tree: 53f5c849b6518f2c9423e3f771c0a4530af19ad9 [path history] [tgz]
  1. .helmignore
  2. Chart.yaml
  3. LICENSE
  4. README.md
  5. docs/
  6. supplements/
  7. templates/
  8. values.yaml
helm-charts/gerrit-master/README.md

Gerrit on Kubernetes

Gerrit is a web-based code review tool, which acts as a Git server. This helm chart provides a Gerrit setup that can be deployed on Kubernetes. In addition, the chart provides a CronJob to perform Git garbage collection.

Gerrit versions before 3.0 are no longer supported, since the support of ReviewDB was removed.

Prerequisites

  • Helm and Tiller (of course)

    (Check out this guide how to install and use helm.)

  • Access to a provisioner for persistent volumes with Read Write Many (RWM)- capability.

    A list of applicaple volume types can be found here. This project was developed using the NFS-server-provisioner helm chart, a NFS-provisioner deployed in the Kubernetes cluster itself. Refer to this guide of how to deploy it in context of this project.

  • A domain name that is configured to point to the IP address of the node running the Ingress controller on the kubernetes cluster (as described here).

  • (Optional: Required, if SSL is configured) A Java keystore to be used by Gerrit.

Installing the Chart

ATTENTION: The value for gerritMaster.ingress.host is required for rendering the chart's templates. The nature of the value does not allow defaults. Thus a custom values.yaml-file setting this value is required!

To install the chart with the release name gerrit-master, execute:

cd $(git rev-parse --show-toplevel)/helm-charts
helm install ./gerrit-master \
  -n gerrit-master \
  -f <path-to-custom-values>.yaml

The command deploys the Gerrit instance on the current Kubernetes cluster. The configuration section lists the parameters that can be configured during installation.

Configuration

The following sections list the configurable values in values.yaml. To configure a Gerrit setup, make a copy of the values.yaml-file and change the parameters as needed. The configuration can be applied by installing the chart as described above.

In addition, single options can be set without creating a custom values.yaml:

cd $(git rev-parse --show-toplevel)/helm-charts
helm install ./gerrit-master \
  -n gerrit-master \
  --set=gitRepositoryStorage.size=100Gi

Container images

ParameterDescriptionDefault
images.registry.nameThe image registry to pull the container images from``
images.registry.ImagePullSecret.nameName of the ImagePullSecretimage-pull-secret (if empty no image pull secret will be deployed)
images.registry.ImagePullSecret.createWhether to create an ImagePullSecretfalse
images.registry.ImagePullSecret.usernameThe image registry usernamenil
images.registry.ImagePullSecret.passwordThe image registry passwordnil
images.versionThe image version (image tag) to uselatest
images.imagePullPolicyImage pull policyAlways

Storage classes

For information of how a StorageClass is configured in Kubernetes, read the official Documentation.

ParameterDescriptionDefault
storageClasses.default.nameThe name of the default StorageClass (RWO)default
storageClasses.default.createWhether to create the StorageClassfalse
storageClasses.default.provisionerProvisioner of the StorageClasskubernetes.io/aws-ebs
storageClasses.default.reclaimPolicyWhether to Retain or Delete volumes, when they become unboundDelete
storageClasses.default.parametersParameters for the provisionerparameters.type: gp2, parameters.fsType: ext4
storageClasses.shared.nameThe name of the shared StorageClass (RWM)shared-storage
storageClasses.shared.createWhether to create the StorageClassfalse
storageClasses.shared.provisionerProvisioner of the StorageClassnfs
storageClasses.shared.reclaimPolicyWhether to Retain or Delete volumes, when they become unboundDelete
storageClasses.shared.parametersParameters for the provisionerparameters.mountOptions: vers=4.1

Storage for Git repositories

ParameterDescriptionDefault
gitRepositoryStorage.externalPVC.useWhether to use a PVC deployed outside the chartfalse
gitRepositoryStorage.externalPVC.nameName of the external PVCgit-filesystem-pvc
gitRepositoryStorage.sizeSize of the volume storing the Git repositories5Gi

If the git repositories should be persisted even if the chart is deleted and in a way that the volume containing them can be mounted by the reinstalled chart, the PVC claiming the volume has to be created independently of the chart. To use the external PVC, set gitRepositoryStorage.externalPVC.enabled to true and give the name of the PVC under gitRepositoryStorage.externalPVC.name.

Git garbage collection

ParameterDescriptionDefault
gitGC.imageImage name of the Git-GC container imagek8s-gerrit/git-gc
gitGC.scheduleCron-formatted schedule with which to run Git garbage collection0 6,18 * * *
gitGC.resourcesConfigure the amount of resources the pod requests/is allowedrequests.cpu: 100m
requests.memory: 256Mi
limits.cpu: 100m
limits.memory: 256Mi
gitGC.logging.persistence.enabledWhether to persist logstrue
gitGC.logging.persistence.sizeStorage size for persisted logs1Gi

Gerrit

The way the Jetty servlet used by Gerrit works, the Gerrit component of the gerrit-master chart actually requires the URL to be known, when the chart is installed. The suggested way to do that is to use the provided Ingress resource. This requires that a URL is available and that the DNS is configured to point the URL to the IP of the node the Ingress controller is running on!
Setting the canonical web URL in the gerrit.config to the host used for the Ingress is mandatory, if access to Gerrit is required!
ParameterDescriptionDefault
gerritMaster.images.gerritInitImage name of the Gerrit init container imagek8s-gerrit/gerrit-init
gerritMaster.images.gerritMasterImage name of the Gerrit master container imagek8s-gerrit/gerrit-master
gerritMaster.replicasNumber of replica pods to deploy1
gerritMaster.maxSurgeMax. percentage or number of pods allowed to be scheduled above the desired number25%
gerritMaster.maxUnavailableMax. percentage or number of pods allowed to be unavailable at a time100%
gerritMaster.resourcesConfigure the amount of resources the pod requests/is allowedrequests.cpu: 1
requests.memory: 5Gi
limits.cpu: 1
limits.memory: 6Gi
gerritMaster.persistence.enabledWhether to persist the Gerrit sitetrue
gerritMaster.persistence.sizeStorage size for persisted Gerrit site10Gi
gerritMaster.service.typeWhich kind of Service to deployNodePort
gerritMaster.service.http.portPort over which to expose HTTP80
gerritMaster.ingress.hostREQUIRED: Host name to use for the Ingress (required for Ingress)nil
gerritMaster.ingress.additionalAnnotationsAdditional annotations for the Ingressnil
gerritMaster.ingress.tls.enabledWhether to enable TLS termination in the Ingressfalse
gerritMaster.ingress.tls.certPublic SSL server certificate-----BEGIN CERTIFICATE-----
gerritMaster.ingress.tls.keyPrivate SSL server certificate-----BEGIN RSA PRIVATE KEY-----
gerritMaster.keystorebase64-encoded Java keystore (`cat keystore.jksbase64`) to be used by Gerrit, when using SSL
gerritMaster.config.gerritThe contents of the gerrit.configsee here
gerritMaster.config.secureThe contents of the secure.configsee here
gerritMaster.config.replicationThe contents of the replication.configsee here

Gerrit config files

The gerrit-master chart provides a ConfigMap containing the gerrit.config as well as replication.config and a Secret containing the secure.config to configure the Gerrit installation in the Gerrit component. The content of the config files can be set in the values.yaml under the keys gerritMaster.config.gerrit, gerritMaster.config.replication and gerritMaster.config.secure respectively. All configuration options are described in detail in the official documentation of Gerrit. Some options however have to be set in a specified way for Gerrit to work as intended with the chart:

  • gerrit.basePath

    Path to the directory containing the repositories. The chart mounts this directory from a persistent volume to /var/gerrit/git in the container. For Gerrit to find the correct directory, this has to be set to git.

  • gerrit.serverId

    In Gerrit-version higher than 2.14 Gerrit needs a server ID, which is used by NoteDB. Gerrit would usually generate a random ID on startup, but since the gerrit.config file is read only, when mounted as a ConfigMap this fails. Thus the server ID has to be set manually!

  • gerrit.canonicalWebUrl

    The canonical web URL has to be set to the Ingress host.

  • httpd.listenURL

    This has to be set to proxy-http://*:8080/ or proxy-https://*:8080, depending of TLS is enabled in the Ingress or not, otherwise the Jetty servlet will run into an endless redirect loop.

  • container.user

    The technical user in the Gerrit container is called gerrit. Thus, this value is required to be gerrit.

  • container.javaHome

    This has to be set to /usr/lib/jvm/java-8-openjdk-amd64, since this is the path of the Java installation in the container.

  • container.javaOptions

    The maximum heap size has to be set. And its value has to be lower than the memory resource limit set for the container (e.g. -Xmx4g). In your calculation, allow memory for other components running in the container.

Upgrading the Chart

To upgrade an existing installation of the gerrit-master chart, e.g. to install a newer chart version or to use an updated custom values.yaml-file, execute the following command:

cd $(git rev-parse --show-toplevel)/helm-charts
helm upgrade <release-name> \
  -f <path-to-custom-values>.yaml \
  ./gerrit-master

Uninstalling the Chart

To delete the chart from the cluster, use:

helm delete <release-name> \
  --purge