend.livenessProbe` | Configuration of the liveness probe timings | `{initialDelaySeconds: 10, periodSeconds: 5}` |
| `gitBackend.readinessProbe` | Configuration of the readiness probe timings | `{initialDelaySeconds: 5, periodSeconds: 1}` |
| `gitBackend.credentials.htpasswd` | `.htpasswd`-file containing username/password-credentials for accessing git | `git:$apr1$O/LbLKC7$Q60GWE7OcqSEMSfe/K8xU.` (user: git, password: secret) |
| `gitBackend.service.additionalAnnotations` | Additional annotations for the Service | `{}` |
| `gitBackend.service.loadBalancerSourceRanges` | The list of allowed IPs for the Service | `[]` |
| `gitBackend.service.type` | Which kind of Service to deploy | `LoadBalancer` |
| `gitBackend.service.externalTrafficPolicy` | Specify how traffic from external is handled | `Cluster` |
| `gitBackend.service.http.enabled` | Whether to serve HTTP-requests (needed for Ingress) | `true` |
| `gitBackend.service.http.port` | Port over which to expose HTTP | `80` |
| `gitBackend.service.https.enabled` | Whether to serve HTTPS-requests | `false` |
| `gitBackend.service.https.port` | Port over which to expose HTTPS | `443` |

***note
At least one endpoint (HTTP and/or HTTPS) has to be enabled in the service!
***

Project creation, project deletion and HEAD update can also replicated. To enable
this feature configure the replication plugin to use an adminUrl using the format
`gerrit+https://<apache-git-http-backend host>`.

### Git garbage collection

| Parameter | Description | Default |
|-----------|-------------|---------|
| `gitGC.image` | Image name of the Git-GC container image | `k8sgerrit/git-gc` |
| `gitGC.schedule` | Cron-formatted schedule with which to run Git garbage collection | `0 6,18 * * *` |
| `gitGC.resources` | Configure the amount of resources the pod requests/is allowed | `requests.cpu: 100m` |
|                   |                                                               | `requests.memory: 256Mi` |
|                   |                                                               | `limits.cpu: 100m` |
|                   |                                                               | `limits.memory: 256Mi` |
| `gitGC.tolerations` | Taints and tolerations work together to ensure that pods are not scheduled onto inappropriate nodes. For more information, please refer to the following documents. [Taints and Tolerations](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration) | [] |
| `gitGC.nodeSelector` | Assigns a Pod to the specified Nodes. For more information, please refer to the following documents. [Assign Pods to Nodes](https://kubernetes.io/docs/tasks/configure-pod-container/assign-pods-nodes/). [Assigning Pods to Nodes](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/) | {} |
| `gitGC.affinity` | Assigns a Pod to the specified Nodes. For more information, please refer to the following documents. [Assign Pods to Nodes using Node Affinity](https://kubernetes.io/docs/tasks/configure-pod-container/assign-pods-nodes-using-node-affinity/). [Assigning Pods to Nodes](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/) | {} |
| `gitGC.additionalPodLabels` | Additional labels for Pods | `{}` |

### Gerrit replica

***note
The way the Jetty servlet used by Gerrit works, the Gerrit replica component of the
gerrit-replica chart actually requires the URL to be known, when the chart is installed.
The suggested way to do that is to use the provided Ingress resource. This requires
that a URL is available and that the DNS is configured to point the URL to the
IP of the node the Ingress controller is running on!
***

***note
Setting the canonical web URL in the gerrit.config to the host used for the Ingress
is mandatory, if access to the Gerrit replica is required!
***

| Parameter | Description | Default |
|-----------|-------------|---------|
| `gerritReplica.images.gerritInit` | Image name of the Gerrit init container image | `k8sgerrit/gerrit-init` |
| `gerritReplica.images.gerritReplica` | Image name of the Gerrit replica container image | `k8sgerrit/gerrit` |
| `gerritReplica.tolerations` | Taints and tolerations work together to ensure that pods are not scheduled onto inappropriate nodes. For more information, please refer to the following documents. [Taints and Tolerations](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration) | [] |
| `gerritReplica.topologySpreadConstraints` | Control how Pods are spread across your cluster among failure-domains. For more information, please refer to the following documents. [Pod Topology Spread Constraints](https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints) | {} |
| `gerritReplica.nodeSelector` | Assigns a Pod to the specified Nodes. For more information, please refer to the following documents. [Assign Pods to Nodes](https://kubernetes.io/docs/tasks/configure-pod-container/assign-pods-nodes/). [Assigning Pods to Nodes](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/) | {} |
| `gerritReplica.affinity` | Assigns a Pod to the specified Nodes. By default, gerrit-replica is evenly distributed on `topology.kubernetes.io/zone`. For more information, please refer to the following documents. [Assign Pods to Nodes using Node Affinity](https://kubernetes.io/docs/tasks/configure-pod-container/assign-pods-nodes-using-node-affinity/). [Assigning Pods to Nodes](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/) | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].weight: 100 |
| | | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.topologyKey: "topology.kubernetes.io/zone" |
| | | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].key: app |
| | | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].operator: In |
| | | podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[0].podAffinityTerm.labelSelector.matchExpressions[0].values[0]: gerrit-replica |
| `gerritReplica.replicas` | Number of pod replicas to deploy | `1` |
| `gerritReplica.additionalAnnotations` | Additional annotations for the Pods | {} |
| `gerritReplica.additionalPodLabels` | Additional labels for the Pods | `{}` |
| `gerritReplica.maxSurge` | Max. percentage or number of pods allowed to be scheduled above the desired number | `25%` |
| `gerritReplica.maxUnavailable` | Max. percentage or number of pods allowed to be unavailable at a time | `100%` |
| `gerritReplica.livenessProbe` | Configuration of the liveness probe timings | `{initialDelaySeconds: 60, periodSeconds: 5}` |
| `gerritReplica.readinessProbe` | Configuration of the readiness probe timings | `{initialDelaySeconds: 10, periodSeconds: 10}` |
| `gerritReplica.startupProbe` | Configuration of the startup probe timings | `{initialDelaySeconds: 10, periodSeconds: 5}` |
| `gerritReplica.gracefulStopTimeout` | Time in seconds Kubernetes will wait until killing the pod during termination (has to be longer then Gerrit's httpd.gracefulStopTimeout to allow graceful shutdown of Gerrit) | `90` |
| `gerritReplica.resources` | Configure the amount of resources the pod requests/is allowed | `requests.cpu: 1` |
|                           |                                                               | `requests.memory: 5Gi` |
|                           |                                                               | `limits.cpu: 1` |
|                           |                                                               | `limits.memory: 6Gi` |
| `gerritReplica.networkPolicy.ingress` | Custom ingress-network policy for gerrit-replica pods | `nil` |
| `gerritReplica.networkPolicy.egress` | Custom egress-network policy for gerrit-replica pods | `nil` |
| `gerritReplica.service.additionalAnnotations` | Additional annotations for the Service | `{}` |
| `gerritReplica.service.loadBalancerSourceRanges` | The list of allowed IPs for the Service | `[]` |
| `gerritReplica.service.type` | Which kind of Service to deploy | `NodePort` |
| `gerritReplica.service.externalTrafficPolicy` | Specify how traffic from external is handled | `Cluster` |
| `gerritReplica.service.http.port` | Port over which to expose HTTP | `80` |
| `gerritReplica.service.ssh.enabled` | Whether to enable SSH for the Gerrit replica | `false` |
| `gerritReplica.service.ssh.port` | Port for SSH | `29418` |
| `gerritReplica.keystore` | base64-encoded Java keystore (`cat keystore.jks \| base64`) to be used by Gerrit, when using SSL | `nil` |
| `gerritReplica.pluginManagement.plugins` | List of Gerrit plugins to install | `[]` |
| `gerritReplica.pluginManagement.plugins[0].name` | Name of plugin | `nil` |
| `gerritReplica.pluginManagement.plugins[0].url` | Download url of plugin. If given the plugin will be downloaded, otherwise it will be installed from the gerrit.war-file. | `nil` |
| `gerritReplica.pluginManagement.plugins[0].sha1` | SHA1 sum of plugin jar used to ensure file integrity and version (optional) | `nil` |
| `gerritReplica.pluginManagement.plugins[0].installAsLibrary` | Whether the plugin should be symlinked to the lib-dir in the Gerrit site. | `nil` |
| `gerritReplica.pluginManagement.libs` | List of Gerrit library modules to install | `[]` |
| `gerritReplica.pluginManagement.libs[0].name` | Name of the lib module | `nil` |
| `gerritReplica.pluginManagement.libs[0].url` | Download url of lib module. | `nil` |
| `gerritReplica.pluginManagement.libs[0].sha1` | SHA1 sum of plugin jar used to ensure file integrity and version | `nil` |
| `gerritReplica.pluginManagement.cache.enabled` | Whether to cache downloaded plugins | `false` |
| `gerritReplica.pluginManagement.cache.size` | Size of the volume used to store cached plugins | `1Gi` |
| `gerritReplica.priorityClassName` | Name of the PriorityClass to apply to replica pods | `nil` |
| `gerritReplica.etc.config` | Map of config files (e.g. `gerrit.config`) that will be mounted to `$GERRIT_SITE/etc`by a ConfigMap | `{gerrit.config: ..., replication.config: ...}`[see here](#Gerrit-config-files) |
| `gerritReplica.etc.secret` | Map of config files (e.g. `secure.config`) that will be mounted to `$GERRIT_SITE/etc`by a Secret | `{secure.config: ...}` [see here](#Gerrit-config-files) |
| `gerritReplica.additionalConfigMaps` | Allows to mount additional ConfigMaps into a subdirectory of `$SITE/data` | `[]` |
| `gerritReplica.additionalConfigMaps[*].name` | Name of the ConfigMap | `nil` |
| `gerritReplica.additionalConfigMaps[*].subDir` | Subdirectory under `$SITE/data` into which the files should be symlinked | `nil` |
| `gerritReplica.additionalConfigMaps[*].data` | Data of the ConfigMap. If not set, ConfigMap has to be created manually | `nil` |

### Gerrit config files

The gerrit-replica chart provides a ConfigMap containing the configuration files
used by Gerrit, e.g. `gerrit.config` and a Secret containing sensitive configuration
like the `secure.config` to configure the Gerrit installation in the Gerrit
component. The content of the config files can be set in the `values.yaml` under
the keys `gerritReplica.etc.config` and `gerritReplica.etc.secret` respectively.
The key has to be the filename (eg. `gerrit.config`) and the file's contents
the value. This way an arbitrary number of configuration files can be loaded into
the `$GERRIT_SITE/etc`-directory, e.g. for plugins.
All configuration options for Gerrit are described in detail in the
[official documentation of Gerrit](https://gerrit-review.googlesource.com/Documentation/config-gerrit.html).
Some options however have to be set in a specified way for Gerrit to work as
intended with the chart:

- `gerrit.basePath`

    Path to the directory containing the repositories. The chart mounts this
    directory from a persistent volume to `/var/gerrit/git` in the container. For
    Gerrit to find the correct directory, this has to be set to `git`.

- `gerrit.serverId`

    In Gerrit-version higher than 2.14 Gerrit needs a server ID, which is used by
    NoteDB. Gerrit would usually generate a random ID on startup, but since the
    gerrit.config file is read only, when mounted as a ConfigMap this fails.
    Thus the server ID has to be set manually!

- `gerrit.canonicalWebUrl`

    The canonical web URL has to be set to the Ingress host.

- `httpd.listenURL`

    This has to be set to `proxy-http://*:8080/` or `proxy-https://*:8080`,
    depending of TLS is enabled in the Ingress or not, otherwise the Jetty
    servlet will run into an endless redirect loop.

- `httpd.gracefulStopTimeout` / `sshd.gracefulStopTimeout`

    To enable graceful shutdown of the embedded jetty server and SSHD, a timeout
    has to be set with this option. This will be the maximum time, Gerrit will wait
    for HTTP requests to finish before shutdown.

- `container.user`

    The technical user in the Gerrit replica container is called `gerrit`. Thus, this
    value is required to be `gerrit`.

- `container.replica`

    Since this chart is meant to install a Gerrit replica, this naturally has to be
    `true`.

- `container.javaHome`

    This has to be set to `/usr/lib/jvm/java-11-openjdk-amd64`, since this is
    the path of the Java installation in the container.

- `container.javaOptions`

    The maximum heap size has to be set. And its value has to be lower than the
    memory resource limit set for the container (e.g. `-Xmx4g`). In your calculation
    allow memory for other components running in the container.

To enable liveness- and readiness probes, the healthcheck plugin will be installed
by default. Note, that by configuring to use a packaged or downloaded version of
the healthcheck plugin, the configured version will take precedence over the default
version. The plugin is by default configured to disable the `querychanges` and
`auth` healthchecks, since the Gerrit replica does not index changes and a new
Gerrit server will not yet necessarily have an user to validate authentication.

The default configuration can be overwritten by adding the `healthcheck.config`
file as a key-value pair to `gerritReplica.etc.config` as for every other configuration.

SSH keys should be configured via the helm-chart using the `gerritReplica.etc.secret`
map. Gerrit will create its own keys, if none are present in the site, but if
multiple Gerrit pods are running, each Gerrit instance would have its own keys.
Users accessing Gerrit via a load balancer would get issues due to changing
host keys.

## Upgrading the Chart

To upgrade an existing installation of the gerrit-replica chart, e.g. to install
a newer chart version or to use an updated custom `values.yaml`-file, execute
the following command:

```sh
cd $(git rev-parse --show-toplevel)/helm-charts
helm upgrade \
  <release-name> \
  ./gerrit-replica \ # path to chart
  -f <path-to-custom-values>.yaml \
```

## Uninstalling the Chart

To delete the chart from the cluster, use:

```sh
helm delete <release-name>
```