= Gerrit Code Review - Configuration

== File `etc/gerrit.config`

The optional file `'$site_path'/etc/gerrit.config` is a Git-style
config file that controls many host specific settings for Gerrit.

[NOTE]
The contents of the `etc/gerrit.config` file are cached at startup
by Gerrit.  If you modify any properties in this file, Gerrit needs
to be restarted before it will use the new values.

Sample `etc/gerrit.config`:
----
[core]
  packedGitLimit = 200 m

[cache]
  directory = /var/cache/gerrit2
----

[[accounts]]
=== Section accounts

[[accounts.visibility]]accounts.visibility::
+
Controls visibility of other users' dashboard pages and
completion suggestions to web users.
+
If `ALL`, all users are visible to all other users, even
anonymous users.
+
If `SAME_GROUP`, only users who are also members of a group the
current user is a member of are visible.
+
If `VISIBLE_GROUP`, only users who are members of at least one group
that is visible to the current user are visible.
+
If `NONE`, no users other than the current user are visible.
+
Default is `ALL`.

[[addreviewer]]
=== Section addreviewer

[[addreviewer.maxWithoutConfirmation]]addreviewer.maxWithoutConfirmation::
+
The maximum number of reviewers a user can add at once by adding a
group as reviewer without being asked to confirm the operation.
+
If set to 0, the user will never be asked to confirm adding a group
as reviewer.
+
Default is 10.
+
This setting only applies for adding reviewers in the Gerrit Web UI,
but is ignored when adding reviewers with the
link:cmd-set-reviewers.html[set-reviewers] command.

[[addreviewer.maxAllowed]]addreviewer.maxAllowed::
+
The maximum number of reviewers a user can add at once by adding a
group as reviewer.
+
If set to 0, there is no limit for the number of reviewers that can
be added at once by adding a group as reviewer.
+
Default is 20.

[[addReviewer.baseWeight]]addReviewer.baseWeight::
+
The weight that will be applied in the default reviewer ranking algorithm.
This can be increased or decreased to give more or less influence to plugins.
If set to zero, the base ranking will not have any effect. Reviewers will then
be ordered as ranked by the plugins (if there are any).
+
By default 1.

[[auth]]
=== Section auth

See also link:config-sso.html[SSO configuration].

[[auth.type]]auth.type::
+
Type of user authentication employed by Gerrit.  The supported
values are:
+
* `OpenID`
+
The default setting.  Gerrit uses any valid OpenID
provider chosen by the end-user.  For more information see
http://openid.net/[openid.net].
+
* `OpenID_SSO`
+
Supports OpenID from a single provider.  There is no registration
link, and the "Sign In" link sends the user directly to the provider's
SSO entry point.
+
* `HTTP`
+
Gerrit relies upon data presented in the HTTP request.  This includes
HTTP basic authentication, or some types of commercial single-sign-on
solutions.  With this setting enabled the authentication must
take place in the web server or servlet container, and not from
within Gerrit.
+
* `HTTP_LDAP`
+
Exactly like `HTTP` (above), but additionally Gerrit pre-populates
a user's full name and email address based on information obtained
from the user's account object in LDAP.  The user's group membership
is also pulled from LDAP, making any LDAP groups that a user is a
member of available as groups in Gerrit.
+
* `CLIENT_SSL_CERT_LDAP`
+
This authentication type is actually kind of SSO. Gerrit will configure
Jetty's SSL channel to request the client's SSL certificate. For this
authentication to work a Gerrit administrator has to import the root
certificate of the trust chain used to issue the client's certificate
into the <review-site>/etc/keystore.
After the authentication is done Gerrit will obtain basic user
registration (name and email) from LDAP, and some group memberships.
Therefore, the "_LDAP" suffix in the name of this authentication type.
This authentication type can only be used under hosted daemon mode, and
the httpd.listenUrl must use https:// as the protocol.
Optionally, certificate revocation list file can be used
at <review-site>/etc/crl.pem. For details, see httpd.sslCrl.
+
* `LDAP`
+
Gerrit prompts the user to enter a username and a password, which
it then verifies by performing a simple bind against the configured
<<ldap.server,ldap.server>>.  In this configuration the web server
is not involved in the user authentication process.
+
The actual username used in the LDAP simple bind request is the
account's full DN, which is discovered by first querying the
directory using either an anonymous request, or the configured
<<ldap.username,ldap.username>> identity. Gerrit can also use kerberos if
<<ldap.authentication,ldap.authentication>> is set to `GSSAPI`.
+
If link:#auth.gitBasicAuthPolicy[`auth.gitBasicAuthPolicy`] is set to `HTTP`,
the randomly generated HTTP password is used for authentication. On the other hand,
if link:#auth.gitBasicAuthPolicy[`auth.gitBasicAuthPolicy`] is set to `HTTP_LDAP`,
the password in the request is first checked against the HTTP password and, if
it does not match, it is then validated against the LDAP password.
Service users that only exist in the Gerrit database are authenticated by their
HTTP passwords.

* `LDAP_BIND`
+
Gerrit prompts the user to enter a username and a password, which
it then verifies by performing a simple bind against the configured
<<ldap.server,ldap.server>>.  In this configuration the web server
is not involved in the user authentication process.
+
Unlike `LDAP` above, the username used to perform the LDAP simple bind
request is the exact string supplied in the dialog by the user.
The configured <<ldap.username,ldap.username>> identity is not used to obtain
account information.
+
* `OAUTH`
+
OAuth is a protocol that lets external apps request authorization to private
details in a user's account without getting their password. This is
preferred over Basic Authentication because tokens can be limited to specific
types of data, and can be revoked by users at any time.
+
Site owners have to register their application before getting started. Note
that provider specific plugins must be used with this authentication scheme.
+
Git clients may send OAuth 2 access tokens instead of passwords in the Basic
authentication header. Note that provider specific plugins must be installed to
facilitate this authentication scheme. If multiple OAuth 2 provider plugins are
installed one of them must be selected as default with the
`auth.gitOAuthProvider` option.
+
* `DEVELOPMENT_BECOME_ANY_ACCOUNT`
+
*DO NOT USE*.  Only for use in a development environment.
+
When this is the configured authentication method a hyperlink titled
`Become` appears in the top right corner of the page, taking the
user to a form where they can enter the username of any existing
user account, and immediately login as that account, without any
authentication taking place.  This form of authentication is only
useful for the GWT hosted mode shell, where OpenID authentication
redirects might be risky to the developer's host computer, and HTTP
authentication is not possible.

+
By default, OpenID.

[[auth.allowedOpenID]]auth.allowedOpenID::
+
List of permitted OpenID providers.  A user may only authenticate
with an OpenID that matches this list.  Only used if `auth.type`
is set to `OpenID` (the default).
+
Patterns may be either a
link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard
Java regular expression (java.util.regex)] (start with `^` and
end with `$`) or be a simple prefix (any other string).
+
By default, the list contains two values, `http://` and `https://`,
allowing users to authenticate with any OpenID provider.

[[auth.trustedOpenID]]auth.trustedOpenID::
+
List of trusted OpenID providers.  Only used if `auth.type` is
set to `OpenID` (the default).
+
In order for a user to take advantage of permissions beyond those
granted to the `Anonymous Users` and `Registered Users` groups,
the user account must only have OpenIDs which match at least one
pattern from this list.
+
Patterns may be either a
link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard
Java regular expression (java.util.regex)] (start with `^` and
end with `$`) or be a simple prefix (any other string).
+
By default, the list contains two values, `http://` and `https://`,
allowing Gerrit to trust any OpenID it receives.

[[auth.openIdDomain]]auth.openIdDomain::
+
List of allowed OpenID email address domains. Only used if
`auth.type` is set to `OPENID` or `OPENID_SSO`.
+
Domain is case insensitive and must be in the same form as it
appears in the email address, for example, "example.com".
+
By default, any domain is accepted.

[[auth.maxOpenIdSessionAge]]auth.maxOpenIdSessionAge::
+
Time in seconds before an OpenID provider must force the user
to authenticate themselves again before authentication to this
Gerrit server.  Currently this is only a polite request, and users
coming from providers that don't support the PAPE extension will
be accepted anyway.  In the future it may be enforced, rejecting
users coming from providers that don't honor the max session age.
+
If set to 0, the provider will always force the user to authenticate
(e.g. supply their password).  Values should use common unit suffixes
to express their setting:
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days
* w, week, weeks (`1 week` is treated as `7 days`)
* mon, month, months (`1 month` is treated as `30 days`)
* y, year, years (`1 year` is treated as `365 days`)

+
Default is -1, permitting infinite time between authentications.

[[auth.registerEmailPrivateKey]]auth.registerEmailPrivateKey::
+
Private key to use when generating an email verification token.
+
If not set, a random key is generated when running the
link:pgm-init.html[site initialization].

[[auth.maxRegisterEmailTokenAge]]auth.maxRegisterEmailTokenAge::
+
Time in seconds before an email verification token sent to a user in
order to validate their email address expires.
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days
* w, week, weeks (`1 week` is treated as `7 days`)
* mon, month, months (`1 month` is treated as `30 days`)
* y, year, years (`1 year` is treated as `365 days`)

+
Default is 12 hours.

[[auth.openIdSsoUrl]]auth.openIdSsoUrl::
+
The SSO entry point URL.  Only used if `auth.type` is set to
`OpenID_SSO`.
+
The "Sign In" link will send users directly to this URL.

[[auth.httpHeader]]auth.httpHeader::
+
HTTP header to trust the username from, or unset to select HTTP basic
authentication.  Only used if `auth.type` is set to `HTTP`.

[[auth.httpDisplaynameHeader]]auth.httpDisplaynameHeader::
+
HTTP header to retrieve the user's display name from.  Only used if `auth.type`
is set to `HTTP`.
+
If set, Gerrit trusts and enforces the user's full name using the HTTP header
and disables the ability to manually modify the user's full name
from the contact information page.

[[auth.httpEmailHeader]]auth.httpEmailHeader::
+
HTTP header to retrieve the user's e-mail from.  Only used if `auth.type`
is set to `HTTP`.
+
If set, Gerrit trusts and enforces the user's e-mail using the HTTP header
and disables the ability to manually modify or register other e-mails
from the contact information page.

[[auth.httpExternalIdHeader]]auth.httpExternalIdHeader::
+
HTTP header to retrieve the user's external identification token.
Only used if `auth.type` is set to `HTTP`.
+
If set, Gerrit adds the value contained in the HTTP header to the
user's identity. Typical use is with a federated identity token from
an external system (e.g. GitHub OAuth 2.0 authentication) where
the user's auth token exchanged during authentication handshake
needs to be used for authenticated communication to the external
system later on.
+
Example: `auth.httpExternalIdHeader: X-GitHub-OTP`

[[auth.loginUrl]]auth.loginUrl::
+
URL to redirect a browser to after the end-user has clicked on the
login link in the upper right corner. Only used if `auth.type` is set
to `HTTP` or `HTTP_LDAP`.
Organizations using an enterprise single-sign-on solution may want to
redirect the browser to the SSO product's sign-in page for completing the
login process and validate their credentials.
+
If set, Gerrit allows anonymous access until the end-user performs the login
and provides a trusted identity through the HTTP header.
If not set, Gerrit requires the HTTP header with a trusted identity
and returns the error page 'LoginRedirect.html' if such a header is not
present.

[[auth.loginText]]auth.loginText::
+
Text displayed in the loginUrl link. Only used if `auth.loginUrl` is set.
+
If not set, the "Sign In" text is used.

[[auth.registerPageUrl]]auth.registerPageUrl::
+
URL of the registration page to use when a new user logs in to Gerrit for
the first time. Used only when `auth.type` is set to `HTTP`.
+
If not set, the standard Gerrit registration page `/#/register/` is displayed.

[[auth.logoutUrl]]auth.logoutUrl::
+
URL to redirect a browser to after the end-user has clicked on the
"Sign Out" link in the upper right corner.  Organizations using an
enterprise single-sign-on solution may want to redirect the browser
to the SSO product's sign-out page.
+
If not set, the redirect returns to the list of all open changes.

[[auth.registerUrl]]auth.registerUrl::
+
Target for the "Register" link in the upper right corner.  Used only
when `auth.type` is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`.
+
If not set, no "Register" link is displayed.

[[auth.registerText]]auth.registerText::
+
Text for the "Register" link in the upper right corner.  Used only
when `auth.type` is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`.
+
If not set, defaults to "Register".

[[auth.editFullNameUrl]]auth.editFullNameUrl::
+
Target for the "Edit" button when the user is allowed to edit their
full name.  Used only when `auth.type` is `LDAP`, `LDAP_BIND` or
`CUSTOM_EXTENSION`.

[[auth.httpPasswordUrl]]auth.httpPasswordUrl::
+
Target for the "Obtain Password" link.  Used only when `auth.type` is
`CUSTOM_EXTENSION`.

[[auth.switchAccountUrl]]auth.switchAccountUrl::
+
URL to switch user identities and login as a different account than
the currently active account.  This is disabled by default except when
`auth.type` is `OPENID` and `DEVELOPMENT_BECOME_ANY_ACCOUNT`.  If set
the "Switch Account" link is displayed next to "Sign Out".
+
When `auth.type` does not normally enable this URL administrators may
set this to `login/` or `$canonicalWebUrl/login`, allowing users to
begin a new web session.

[[auth.cookiePath]]auth.cookiePath::
+
Sets "path" attribute of the authentication cookie.
+
If not set, HTTP request's path is used.

[[auth.cookieDomain]]auth.cookieDomain::
+
Sets "domain" attribute of the authentication cookie.
+
If not set, HTTP request's domain is used.

[[auth.cookieSecure]]auth.cookieSecure::
+
Sets "secure" flag of the authentication cookie.  If true, cookies
will be transmitted only over HTTPS protocol.
+
By default, false.

[[auth.emailFormat]]auth.emailFormat::
+
Optional format string to construct user email addresses out of
user login names.  Only used if `auth.type` is `HTTP`, `HTTP_LDAP`
or `LDAP`.
+
This value can be set to a format string, where `{0}` is replaced
with the login name.  E.g. "\{0\}+gerrit@example.com" with a user
login name of "foo" will produce "foo+gerrit@example.com" during
the first time user "foo" registers.
+
If the site is using `HTTP_LDAP` or `LDAP`, using this option is
discouraged.  Setting `ldap.accountEmailAddress` and importing the
email address from the LDAP directory is generally preferred.

[[auth.contributorAgreements]]auth.contributorAgreements::
+
Controls whether or not the contributor agreement features are
enabled for the Gerrit site.  If enabled a user must complete a
contributor agreement before they can upload changes.
+
If enabled, the admin must also add one or more
link:config-cla.html[contributor-agreement sections]
in project.config and create agreement files under
`'$site_path'/static`, so users can actually complete one or
more agreements.
+
By default this is false (no agreements are used).
+
To enable the actual usage of contributor agreement the project
specific config option in the `project.config` must be set:
link:config-project-config.html[receive.requireContributorAgreement].

[[auth.trustContainerAuth]]auth.trustContainerAuth::
+
If true then it is the responsibility of the container hosting
Gerrit to authenticate users. In this case Gerrit will blindly trust
the container.
+
This parameter only affects git over http traffic. If set to false
then Gerrit will do the authentication (using Basic authentication).
+
By default this is set to false.


[[auth.gitBasicAuthPolicy]]auth.gitBasicAuthPolicy::
+
When `auth.type` is `LDAP` or `OAUTH`, it allows using either the generated
HTTP password, the LDAP or OAUTH password, or a combination of HTTP and LDAP
authentication, to authenticate Git over HTTP and REST API requests.
The supported values are:
+
*`HTTP`
+
Only the randomly generated HTTP password is accepted when doing Git over HTTP
and REST API requests.
+
*`LDAP`
+
Only the `LDAP` password is allowed when doing Git over HTTP and REST API
requests.
+
*`OAUTH`
+
Only the `OAUTH` password is allowed when doing Git over HTTP and REST API
requests.
+
*`HTTP_LDAP`
+
The password in the request is first checked against the HTTP password and, if
it does not match, it is then validated against the `LDAP` password.
+
By default this is set to `LDAP` when link:#auth.type[`auth.type`] is `LDAP`
and `OAUTH` when link:#auth.type[`auth.type`] is `OAUTH`.
Otherwise, the default value is `HTTP`.

[[auth.gitOAuthProvider]]auth.gitOAuthProvider::
+
Selects the OAuth 2 provider to authenticate git over HTTP traffic with.
+
In general there is no way to determine from an access token alone, which
OAuth 2 provider to address to verify that token, and the BasicAuth
scheme does not support amending such details. If multiple OAuth provider
plugins in a system offer support for git over HTTP authentication site
administrators must configure, which one to use as default provider.
In case the provider cannot be determined from a request the access token
will be sent to the default provider for verification.
+
The value of this parameter must be the identifier of an OAuth 2 provider
in the form `plugin-name:provider-name`. Consult the respective plugin
documentation for details.

[[auth.userNameToLowerCase]]auth.userNameToLowerCase::
+
If set the username that is received to authenticate a git operation
is converted to lower case for looking up the user account in Gerrit.
+
By setting this parameter a case insensitive authentication for the
git operations can be achieved, if it is ensured that the usernames in
Gerrit (scheme `username`) are stored in lower case (e.g. if the
parameter link:#ldap.accountSshUserName[ldap.accountSshUserName] is
set to `${sAMAccountName.toLowerCase}`). It is important that for all
existing accounts this username is already in lower case. It is not
possible to convert the usernames of the existing accounts to lower
case because this would break the access to existing per-user
branches.
+
This parameter only affects git over http and git over SSH traffic.
+
By default this is set to false.

[[auth.enableRunAs]]auth.enableRunAs::
+
If true HTTP REST APIs will accept the `X-Gerrit-RunAs` HTTP request
header from any users granted the link:access-control.html#capability_runAs[Run As]
capability. The header and capability permit the authenticated user
to impersonate another account.
+
If false the feature is disabled and cannot be re-enabled without
editing gerrit.config and restarting the server.
+
Default is true.

[[auth.allowRegisterNewEmail]]auth.allowRegisterNewEmail::
+
Whether users are allowed to register new email addresses.
+
In addition for the HTTP authentication type
link:#auth.httpemailheader[auth.httpemailheader] must *not* be set to
enable registration of new email addresses.
+
By default, true.

[[cache]]
=== Section cache

[[cache.directory]]cache.directory::
+
Path to a local directory where Gerrit can write cached entities for
future lookup.  This local disk cache is used to retain potentially
expensive to compute information across restarts.  If the location
does not exist, Gerrit will try to create it.
+
Technically, cached entities are persisted as a set of H2 databases
inside this directory.
+
If not absolute, the path is resolved relative to `$site_path`.
+
Default is unset, no disk cache.

[[cache.h2CacheSize]]cache.h2CacheSize::
+
The size of the in-memory cache for each opened H2 cache database, in bytes.
+
Some caches of Gerrit are persistent and are backed by an H2 database.
H2 uses memory to cache its database content. The parameter `h2CacheSize`
allows to limit the memory used by H2 and thus prevent out-of-memory
caused by the H2 database using too much memory.
+
See <<database.h2.cachesize,database.h2.cachesize>> for a detailed discussion.
+
Default is unset, using up to half of the available memory.

H2 will persist this value in the database, so to unset explicitly specify 0.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[cache.h2AutoServer]]cache.h2AutoServer::
+
If set to true, enable H2 autoserver mode for the H2-backed persistent cache
databases.
+
See link:http://www.h2database.com/html/features.html#auto_mixed_mode[here]
for detail.
+
Default is false.

[[cache.name.maxAge]]cache.<name>.maxAge::
+
Maximum age to keep an entry in the cache. Entries are removed from
the cache and refreshed from source data every maxAge interval.
Values should use common unit suffixes to express their setting:
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days
* w, week, weeks (`1 week` is treated as `7 days`)
* mon, month, months (`1 month` is treated as `30 days`)
* y, year, years (`1 year` is treated as `365 days`)

+
--
If a unit suffix is not specified, `seconds` is assumed.  If 0 is
supplied, the maximum age is infinite and items are never purged
except when the cache is full.

Default is `0`, meaning store forever with no expire, except:

* `"adv_bases"`: default is `10 minutes`
* `"ldap_groups"`: default is `1 hour`
* `"web_sessions"`: default is `12 hours`
--

[[cache.name.memoryLimit]]cache.<name>.memoryLimit::
+
The total cost of entries to retain in memory. The cost computation
varies by the cache. For most caches where the in-memory size of each
entry is relatively the same, memoryLimit is currently defined to be
the number of entries held by the cache (each entry costs 1).
+
For caches where the size of an entry can vary significantly between
individual entries (notably `"diff"`, `"diff_intraline"`), memoryLimit
is an approximation of the total number of bytes stored by the cache.
Larger entries that represent bigger patch sets or longer source files
will consume a bigger portion of the memoryLimit. For these caches the
memoryLimit should be set to roughly the amount of RAM (in bytes) the
administrator can dedicate to the cache.
+
Default is 1024 for most caches, except:
+
* `"adv_bases"`: default is `4096`
* `"diff"`: default is `10m` (10 MiB of memory)
* `"diff_intraline"`: default is `10m` (10 MiB of memory)
* `"diff_summary"`: default is `10m` (10 MiB of memory)
* `"plugin_resources"`: default is 2m (2 MiB of memory)

+
If set to 0 the cache is disabled. Entries are removed immediately
after being stored by the cache. This is primarily useful for testing.

[[cache.name.diskLimit]]cache.<name>.diskLimit::
+
Total size in bytes of the keys and values stored on disk. Caches that
have grown bigger than this size are scanned daily at 1 AM local
server time to trim the cache. Entries are removed in least recently
accessed order until the cache fits within this limit.  Caches may
grow larger than this during the day, as the size check is only
performed once every 24 hours.
+
Default is 128 MiB per cache, except:
+
* `"diff_summary"`: default is `1g` (1 GiB of disk space)

+
If 0, disk storage for the cache is disabled.

==== [[cache_names]]Standard Caches

cache `"accounts"`::
+
Cache entries contain important details of an active user, including
their display name, preferences, known email addresses, and group
memberships.  Entry information is obtained from the following
database tables:
+
* `accounts`
+
* `account_group_members`
+
* `account_external_ids`

+
If direct updates are made to any of these database tables, this
cache should be flushed.

cache `"accounts_byemail"`::
+
Caches account identities keyed by email address, which is scanned
from the `account_external_ids` database table.  If updates are
made to this table, this cache should be flushed.

cache `"adv_bases"`::
+
Used only for push over smart HTTP when branch level access controls
are enabled.  The cache entry contains all commits that are available
for the client to use as potential delta bases.  Push over smart HTTP
requires two HTTP requests, and this cache tries to carry state from
the first request into the second to ensure it can complete.

cache `"changes"`::
+
The size of `memoryLimit` determines the number of projects for which
all changes will be cached. If the cache is set to 1024, this means all
changes for up to 1024 projects can be held in the cache.
+
Default value is 0 (disabled). It is disabled by default due to the fact
that change updates are not communicated between Gerrit servers. Hence
this cache should be disabled in an multi-master/multi-slave setup.
+
The cache should be flushed whenever the database changes table is modified
outside of Gerrit.

cache `"diff"`::
+
Each item caches the differences between two commits, at both the
directory and file levels.  Gerrit uses this cache to accelerate
the display of affected file names, as well as file contents.
+
Entries in this cache are relatively large, so memoryLimit is an
estimate in bytes of memory used. Administrators should try to target
cache.diff.memoryLimit to fit all changes users will view in a 1 or 2
day span.

cache `"diff_intraline"`::
+
Each item caches the intraline difference of one file, when compared
between two commits. Gerrit uses this cache to accelerate display of
intraline differences when viewing a file.
+
Entries in this cache are relatively large, so memoryLimit is an
estimate in bytes of memory used. Administrators should try to target
cache.diff.memoryLimit to fit all files users will view in a 1 or 2
day span.

cache `"diff_summary"`::
+
Each item caches list of file paths which are different between two
commits. Gerrit uses this cache to accelerate computing of the list
of paths of changed files.
+
Ideally, disk limit of this cache is large enough to cover all changes.
This should significantly speed up change reindexing, especially
full offline reindexing.

cache `"git_tags"`::
+
If branch or reference level READ access controls are used, this
cache tracks which tags are reachable from the branch tips of a
repository.  Gerrit uses this information to determine the set
of tags that a client may access, derived from which tags are
part of the history of a visible branch.
+
The cache is persisted to disk across server restarts as it can
be expensive to compute (60 or more seconds for a large history
like the Linux kernel repository).

cache `"groups"`::
+
Caches the basic group information from the `account_groups` table,
including the group owner, name, and description.
+
Gerrit group membership obtained from the `account_group_members`
table is cached under the `"accounts"` cache, above.  External group
membership obtained from LDAP is cached under `"ldap_groups"`.

cache `"groups_byinclude"`::
+
Caches group inclusions in other groups.  If direct updates are made
to the `account_group_includes` table, this cache should be flushed.

cache `"groups_members"`::
+
Caches subgroups.  If direct updates are made to the
`account_group_includes` table, this cache should be flushed.

cache `"ldap_groups"`::
+
Caches the LDAP groups that a user belongs to, if LDAP has been
configured on this server.  This cache should be configured with a
low maxAge setting, to ensure LDAP modifications are picked up in
a timely fashion.

cache `"ldap_groups_byinclude"`::
+
Caches the hierarchical structure of LDAP groups.

cache `"ldap_usernames"`::
+
Caches a mapping of LDAP username to Gerrit account identity.  The
cache automatically updates when a user first creates their account
within Gerrit, so the cache expire time is largely irrelevant.

cache `"permission_sort"`::
+
Caches the order in which access control sections must be applied to a
reference.  Sorting the sections can be expensive when regular
expressions are used, so this cache remembers the ordering for
each branch.

cache `"plugin_resources"`::
+
Caches formatted plugin resources, such as plugin documentation that
has been converted from Markdown to HTML. The memoryLimit refers to
the bytes of memory dedicated to storing the documentation.

cache `"projects"`::
+
Caches the project description records, from the `projects` table
in the database.  If a project record is updated or deleted, this
cache should be flushed.  Newly inserted projects do not require
a cache flush, as they will be read upon first reference.

cache `"sshkeys"`::
+
Caches unpacked versions of user SSH keys, so the internal SSH daemon
can match against them during authentication.  The unit of storage
is per-user, so 1024 items translates to 1024 unique user accounts.
As each individual user account may configure multiple SSH keys,
the total number of keys may be larger than the item count.
+
This cache is based off the `account_ssh_keys` table and the
`accounts.ssh_user_name` column in the database.  If either is
modified directly, this cache should be flushed.

cache `"web_sessions"`::
+
Tracks the live user sessions coming in over HTTP.  Flushing this
cache would cause all users to be signed out immediately, forcing
them to sign-in again.  To avoid breaking active users, this cache
is not flushed automatically by `gerrit flush-caches --all`, but
instead must be explicitly requested.
+
If no disk cache is configured (or `cache.web_sessions.diskLimit`
is set to 0) a server restart will force all users to sign-out,
and need to sign-in again after the restart, as the cache was
unable to persist the session information.  Enabling a disk cache
is strongly recommended.
+
Session storage is relatively inexpensive. The average entry in
this cache is approximately 346 bytes.

See also link:cmd-flush-caches.html[gerrit flush-caches].

==== [[cache_options]]Cache Options

[[cache.diff.timeout]]cache.diff.timeout::
+
Maximum number of milliseconds to wait for diff data before giving up and
falling back on a simpler diff algorithm that will not be able to break down
modified regions into smaller ones. This is a work around for an infinite loop
bug in the default difference algorithm implementation.
+
Values should use common unit suffixes to express their setting:
+
* ms, milliseconds
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours

+
--
If a unit suffix is not specified, `milliseconds` is assumed.

Default is 5 seconds.
--

[[cache.diff_intraline.timeout]]cache.diff_intraline.timeout::
+
Maximum number of milliseconds to wait for intraline difference data
before giving up and disabling it for a particular file pair.  This is
a work around for an infinite loop bug in the intraline difference
implementation.
+
If computation takes longer than the timeout, the worker thread is
terminated, an error message is shown, and no intraline difference is
displayed for the file pair.
+
Values should use common unit suffixes to express their setting:
+
* ms, milliseconds
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours

+
--
If a unit suffix is not specified, `milliseconds` is assumed.

Default is 5 seconds.
--

[[cache.diff_intraline.enabled]]cache.diff_intraline.enabled::
+
Boolean to enable or disable the computation of intraline differences
when populating a diff cache entry.  This flag is provided primarily
as a backdoor to disable the intraline difference feature if
necessary.  To maintain backwards compatibility with prior versions,
this setting will fallback to `cache.diff.intraline` if not set in the
configuration.
+
Default is true, enabled.

[[cache.projects.checkFrequency]]cache.projects.checkFrequency::
+
How often project configuration should be checked for update from Git.
Gerrit Code Review caches project access rules and configuration in
memory, checking the refs/meta/config branch every checkFrequency
minutes to see if a new revision should be loaded and used for future
access. Values can be specified using standard time unit abbreviations
('ms', 'sec', 'min', etc.).
+
If set to 0, checks occur every time, which may slow down operations.
If set to 'disabled' or 'off', no check will ever be done.
Administrators may force the cache to flush with
link:cmd-flush-caches.html[gerrit flush-caches].
+
Default is 5 minutes.

[[cache.projects.loadOnStartup]]cache.projects.loadOnStartup::
+
If the project cache should be loaded during server startup.
+
The cache is loaded concurrently. Admins should ensure that the cache
size set under <<cache.name.memoryLimit,cache.projects.memoryLimit>>
is not smaller than the number of repos.
+
Default is false, disabled.

[[cache.projects.loadThreads]]cache.projects.loadThreads::
+
Only relevant if <<cache.projects.loadOnStartup,cache.projects.loadOnStartup>>
is true.
+
The number of threads to allocate for loading the cache at startup. These
threads will die out after the cache is loaded.
+
Default is the number of CPUs.


[[capability]]
=== Section capability

[[capability.administrateServer]]capability.administrateServer::
+
Names of groups of users that are allowed to exercise the
administrateServer capability, in addition to those listed in
All-Projects. Configuring this option can be a useful fail-safe
to recover a server in the event an administrator removed all
groups from the administrateServer capability, or to ensure that
specific groups always have administration capabilities.
+
----
[capability]
  administrateServer = group Fail Safe Admins
----
+
The configuration file uses group names, not UUIDs.  If a group is
renamed the gerrit.config file must be updated to reflect the new
name. If a group cannot be found for the configured name a warning
is logged and the server will continue normal startup.
+
If not specified (default), only the groups listed by All-Projects
may use the administrateServer capability.


[[change]]
=== Section change

[[change.largeChange]]change.largeChange::
+
Number of changed lines from which on a change is considered as a large
change. The number of changed lines of a change is the sum of the lines
that were inserted and deleted in the change.
+
The specified value is used to visualize the change sizes in the Web UI
in change tables and user dashboards.
+
By default 500.

[[change.updateDelay]]change.updateDelay::
+
How often in seconds the web interface should poll for updates to the
currently open change.  The poller relies on the client's browser
cache to use If-Modified-Since and respect `304 Not Modified` HTTP
responses.  This allows for fast polls, often under 8 milliseconds.
+
With a configured 30 second delay a server with 4900 active users will
typically need to dedicate 1 CPU to the update check.  4900 users
divided by an average delay of 30 seconds is 163 requests arriving per
second.  If requests are served at \~6 ms response time, 1 CPU is
necessary to keep up with the update request traffic.  On a smaller
user base of 500 active users, the default 30 second delay is only 17
requests per second and requires ~10% CPU.
+
If 0 the update polling is disabled.
+
Default is 30 seconds.

[[change.allowBlame]]change.allowBlame::
+
Allow blame on side by side diff. If set to false, blame cannot be used.
+
Default is true.

[[change.allowDrafts]]change.allowDrafts::
+
Allow drafts workflow. If set to false, drafts cannot be created,
deleted or published.
+
Default is true.

[[change.cacheAutomerge]]change.cacheAutomerge::
+
When reviewing diff commits, the left-hand side shows the output of the
result of JGit's automatic merge algorithm. This option controls whether
this output is cached in the change repository, or if only the diff is
cached in the persistent `diff` cache.
+
If true, automerge results are stored in the repository under
`refs/cache-automerge/*`; the results of diffing the change against its
automerge base are stored in the diff cache. If false, no extra data is
stored in the repository, only the diff cache. This can result in slight
performance improvements by reducing the number of refs in the repo.
+
Default is true.

[[change.showAssignee]]change.showAssignee::
+
Allow assignee workflow. If set to false, assignees will not be visible anywhere
in UI.
+
Default is true.

[[change.submitLabel]]change.submitLabel::
+
Label name for the submit button.
+
Default is "Submit".

[[change.submitLabelWithParents]]change.submitLabelWithParents::
+
Label name for the submit button if the change has parents which will
be submitted together with this change.
+
Default is "Submit including parents".

[[change.submitTooltip]]change.submitTooltip::
+
Tooltip for the submit button.  Variables available for replacement
include `${patchSet}` for the current patch set number (1, 2, 3),
`${branch}` for the branch name ("master") and `${commit}` for the
abbreviated commit SHA-1 (`c9c0edb`).
+
Default is "Submit patch set ${patchSet} into ${branch}".

[[change.submitTooltipAncestors]]change.submitTooltipAncestors::
+
Tooltip for the submit button if there are ancestors which would
also be submitted by submitting the change. Additionally to the variables
as in link:#change.submitTooltip[change.submitTooltip], there is the
variable `${submitSize}` indicating the number of changes which are
submitted.
+
Default is "Submit all ${topicSize} changes of the same topic (${submitSize}
changes including ancestors and other changes related by topic)".

[[change.submitWholeTopic]]change.submitWholeTopic::
+
Determines if the submit button submits the whole topic instead of
just the current change.
+
Default is false.

[[change.submitTopicLabel]]change.submitTopicLabel::
+
If `change.submitWholeTopic` is set and a change has a topic,
the label name for the submit button is given here instead of
the configuration `change.submitLabel`.
+
Defaults to "Submit whole topic"

[[change.submitTopicTooltip]]change.submitTopicTooltip::
+
If `change.submitWholeTopic` is configured to true and a change has a
topic, this configuration determines the tooltip for the submit button
instead of `change.submitTooltip`. The variable `${topicSize}` is available
for the number of changes in the same topic to be submitted. The number of
all changes to be submitted is in the variable `${submitSize}`.
+
Defaults to "Submit all ${topicSize} changes of the same topic
(${submitSize} changes including ancestors and other
changes related by topic)".

[[change.replyLabel]]change.replyLabel::
+
Label name for the reply button. In the user interface an ellipsis (…)
is appended.
+
Default is "Reply". In the user interface it becomes "Reply…".

[[change.replyTooltip]]change.replyTooltip::
+
Tooltip for the reply button. In the user interface a note about the
keyboard shortcut is appended.
+
Default is "Reply and score". In the user interface it becomes "Reply
and score (Shortcut: a)".

[[changeCleanup]]
=== Section changeCleanup

This section allows to configure change cleanups and schedules them to
run periodically.

[[changeCleanup.abandonAfter]]changeCleanup.abandonAfter::
+
Period of inactivity after which open changes should be abandoned
automatically.
+
By default `0`, never abandon open changes.
+
[WARNING] Auto-Abandoning changes may confuse/annoy users. When
enabling this, make sure to choose a reasonably large grace period and
inform users in advance.
+
The following suffixes are supported to define the time unit:
+
* `d, day, days`
* `w, week, weeks` (`1 week` is treated as `7 days`)
* `mon, month, months` (`1 month` is treated as `30 days`)
* `y, year, years` (`1 year` is treated as `365 days`)

[[changeCleanup.abandonIfMergeable]]changeCleanup.abandonIfMergeable::
+
Whether changes which are mergeable should be auto-abandoned.
+
By default `true`.

[[changeCleanup.abandonMessage]]changeCleanup.abandonMessage::
+
Change message that should be posted when a change is abandoned.
+
'${URL}' can be used as a placeholder for the Gerrit web URL.
+
By default "Auto-Abandoned due to inactivity, see
${URL}Documentation/user-change-cleanup.html#auto-abandon\n\n
If this change is still wanted it should be restored.".

[[changeCleanup.startTime]]changeCleanup.startTime::
+
Start time to define the first execution of the change cleanups.
If the configured `'changeCleanup.interval'` is shorter than
`'changeCleanup.startTime - now'` the start time will be preponed by
the maximum integral multiple of `'changeCleanup.interval'` so that the
start time is still in the future.
+
----
<day of week> <hours>:<minutes>
or
<hours>:<minutes>

<day of week> : Mon, Tue, Wed, Thu, Fri, Sat, Sun
<hours>       : 00-23
<minutes>     : 0-59
----


[[changeCleanup.interval]]changeCleanup.interval::
+
Interval for periodic repetition of triggering the change cleanups.
The interval must be larger than zero. The following suffixes are supported
to define the time unit for the interval:
+
* `s, sec, second, seconds`
* `m, min, minute, minutes`
* `h, hr, hour, hours`
* `d, day, days`
* `w, week, weeks` (`1 week` is treated as `7 days`)
* `mon, month, months` (`1 month` is treated as `30 days`)
* `y, year, years` (`1 year` is treated as `365 days`)

link:#schedule-examples[Schedule examples] can be found in the
link:#gc[gc] section.

[[changeMerge]]
=== Section changeMerge

[[changeMerge.checkFrequency]]changeMerge.checkFrequency::
+
How often the database should be rescanned for changes that have been
submitted but not merged due to transient errors. Values can be
specified using standard time unit abbreviations ('ms', 'sec', 'min',
etc.). Set to 0 to disable periodic rescanning, only scanning once on
master node startup.
+
Default is 300 seconds (5 minutes).

[[commentlink]]
=== Section commentlink

Comment links are find/replace strings applied to change descriptions,
patch comments, in-line code comments and approval category value descriptions
to turn set strings into hyperlinks.  One common use is for linking to
bug-tracking systems.

In the following example configuration the 'changeid' comment link
will match typical Gerrit Change-Id values and create a hyperlink
to changes which reference it.  The second configuration 'bugzilla'
will hyperlink terms such as 'bug 42' to an external bug tracker,
supplying the argument record number '42' for display.  The third
configuration 'tracker' uses raw HTML to more precisely control
how the replacement is displayed to the user.

----
[commentlink "changeid"]
  match = (I[0-9a-f]{8,40})
  link = "#/q/$1"

[commentlink "bugzilla"]
  match = "(bug\\s+#?)(\\d+)"
  link = http://bugs.example.com/show_bug.cgi?id=$2

[commentlink "tracker"]
  match = ([Bb]ug:\\s+)(\\d+)
  html = $1<a href=\"http://trak.example.com/$2\">$2</a>
----

Comment links can also be specified in `project.config` and sections in
children override those in parents. The only restriction is that to
avoid injecting arbitrary user-supplied HTML in the page, comment links
defined in `project.config` may only supply `link`, not `html`.

[[commentlink.name.match]]commentlink.<name>.match::
+
A JavaScript regular expression to match positions to be replaced
with a hyperlink.  Subexpressions of the matched string can be
stored using groups and accessed with `$'n'` syntax, where 'n'
is the group number, starting from 1.
+
The configuration file parser eats one level of backslashes, so the
character class `\s` requires `\\s` in the configuration file.  The
parser also terminates the line at the first `#`, so a match
expression containing # must be wrapped in double quotes.
+
To match case insensitive strings, a character class with both the
upper and lower case character for each position must be used.  For
example, to match the string `bug` in a case insensitive way the match
pattern `[bB][uU][gG]` needs to be used.
+
The regular expression pattern is applied to the HTML form of the message
in question, which means it needs to assume the data has been escaped.
So `"` needs to be matched as `&amp;quot;`, `<` as `&amp;lt;`, and `'` as
`&amp;#39;`.
+
A common pattern to match is `bug\\s+(\\d+)`.

[[commentlink.name.link]]commentlink.<name>.link::
+
The URL to direct the user to whenever the regular expression is
matched.  Groups in the match expression may be accessed as `$'n'`.
+
The link property is used only when the html property is not present.

[[commentlink.name.html]]commentlink.<name>.html::
+
HTML to replace the entire matched string with.  If present,
this property overrides the link property above.  Groups in the
match expression may be accessed as `$'n'`.
+
The configuration file eats double quotes, so escaping them as
`\"` is necessary to protect them from the parser.

[[commentlink.name.enabled]]commentlink.<name>.enabled::
+
Whether the comment link is enabled. A child project may override a
section in a parent or the site-wide config that is disabled by
specifying `enabled = true`.
+
Disabling sections in `gerrit.config` can be used by site administrators
to create a library of comment links with `html` set that are not
user-supplied and thus can be verified to be XSS-free, but are only
enabled for a subset of projects.
+
By default, true.
+
Note that the names and contents of disabled sections are visible even
to anonymous users via the
link:rest-api-projects.html#get-config[REST API].


[[container]]
=== Section container

These settings are applied only if Gerrit is started as the container
process through Gerrit's 'gerrit.sh' rc.d compatible wrapper script.

[[container.heapLimit]]container.heapLimit::
+
Maximum heap size of the Java process running Gerrit, in bytes.
This property is translated into the '-Xmx' flag for the JVM.
+
Default is platform and JVM specific.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[container.javaHome]]container.javaHome::
+
Path of the JRE/JDK installation to run Gerrit with.  If not set, the
Gerrit startup script will attempt to search your system and guess
a suitable JRE.  Overrides the environment variable 'JAVA_HOME'.

[[container.javaOptions]]container.javaOptions::
+
Additional options to pass along to the Java runtime.  If multiple
values are configured, they are passed in order on the command line,
separated by spaces.  These options are appended onto 'JAVA_OPTIONS'.

For example, it is possible to overwrite Gerrit's default log4j
configuration:

----
  javaOptions = -Dlog4j.configuration=file:///home/gerrit/site/etc/log4j.properties
----

[[container.daemonOpt]]container.daemonOpt::
+
Additional options to pass to the daemon (e.g. '--enable-httpd'). If
multiple values are configured, they are passed in that order to the command
line, separated by spaces.
+
Execute `java -jar gerrit.war daemon --help` to see all possible
options.

[[container.slave]]container.slave::
+
Used on Gerrit slave installations. If set to true the Gerrit JVM is
called with the '--slave' switch, enabling slave mode. If no value is
set (or any other value), Gerrit defaults to master mode.

[[container.startupTimeout]]container.startupTimeout::
+
The maximum time (in seconds) to wait for a gerrit.sh start command
to run a new Gerrit daemon successfully.  If not set, defaults to
90 seconds.

[[container.user]]container.user::
+
Login name (or UID) of the operating system user the Gerrit JVM
will execute as.  If not set, defaults to the user who launched
the 'gerrit.sh' wrapper script.

[[container.war]]container.war::
+
Path of the JAR file to start daemon execution with.  This should
be the path of the local 'gerrit.war' archive.  Overrides the
environment variable 'GERRIT_WAR'.
+
If not set, defaults to '$site_path/bin/gerrit.war', or to
'$HOME/gerrit.war'.


[[core]]
=== Section core

[[core.packedGitWindowSize]]core.packedGitWindowSize::
+
Number of bytes of a pack file to load into memory in a single
read operation.  This is the "page size" of the JGit buffer cache,
used for all pack access operations.  All disk IO occurs as single
window reads.  Setting this too large may cause the process to load
more data than is required; setting this too small may increase
the frequency of `read()` system calls.
+
Default on JGit is 8 KiB on all platforms.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[core.packedGitLimit]]core.packedGitLimit::
+
Maximum number of bytes to load and cache in memory from pack files.
If JGit needs to access more than this many bytes it will unload less
frequently used windows to reclaim memory space within the process.
As this buffer must be shared with the rest of the JVM heap, it
should be a fraction of the total memory available.
+
Default on JGit is 10 MiB on all platforms.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[core.deltaBaseCaseLimit]]core.deltaBaseCacheLimit::
+
Maximum number of bytes to reserve for caching base objects
that multiple deltafied objects reference.  By storing the entire
decompressed base object in a cache Git is able to avoid unpacking
and decompressing frequently used base objects multiple times.
+
Default on JGit is 10 MiB on all platforms.  You probably do not
need to adjust this value.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[core.packedGitOpenFiles]]core.packedGitOpenFiles::
+
Maximum number of pack files to have open at once.  A pack file
must be opened in order for any of its data to be available in
a cached window.
+
If you increase this to a larger setting you may need to also adjust
the ulimit on file descriptors for the host JVM, as Gerrit needs
additional file descriptors available for network sockets and other
repository data manipulation.
+
Default on JGit is 128 file descriptors on all platforms.

[[core.streamFileThreshold]]core.streamFileThreshold::
+
Largest object size, in bytes, that JGit will allocate as a
contiguous byte array.  Any file revision larger than this threshold
will have to be streamed, typically requiring the use of temporary
files under '$GIT_DIR/objects' to implement pseudo-random access
during delta decompression.
+
Servers with very high traffic should set this to be larger than
the size of their common big files.  For example a server managing
the Android platform typically has to deal with ~10-12 MiB XML
files, so `15 m` would be a reasonable setting in that environment.
Setting this too high may cause the JVM to run out of heap space
when handling very big binary files, such as device firmware or
CD-ROM ISO images.
+
Defaults to 25% of the available JVM heap, limited to 2048m.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[core.packedGitMmap]]core.packedGitMmap::
+
When true, JGit will use `mmap()` rather than `malloc()+read()`
to load data from pack files.  The use of mmap can be problematic
on some JVMs as the garbage collector must deduce that a memory
mapped segment is no longer in use before a call to `munmap()`
can be made by the JVM native code.
+
In server applications (such as Gerrit) that need to access many
pack files, setting this to true risks artificially running out
of virtual address space, as the garbage collector cannot reclaim
unused mapped spaces fast enough.
+
Default on JGit is false. Although potentially slower, it yields
much more predictable behavior.

[[core.asyncLoggingBufferSize]]core.asyncLoggingBufferSize::
+
Size of the buffer to store logging events for asynchronous logging.
Putting a larger value can protect threads from stalling when the
AsyncAppender threads are not fast enough to consume the logging events
from the buffer. It also protects from losing log entries in this case.
+
Default is 64 entries.

[[core.useRecursiveMerge]]core.useRecursiveMerge::
+
Use JGit's recursive merger for three-way merges. This only affects
projects that allow content merges.
+
As explained in this
link:http://codicesoftware.blogspot.com/2011/09/merge-recursive-strategy.html[
blog], the recursive merge produces better results if the two commits
that are merged have more than one common predecessor.
+
Default is true.

[[core.repositoryCacheCleanupDelay]]core.repositoryCacheCleanupDelay::
+
Delay between each periodic cleanup of expired repositories.
+
Values can be specified using standard time unit abbreviations (`ms`, `sec`,
`min`, etc.).
+
Set it to 0 in order to switch off cache expiration. If cache expiration is
switched off, the JVM can still evict cache entries when it is running low
on available heap memory.
+
Set it to -1 to automatically derive cleanup delay from
`core.repositoryCacheExpireAfter` (lowest value between 1/10 of
`core.repositoryCacheExpireAfter` and 10 minutes).
+
Default is -1.

[[core.repositoryCacheExpireAfter]]core.repositoryCacheExpireAfter::
+
Time an unused repository should expire and be evicted from the repository
cache.
+
Values can be specified using standard time unit abbreviations (`ms`, `sec`,
`min`, etc.).
+
Default is 1 hour.

[[database]]
=== Section database

The database section configures where Gerrit stores its metadata
records about user accounts and change reviews.

----
[database]
  type = POSTGRESQL
  hostname = localhost
  database = reviewdb
  username = gerrit2
  password = s3kr3t
----

[[database.type]]database.type::
+
Type of database server to connect to.  If set this value will be
used to automatically create correct database.driver and database.url
values to open the connection.
+
* `DB2`
+
Connect to a DB2 database server.
+
* `DERBY`
+
Connect to an Apache Derby database server.
+
* `H2`
+
Connect to a local embedded H2 database.
+
* `JDBC`
+
Connect using a JDBC driver class name and URL.
+
* `MAXDB`
+
Connect to an SAP MaxDB database server.
+
* `MYSQL`
+
Connect to a MySQL database server.
+
* `ORACLE`
+
Connect to an Oracle database server.
+
* `POSTGRESQL`
+
Connect to a PostgreSQL database server.

+
If not specified, database.driver and database.url are used as-is,
and if they are also not specified, defaults to H2.

[[database.hostname]]database.hostname::
+
Hostname of the database server.  Defaults to 'localhost'.

[[database.port]]database.port::
+
Port number of the database server.  Defaults to the default port
of the server named by database.type.

[[database.database]]database.database::
+
For POSTGRESQL or MYSQL, the name of the database on the server.
+
For H2, this is the path to the database, and if not absolute is
relative to `'$site_path'`.

[[database.username]]database.username::
+
Username to connect to the database server as.

[[database.password]]database.password::
+
Password to authenticate to the database server with.

[[database.driver]]database.driver::
+
Name of the JDBC driver class to connect to the database with.
Setting this usually isn't necessary as it can be derived from
database.type or database.url for any supported database.

[[database.url]]database.url::
+
'jdbc:' URL for the database.  Setting this variable usually
isn't necessary as it can be constructed from the all of the
above properties.

[[database.connectionPool]]database.connectionPool::
+
If true, use connection pooling for database connections. Otherwise, a
new database connection is opened for each request.
+
Default is false for MySQL, and true for other database backends.

[[database.poolLimit]]database.poolLimit::
+
Maximum number of open database connections.  If the server needs
more than this number, request processing threads will wait up
to <<database.poolMaxWait, poolMaxWait>> seconds for a
connection to be released before they abort with an exception.
This limit must be several units higher than the total number of
httpd and sshd threads as some request processing code paths may
need multiple connections.
+
Default is <<sshd.threads, sshd.threads>>
 + <<httpd.maxThreads, httpd.maxThreads>> + 2.
+
This setting only applies if
<<database.connectionPool,database.connectionPool>> is true.

[[database.poolMinIdle]]database.poolMinIdle::
+
Minimum number of connections to keep idle in the pool.
Default is 4.
+
This setting only applies if
<<database.connectionPool,database.connectionPool>> is true.

[[database.poolMaxIdle]]database.poolMaxIdle::
+
Maximum number of connections to keep idle in the pool.  If there
are more idle connections, connections will be closed instead of
being returned back to the pool.
Default is min(<<database.poolLimit, database.poolLimit>>, 16).
+
This setting only applies if
<<database.connectionPool,database.connectionPool>> is true.

[[database.poolMaxWait]]database.poolMaxWait::
+
Maximum amount of time a request processing thread will wait to
acquire a database connection from the pool.  If no connection is
released within this time period, the processing thread will abort
its current operations and return an error to the client.
Values should use common unit suffixes to express their setting:
+
* ms, milliseconds
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours

+
--
If a unit suffix is not specified, `milliseconds` is assumed.

Default is `30 seconds`.

This setting only applies if
<<database.connectionPool,database.connectionPool>> is true.
--

[[database.dataSourceInterceptorClass]]database.dataSourceInterceptorClass::

Class that implements DataSourceInterceptor interface to monitor SQL activity.
This class must have default constructor and be available on Gerrit's bootstrap
classpath, e. g. in `$gerrit_site/lib` directory. Example implementation of
SQL monitoring can be found in javamelody-plugin.

[[database.h2]]database.h2::
+
The settings in this section are used for the reviewdb if the
<<database.type,database.type>> is H2.
+
Additionally gerrit uses H2 for storing reviewed flags on changes.

[[database.h2.cacheSize]]database.h2.cacheSize::
+
The size of the H2 internal database cache, in bytes. The H2 internal cache for
persistent H2-backed caches is controlled by
<<cache.h2CacheSize,cache.h2CacheSize>>.
+
H2 uses memory to cache its database content. The parameter `cacheSize`
allows to limit the memory used by H2 and thus prevent out-of-memory
caused by the H2 database using too much memory.
+
Technically the H2 cache size is configured using the CACHE_SIZE parameter in
the H2 JDBC connection URL, as described
link:http://www.h2database.com/html/features.html#cache_settings[here]
+
Default is unset, using up to half of the available memory.

H2 will persist this value in the database, so to unset explicitly specify 0.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[database.h2.autoServer]]database.h2.autoServer::
+
If `true` enable the automatic mixed mode
(see link:http://www.h2database.com/html/features.html#auto_mixed_mode[Automatic Mixed Mode]).
This enables concurrent access to the embedded H2 database from command line
utils (e.g. RebuildNoteDb).
+
Default is `false`.

[[download]]
=== Section download

----
[download]
  command = checkout
  command = cherry_pick
  command = pull
  command = format_patch
  scheme = ssh
  scheme = http
  scheme = anon_http
  scheme = anon_git
  scheme = repo_download
----

The download section configures the allowed download methods.

[[download.command]]download.command::
+
Commands that should be offered to download changes.
+
Multiple commands are supported:
+
* `checkout`
+
Command to fetch and checkout the patch set.
+
* `cherry_pick`
+
Command to fetch the patch set and to cherry-pick it onto the current
commit.
+
* `pull`
+
Command to pull the patch set.
+
* `format_patch`
+
Command to fetch the patch set and to feed it into the `format-patch`
command.

+
If `download.command` is not specified, all download commands are
offered.

[[download.scheme]]download.scheme::
+
Schemes that should be used to download changes.
+
Multiple schemes are supported:
+
* `http`
+
Authenticated HTTP download is allowed.
+
* `ssh`
+
Authenticated SSH download is allowed.
+
* `anon_http`
+
Anonymous HTTP download is allowed.
+
* `anon_git`
+
Anonymous Git download is allowed.  This is not default, it is also
necessary to set <<gerrit.canonicalGitUrl,gerrit.canonicalGitUrl>>
variable.
+
* `repo_download`
+
Gerrit advertises patch set downloads with the `repo download`
command, assuming that all projects managed by this instance are
generally worked on with the repo multi-repository tool.  This is
not default, as not all instances will deploy repo.

+
If `download.scheme` is not specified, SSH, HTTP and Anonymous HTTP
downloads are allowed.

[[download.checkForHiddenChangeRefs]]download.checkForHiddenChangeRefs::
+
Whether the download commands should be adapted when the change refs
are hidden.
+
Git has a configuration option to hide refs from the initial
advertisement (`uploadpack.hideRefs`). This option can be used to hide
the change refs from the client. As consequence fetching changes by
change ref does not work anymore. However by setting
`uploadpack.allowTipSha1InWant` to `true` fetching changes by commit ID
is possible. If `download.checkForHiddenChangeRefs` is set to `true`
the git download commands use the commit ID instead of the change ref
when a project is configured like this.
+
Example git configuration on a project:
+
----
[uploadpack]
  hideRefs = refs/changes/
  hideRefs = refs/cache-automerge/
  allowTipSha1InWant = true
----
+
By default `false`.

[[download.archive]]download.archive::
+
Specifies which archive formats, if any, should be offered on the change
screen and supported for `git-upload-archive` operation:
+
----
[download]
  archive = tar
  archive = tbz2
  archive = tgz
  archive = txz
  archive = zip
----

If `download.archive` is not specified defaults to all archive
commands. Set to `off` or empty string to disable.

Zip is not supported because it may be interpreted by a Java plugin as a
valid JAR file, whose code would have access to cookies on the domain.
For this reason `zip` format is always excluded from formats offered
through the `Download` drop down or accessible in the REST API.

[[download.maxBundleSize]]download.maxBundleSize::
+
Specifies the maximum size of a bundle in bytes that can be downloaded.
As bundles are kept in memory this setting is to protect the server
from a single request consuming too much heap when generating
a bundle and thereby impacting other users.
+
Defaults to 100MB.

[[gc]]
=== Section gc

This section allows to configure the git garbage collection and schedules it
to run periodically. It will be triggered and executed sequentially for all
projects.

[[gc.aggressive]]gc.aggressive::
+
Determines if scheduled garbage collections and garbage collections triggered
through Web-UI should run in aggressive mode or not. Aggressive garbage
collections are more expensive but may lead to significantly smaller
repositories.
+
Valid values are "true" and "false," default is "false".

[[gc.startTime]]gc.startTime::
+
Start time to define the first execution of the git garbage collection.
If the configured `'gc.interval'` is shorter than `'gc.startTime - now'`
the start time will be preponed by the maximum integral multiple of
`'gc.interval'` so that the start time is still in the future.
+
----
<day of week> <hours>:<minutes>
or
<hours>:<minutes>

<day of week> : Mon, Tue, Wed, Thu, Fri, Sat, Sun
<hours>       : 00-23
<minutes>     : 0-59
----


[[gc.interval]]gc.interval::
+
Interval for periodic repetition of triggering the git garbage collection.
The interval must be larger than zero. The following suffixes are supported
to define the time unit for the interval:
+
* `s, sec, second, seconds`
* `m, min, minute, minutes`
* `h, hr, hour, hours`
* `d, day, days`
* `w, week, weeks` (`1 week` is treated as `7 days`)
* `mon, month, months` (`1 month` is treated as `30 days`)
* `y, year, years` (`1 year` is treated as `365 days`)

[[schedule-examples]]
Examples::
+
----
gc.startTime = Fri 10:30
gc.interval  = 2 day
----
+
Assuming the server is started on Mon 7:00 -> `'startTime - now = 4 days 3:30 hours'`.
This is larger than the interval hence prepone the start time
by the maximum integral multiple of the interval so that start
time is still in the future, i.e. prepone by 4 days. This yields
a start time of Mon 10:30, next executions are Wed 10:30, Fri 10:30
etc.
+
----
gc.startTime = 6:00
gc.interval = 1 day
----
+
Assuming the server is started on Mon 7:00 this yields the first run on next Tuesday
at 6:00 and a repetition interval of 1 day.


[[gerrit]]
=== Section gerrit

[[gerrit.basePath]]gerrit.basePath::
+
Local filesystem directory holding all Git repositories that
Gerrit knows about and can process changes for.  A project
entity in Gerrit maps to a local Git repository by creating
the path string `"${basePath}/${project_name}.git"`.
+
If relative, the path is resolved relative to `'$site_path'`.

[[gerrit.allProjects]]gerrit.allProjects::
+
Name of the permissions-only project defining global server
access controls and settings. These are inherited into every
other project managed by the running server. The name is
relative to `gerrit.basePath`.
+
Defaults to `All-Projects` if not set.

[[gerrit.allUsers]]gerrit.allUsers::
+
Name of the project in which meta data of all users is stored.
The name is relative to `gerrit.basePath`.
+
Defaults to `All-Users` if not set.

[[gerrit.canonicalWebUrl]]gerrit.canonicalWebUrl::
+
The default URL for Gerrit to be accessed through.
+
Typically this would be set to something like "http://review.example.com/"
or "http://example.com:8080/gerrit/" so Gerrit can output links that point
back to itself.
+
Setting this is highly recommended, as its necessary for the upload
code invoked by "git push" or "repo upload" to output hyperlinks
to the newly uploaded changes.

[[gerrit.canonicalGitUrl]]gerrit.canonicalGitUrl::
+
Optional base URL for repositories available over the anonymous git
protocol.  For example, set this to `git://mirror.example.com/base/`
to have Gerrit display patch set download URLs in the UI.  Gerrit
automatically appends the project name onto the end of the URL.
+
By default unset, as the git daemon must be configured externally
by the system administrator, and might not even be running on the
same host as Gerrit.

[[gerrit.docUrl]]gerrit.docUrl::
+
Optional base URL for documentation, under which one can find
"index.html", "rest-api.html", etc. Used as the base for the fixed set
of links in the "Documentation" tab. A slash is implicitly appended.
(For finer control over the top menu, consider writing a
link:dev-plugins.html#top-menu-extensions[plugin].)
+
If unset or empty, the documentation tab will only be shown if
`/Documentation/index.html` can be reached by the browser at app load
time.

[[gerrit.editGpgKeys]]gerrit.editGpgKeys::
+
If enabled and server-side signed push validation is also
link:#receive.enableSignedPush[enabled], enable the
link:rest-api-accounts.html#list-gpg-keys[REST API endpoints] and web UI
for editing GPG keys. If disabled, GPG keys can only be added by
administrators with direct git access to All-Users.
+
Defaults to true.

[[gerrit.installCommitMsgHookCommand]]gerrit.installCommitMsgHookCommand::
+
Optional command to install the `commit-msg` hook. Typically of the
form:
+
----
fetch-cmd some://url/to/commit-msg .git/hooks/commit-msg ; chmod +x .git/hooks/commit-msg
----
+
By default unset; falls back to using scp from the canonical SSH host,
or curl from the canonical HTTP URL for the server.  Only necessary if a
proxy or other server/network configuration prevents clients from
fetching from the default location.

[[gerrit.gitHttpUrl]]gerrit.gitHttpUrl::
+
Optional base URL for repositories available over the HTTP
protocol.  For example, set this to `http://mirror.example.com/base/`
to have Gerrit display URLs from this server, rather than itself.
+
By default unset, as the HTTP daemon must be configured externally
by the system administrator, and might not even be running on the
same host as Gerrit.

[[gerrit.installModule]]gerrit.installModule::
+
Repeatable list of class name of additional Guice modules to load at
Gerrit startup and init phases.
Classes are resolved using the primary Gerrit class loader, hence the
class needs to be either declared in Gerrit or an additional JAR
located under the `/lib` directory.
+
By default unset.
+
Example:
----
[gerrit]
  installModule = com.googlesource.gerrit.libmodule.MyModule
  installModule = com.example.abc.OurSpecialSauceModule
----

[[gerrit.reportBugUrl]]gerrit.reportBugUrl::
+
URL to direct users to when they need to report a bug.
+
By default unset, meaning no bug report URL will be displayed. Administrators
should set this to the URL of their issue tracker, if necessary.

[[gerrit.reportBugText]]gerrit.reportBugText::
+
Text to be displayed in the link to the bug report URL.
+
Only used when `gerrit.reportBugUrl` is set.
+
Defaults to "Report Bug".

[[gerrit.disableReverseDnsLookup]]gerrit.disableReverseDnsLookup::
+
Disables reverse DNS lookup during computing ref log entry for identified user.
+
Defaults to false.

[[gerrit.secureStoreClass]]gerrit.secureStoreClass::
+
Use the secure store implementation from a specified class.
+
If specified, must be the fully qualified class name of a class that implements
the `com.google.gerrit.server.securestore.SecureStore` interface, and the jar
file containing the class must be placed in the `$site_path/lib` folder.
+
If not specified, the default no-op implementation is used.

[[gerrit.canLoadInIFrame]]gerrit.canLoadInIFrame::
+
For security reasons Gerrit will always jump out of iframe.
Setting this option to true will prevent this behavior.
+
By default false.

[[gitweb]]
=== Section gitweb

Gerrit can forward requests to either an internally managed gitweb
(which allows Gerrit to enforce some access controls), or to an
externally managed gitweb (where the web server manages access).
See also link:config-gitweb.html[Gitweb Integration].

[[gitweb.cgi]]gitweb.cgi::
+
Path to the locally installed `gitweb.cgi` executable.  This CGI will
be called by Gerrit Code Review when the URL `/gitweb` is accessed.
Project level access controls are enforced prior to calling the CGI.
+
Defaults to `/usr/lib/cgi-bin/gitweb.cgi` if `gitweb.url` is not set.

[[gitweb.url]]gitweb.url::
+
Optional URL of an affiliated gitweb service.  Defines the
web location where a `gitweb.cgi` is installed to browse
`gerrit.basePath` and the repositories it contains.
+
Gerrit appends any necessary query arguments onto the end of this URL.
For example, `?p=$project.git;h=$commit`.

[[gitweb.type]]gitweb.type::
+
Optional type of affiliated gitweb service. This allows using
alternatives to gitweb, such as cgit.
+
Valid values are `gitweb`, `cgit`, `disabled` or `custom`.
+
If not set, or set to `disabled`, there is no gitweb hyperlinking
support.

[[gitweb.revision]]gitweb.revision::
+
Optional pattern to use for constructing the gitweb URL when pointing
at a specific commit when `gitweb.type` is set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit
and `${commit}` for the SHA1 hash for the commit.

[[gitweb.project]]gitweb.project::
+
Optional pattern to use for constructing the gitweb URL when pointing
at a specific project when `gitweb.type` is set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit.

[[gitweb.branch]]gitweb.branch::
+
Optional pattern to use for constructing the gitweb URL when pointing
at a specific branch when `gitweb.type` is set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit
and `${branch}` for the name of the branch.

[[gitweb.roottree]]gitweb.roottree::
+
Optional pattern to use for constructing the gitweb URL when pointing
at the contents of the root tree in a specific commit when `gitweb.type`
is set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit
and `${commit}` for the SHA1 hash for the commit.

[[gitweb.file]]gitweb.file::
+
Optional pattern to use for constructing the gitweb URL when pointing
at the contents of a file in a specific commit when `gitweb.type` is
set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit,
`${file}` for the file name and `${commit}` for the SHA1 hash for
the commit.

[[gitweb.filehistory]]gitweb.filehistory::
+
Optional pattern to use for constructing the gitweb URL when pointing
at the history of a file in a specific branch when when `gitweb.type`
is set to `custom`.
+
Valid replacements are `${project}` for the project name in Gerrit,
`${file}` for the file name and `${branch}` for the name of the
branch.

[[gitweb.linkname]]gitweb.linkname::
+
Optional setting for modifying the link name presented to the user
in the Gerrit web-UI.
+
The default linkname for custom type is `gitweb`.

[[gitweb.pathSeparator]]gitweb.pathSeparator::
+
Optional character to substitute the standard path separator (slash) in
project names and branch names.
+
By default, Gerrit will use hexadecimal encoding for slashes in project and
branch names. Some web servers, such as Tomcat, reject this hexadecimal
encoding in the URL.
+
Some alternative gitweb services, such as link:http://gitblit.com[Gitblit],
allow using an alternative path separator character. In Gitblit, this can be
configured through the property link:http://gitblit.com/properties.html[web.forwardSlashCharacter].
In Gerrit, the alternative path separator can be configured correspondingly
using the property `gitweb.pathSeparator`.
+
Valid values are the characters `*`, `(` and `)`.

[[gitweb.urlEncode]]gitweb.urlEncode::
+
Whether or not Gerrit should encode the generated viewer URL.
+
Gerrit composes the viewer URL using information about the project, branch, file
or commit of the target object to be displayed. Typically viewers such as CGit
and gitweb do need those parts to be encoded, including the `/` in project's name,
for being correctly parsed.
However other viewers could instead require an unencoded URL (e.g. GitHub web
based viewer).
+
Valid values are `true` and `false`. The default is `true`.

[[groups]]
=== Section groups

[[groups.newGroupsVisibleToAll]]groups.newGroupsVisibleToAll::
+
Controls whether newly created groups should be by default visible to
all registered users.
+
By default, false.

[[groups.uuid.name]]groups.<uuid>.name::
+
Display name for group with the given UUID.
+
This option is only supported for system groups (scheme 'global').
+
E.g. this parameter can be used to configure another name for the
`Anonymous Users` group:
+
----
[groups "global:Anonymous-Users"]
  name = All Users
----
+
When setting this parameter it should be verified that there is no
existing group with the same name (case-insensitive). Configuring an
ambiguous name makes Gerrit fail on startup. Once set Gerrit ensures
that it is not possible to create a group with this name. Gerrit also
keeps the default name reserved so that it cannot be used for new
groups either. This means there is no danger of ambiguous group names
when this parameter is removed and the system group uses the default
name again.

[[http]]
=== Section http

[[http.proxy]]http.proxy::
+
URL of the proxy server when making outgoing HTTP
connections for OpenID login transactions.  Syntax
should be `http://`'hostname'`:`'port'.

[[http.proxyUsername]]http.proxyUsername::
+
Optional username to authenticate to the HTTP proxy with.
This property is honored only if the username does not
appear in the http.proxy property above.

[[http.proxyPassword]]http.proxyPassword::
+
Optional password to authenticate to the HTTP proxy with.
This property is honored only if the password does not
appear in the http.proxy property above.

[[http.addUserAsRequestAttribute]]http.addUserAsRequestAttribute::
+
If true, 'User' attribute will be added to the request attributes so it
can be accessed outside the request scope (will be set to username or id
if username not configured).
+
This attribute can be used by the servlet container to log user in the
http access log.
+
When running the embedded servlet container, this attribute is used to
print user in the httpd_log.
+
* `%{User}r`
+
Pattern to print user in Tomcat AccessLog.

+
Default value is true.

[[httpd]]
=== Section httpd

The httpd section configures the embedded servlet container.

[[httpd.listenUrl]]httpd.listenUrl::
+
Specifies the URLs the internal HTTP daemon should listen for
connections on.  The special hostname '*' may be used to listen
on all local addresses.  A context path may optionally be included,
placing Gerrit Code Review's web address within a subdirectory of
the server.
+
Multiple protocol schemes are supported:
+
* `http://`'hostname'`:`'port'
+
Plain-text HTTP protocol.  If port is not supplied, defaults to 80,
the standard HTTP port.
+
* `https://`'hostname'`:`'port'
+
SSL encrypted HTTP protocol.  If port is not supplied, defaults to
443, the standard HTTPS port.
+
Externally facing production sites are encouraged to use a reverse
proxy configuration and `proxy-https://` (below), rather than using
the embedded servlet container to implement the SSL processing.
The proxy server with SSL support is probably easier to configure,
provides more configuration options to control cipher usage, and
is likely using natively compiled encryption algorithms, resulting
in higher throughput.
+
* `proxy-http://`'hostname'`:`'port'
+
Plain-text HTTP relayed from a reverse proxy.  If port is not
supplied, defaults to 8080.
+
Like http, but additional header parsing features are
enabled to honor X-Forwarded-For, X-Forwarded-Host and
X-Forwarded-Server.  These headers are typically set by Apache's
link:http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#x-headers[mod_proxy].
+
* `proxy-https://`'hostname'`:`'port'
+
Plain text HTTP relayed from a reverse proxy that has already
handled the SSL encryption/decryption.  If port is not supplied,
defaults to 8080.
+
Behaves exactly like proxy-http, but also sets the scheme to assume
'https://' is the proper URL back to the server.

+
--
If multiple values are supplied, the daemon will listen on all
of them.

By default, http://*:8080.
--

[[httpd.reuseAddress]]httpd.reuseAddress::
+
If true, permits the daemon to bind to the port even if the port
is already in use.  If false, the daemon ensures the port is not
in use before starting.  Busy sites may need to set this to true
to permit fast restarts.
+
By default, true.

[[httpd.inheritChannel]]httpd.inheritChannel::
+
If true, permits the daemon to inherit its server socket channel
from fd0/1(stdin/stdout). When set to true, the server can be socket
activated via systemd or xinetd.
+
By default, false.

[[httpd.requestHeaderSize]]httpd.requestHeaderSize::
+
Size, in bytes, of the buffer used to parse the HTTP headers of an
incoming HTTP request.  The entire request headers, including any
cookies sent by the browser, must fit within this buffer, otherwise
the server aborts with the response '413 Request Entity Too Large'.
+
One buffer of this size is allocated per active connection.
Allocating a buffer that is too large wastes memory that cannot be
reclaimed, allocating a buffer that is too small may cause unexpected
errors caused by very long Referer URLs or large cookie values.
+
By default, 16384 (16 K), which is sufficient for most OpenID and
other web-based single-sign-on integrations.

[[httpd.sslCrl]]httpd.sslCrl::
+
Path of the certificate revocation list file in PEM format. This
crl file is optional, and available for CLIENT_SSL_CERT_LDAP
authentication.
+
To create and view a crl using openssl:
+
----
openssl ca -gencrl -out crl.pem
openssl crl -in crl.pem -text
----
+
If not absolute, the path is resolved relative to `$site_path`.
+
By default, `$site_path/etc/crl.pem`.

[[httpd.sslKeyStore]]httpd.sslKeyStore::
+
Path of the Java keystore containing the server's SSL certificate
and private key.  This keystore is required for `https://` in URL.
+
To create a self-signed certificate for simple internal usage:
+
----
keytool -keystore keystore -alias jetty -genkey -keyalg RSA
chmod 600 keystore
----
+
If not absolute, the path is resolved relative to `$site_path`.
+
By default, `$site_path/etc/keystore`.

[[httpd.sslKeyPassword]]httpd.sslKeyPassword::
+
Password used to decrypt the private portion of the sslKeyStore.
Java keystores require a password, even if the administrator
doesn't want to enable one.
+
If set to the empty string the embedded server will prompt for the
password during startup.
+
By default, `gerrit`.

[[httpd.requestLog]]httpd.requestLog::
+
Enable (or disable) the `'$site_path'/logs/httpd_log` request log.
If enabled, an NCSA combined log format request log file is written
out by the internal HTTP daemon.
+
`log4j.appender` with the name `httpd_log` can be configured to overwrite
programmatic configuration.
+
By default, true if httpd.listenUrl uses http:// or https://,
and false if httpd.listenUrl uses proxy-http:// or proxy-https://.

[[httpd.acceptorThreads]]httpd.acceptorThreads::
+
Number of worker threads dedicated to accepting new incoming TCP
connections and allocating them connection-specific resources.
+
By default, 2, which should be suitable for most high-traffic sites.

[[httpd.minThreads]]httpd.minThreads::
+
Minimum number of spare threads to keep in the worker thread pool.
This number must be at least 1 larger than httpd.acceptorThreads
multiplied by the number of httpd.listenUrls configured.
+
By default, 5, suitable for most lower-volume traffic sites.

[[httpd.maxThreads]]httpd.maxThreads::
+
Maximum number of threads to permit in the worker thread pool.
+
By default 25, suitable for most lower-volume traffic sites.

[[httpd.maxQueued]]httpd.maxQueued::
+
Maximum number of client connections which can enter the worker
thread pool waiting for a worker thread to become available.
0 sets the queue size to the Integer.MAX_VALUE.
+
By default 200.

[[httpd.maxWait]]httpd.maxWait::
+
Maximum amount of time a client will wait for an available
thread to handle a project clone, fetch or push request over the
smart HTTP transport.
+
Values should use common unit suffixes to express their setting:
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days
* w, week, weeks (`1 week` is treated as `7 days`)
* mon, month, months (`1 month` is treated as `30 days`)
* y, year, years (`1 year` is treated as `365 days`)

+
--
If a unit suffix is not specified, `minutes` is assumed.  If 0
is supplied, the maximum age is infinite and connections will not
abort until the client disconnects.

By default, 5 minutes.
--

[[httpd.filterClass]]httpd.filterClass::
+
Class that implements the javax.servlet.Filter interface
for filtering any HTTP related traffic going through the Gerrit
HTTP protocol.
Class is loaded and configured in the Gerrit Jetty container
and run in front of all Gerrit URL handlers, allowing the filter
to inspect, modify, allow or reject each request.
It needs to be provided as JAR library
under $GERRIT_SITE/lib as it is resolved using the default Gerrit class
loader and cannot be dynamically loaded by a plugin.
+
Failing to load the Filter class would result in a Gerrit start-up
failure, as this class is supposed to provide mandatory filtering
in front of Gerrit HTTP protocol.
+
Typical usage is in conjunction with the `auth.type=HTTP` as replacement
of an Apache HTTP proxy layer as security enforcement on top of Gerrit
by returning a trusted username as HTTP Header.
+
Example of using a security library secure.jar under $GERRIT_SITE/lib
that provides a org.anyorg.MySecureFilter Servlet Filter that enforces
a trusted username in the `TRUSTED_USER` HTTP Header:

----
[auth]
	type = HTTP
	httpHeader = TRUSTED_USER

[httpd]
	filterClass = org.anyorg.MySecureFilter
----

[[httpd.robotsFile]]httpd.robotsFile::
+
Location of an external robots.txt file to be used instead of the one
bundled with the .war of the application.
+
If not absolute, the path is resolved relative to `$site_path`.
+
If the file doesn't exist or can't be read the default robots.txt file
bundled with the .war will be used instead.

[[httpd.registerMBeans]]httpd.registerMBeans::
+
Enable (or disable) registration of Jetty MBeans for Java JMX.
+
By default, false.

[[index]]
=== Section index

The index section configures the secondary index.

Note that after enabling the secondary index, the index must be built
using the link:pgm-reindex.html[reindex program] before restarting the
Gerrit server.

[[index.type]]index.type::
+
Type of secondary indexing employed by Gerrit.  The supported
values are:
+
* `LUCENE`
+
A link:http://lucene.apache.org/[Lucene] index is used.
+
+
* `ELASTICSEARCH`
+
An link:http://www.elasticsearch.org/[Elasticsearch] index is used.

+
By default, `LUCENE`.

[[index.threads]]index.threads::
+
Number of threads to use for indexing in normal interactive operations. Setting
it to 0 disables the dedicated thread pool and indexing will be done in the same
thread as the operation.
+
If not set or set to a negative value, defaults to 1 plus half of the number of
logical CPUs as returned by the JVM.

[[index.batchThreads]]index.batchThreads::
+
Number of threads to use for indexing in background operations, such as
online schema upgrades.
+
If not set or set to a negative value, defaults to the number of logical
CPUs as returned by the JVM.

[[index.onlineUpgrade]]index.onlineUpgrade::
+
Whether to upgrade to new index schema versions while the server is
running. This is recommended as it prevents additional downtime during
Gerrit version upgrades (avoiding the need for an offline reindex step
using Reindex), but can add additional server load during the upgrade.
+
If set to false, there is no way to upgrade the index schema to take
advantage of new search features without restarting the server.
+
Defaults to true.

[[index.maxLimit]]index.maxLimit::
+
Maximum limit to allow for search queries. Requesting results above this
limit will truncate the list (but will still set `_more_changes` on
result lists). Set to 0 for no limit.
+
Defaults to no limit.

[[index.maxPages]]index.maxPages::
+
Maximum number of pages of search results to allow, as index
implementations may have to scan through large numbers of skipped
results when searching with an offset. Requesting results starting past
this threshold times the requested limit will result in an error. Set to
0 for no limit.
+
Defaults to no limit.

[[index.maxTerms]]index.maxTerms::
+
Maximum number of leaf terms to allow in a query. Too-large queries may
perform poorly, so setting this option causes query parsing to fail fast
before attempting to send them to the secondary index. Should this limit
be reached, database is used instead of index as applicable.
+
When the index type is `LUCENE`, also sets the maximum number of clauses
permitted per BooleanQuery. This is so that all enforced query limits
are the same.
+
Defaults to 1024.

==== Lucene configuration

Open and closed changes are indexed in separate indexes named
'open' and 'closed' respectively.

The following settings are only used when the index type is `LUCENE`.

[[index.name.ramBufferSize]]index.name.ramBufferSize::
+
Determines the amount of RAM that may be used for buffering added documents
and deletions before they are flushed to the index.  See the
link:http://lucene.apache.org/core/4_6_0/core/org/apache/lucene/index/LiveIndexWriterConfig.html#setRAMBufferSizeMB(double)[
Lucene documentation] for further details.
+
Defaults to 16M.

[[index.name.maxBufferedDocs]]index.name.maxBufferedDocs::
+
Determines the minimal number of documents required before the buffered
in-memory documents are flushed to the index. Large values generally
give faster indexing.  See the
link:http://lucene.apache.org/core/4_6_0/core/org/apache/lucene/index/LiveIndexWriterConfig.html#setMaxBufferedDocs(int)[
Lucene documentation] for further details.
+
Defaults to -1, meaning no maximum is set and the writer will flush
according to RAM usage.

[[index.name.commitWithin]]index.name.commitWithin::
+
Determines the period at which changes are automatically committed to
stable store on disk. This is a costly operation and may block
additional index writes, so lower with caution.
+
If zero, changes are committed after every write. This is very costly
but may be useful if offline reindexing is infeasible, or for development
servers.
+
Values can be specified using standard time unit abbreviations (`ms`, `sec`,
`min`, etc.).
+
If negative, `commitWithin` is disabled. Changes are flushed to disk when
the in-memory buffer fills, but only committed and guaranteed to be synced
to disk when the process finishes.
+
Defaults to 300000 ms (5 minutes).

Sample Lucene index configuration:
----
[index]
  type = LUCENE

[index "changes_open"]
  ramBufferSize = 60 m
  maxBufferedDocs = 3000

[index "changes_closed"]
  ramBufferSize = 20 m
  maxBufferedDocs = 500
----


==== Elasticsearch configuration

WARNING: The Elasticsearch support is incomplete. Online reindexing
is not implemented yet.

Open and closed changes are indexed in a single index, separated
into types 'open_changes' and 'closed_changes' respectively.

The following settings are only used when the index type is
`ELASTICSEARCH`.

[[index.protocol]]index.protocol::
+
Elasticsearch server protocol [http|https].
+
Defaults to `http`.

[[index.hostname]]index.hostname::
+
Elasticsearch server hostname.

Defaults to `localhost`.

[[index.port]]index.port::
+
Elasticsearch server port.
+
Defaults to `9200`.

[[index.prefix]]index.prefix::
+
This setting can be used to prefix index names to allow multiple Gerrit
instances in a single Elasticsearch cluster. Prefix 'gerrit1_' would result in a
change index named 'gerrit1_changes_0001'.
+
Not set by default.

[[ldap]]
=== Section ldap

LDAP integration is only enabled if `auth.type` is set to
`HTTP_LDAP`, `LDAP` or `CLIENT_SSL_CERT_LDAP`.  See above for a
detailed description of the `auth.type` settings and their
implications.

An example LDAP configuration follows, and then discussion of
the parameters introduced here.  Suitable defaults for most
parameters are automatically guessed based on the type of server
detected during startup.  The guessed defaults support
link:http://www.ietf.org/rfc/rfc2307.txt[RFC 2307], Active
Directory and link:https://www.freeipa.org[FreeIPA].

----
[ldap]
  server = ldap://ldap.example.com

  accountBase = ou=people,dc=example,dc=com
  accountPattern = (&(objectClass=person)(uid=${username}))
  accountFullName = displayName
  accountEmailAddress = mail

  groupBase = ou=groups,dc=example,dc=com
  groupMemberPattern = (&(objectClass=group)(member=${dn}))
----

[[ldap.server]]ldap.server::
+
URL of the organization's LDAP server to query for user information
and group membership from.  Must be of the form `ldap://host` or
`ldaps://host` to bind with either a plaintext or SSL connection.
+
If `auth.type` is `LDAP` this setting should use `ldaps://` to
ensure the end user's plaintext password is transmitted only over
an encrypted connection.

[[ldap.sslVerify]]ldap.sslVerify::
+
If false and ldap.server is an `ldaps://` style URL, Gerrit
will not verify the server certificate when it connects to
perform a query.
+
By default, true, requiring the certificate to be verified.

[[ldap.groupsVisibleToAll]]ldap.groupsVisibleToAll::
+
If true, LDAP groups are visible to all registered users.
+
By default, false, LDAP groups are visible only to administrators and
group members.

[[ldap.username]]ldap.username::
+
_(Optional)_ Username to bind to the LDAP server with.  If not set,
an anonymous connection to the LDAP server is attempted.

[[ldap.password]]ldap.password::
+
_(Optional)_ Password for the user identified by `ldap.username`.
If not set, an anonymous (or passwordless) connection to the LDAP
server is attempted.

[[ldap.referral]]ldap.referral::
+
_(Optional)_ How an LDAP referral should be handled if it is
encountered during directory traversal.  Set to `follow` to
automatically follow any referrals, or `ignore` to ignore the
referrals.
+
By default, `ignore`.

[[ldap.readTimeout]]ldap.readTimeout::
+
_(Optional)_ The read timeout for an LDAP operation. The value is
in the usual time-unit format like "1 s", "100 ms", etc...
A timeout can be used to avoid blocking all of the SSH command start
threads in case the LDAP server becomes slow.
+
By default there is no timeout and Gerrit will wait for the LDAP
server to respond until the TCP connection times out.

[[ldap.accountBase]]ldap.accountBase::
+
Root of the tree containing all user accounts.  This is typically
of the form `ou=people,dc=example,dc=com`.
+
This setting may be added multiple times to specify more than
one root.

[[ldap.accountScope]]ldap.accountScope::
+
Scope of the search performed for accounts.  Must be one of:
+
* `one`: Search only one level below accountBase, but not recursive
* `sub` or `subtree`: Search recursively below accountBase
* `base` or `object`: Search exactly accountBase; probably not desired

+
Default is `subtree` as many directories have several levels.

[[ldap.accountPattern]]ldap.accountPattern::
+
Query pattern to use when searching for a user account.  This may be
any valid LDAP query expression, including the standard `(&...)` and
`(|...)` operators.  If `auth.type` is `HTTP_LDAP` then the variable
`${username}` is replaced with a parameter set to the username
that was supplied by the HTTP server.  If `auth.type` is `LDAP` then
the variable `${username}` is replaced by the string entered by
the end user.
+
This pattern is used to search the objects contained directly under
the `ldap.accountBase` tree.  A typical setting for this parameter
is `(uid=${username})` or `(cn=${username})`, but the proper
setting depends on the LDAP schema used by the directory server.
+
Default is `(uid=${username})` for FreeIPA and RFC 2307 servers,
and `(&(objectClass=user)(sAMAccountName=${username}))`
for Active Directory.

[[ldap.accountFullName]]ldap.accountFullName::
+
_(Optional)_ Name of an attribute on the user account object which
contains the initial value for the user's full name field in Gerrit.
Typically this is the `displayName` property in LDAP, but could
also be `legalName` or `cn`.
+
Attribute values may be concatenated with literal strings.  For
example to join given name and surname together, use the pattern
`${givenName} ${SN}`.
+
If set, users will be unable to modify their full name field, as
Gerrit will populate it only from the LDAP data.
+
Default is `displayName` for FreeIPA and RFC 2307 servers,
and `${givenName} ${sn}` for Active Directory.

[[ldap.accountEmailAddress]]ldap.accountEmailAddress::
+
_(Optional)_ Name of an attribute on the user account object which
contains the user's Internet email address, as defined by this
LDAP server.
+
Attribute values may be concatenated with literal strings,
for example to set the email address to the lowercase form
of sAMAccountName followed by a constant domain name, use
`${sAMAccountName.toLowerCase}@example.com`.
+
If set, the preferred email address will be prefilled from LDAP,
but users may still be able to register additional email addresses,
and select a different preferred email address.
+
Default is `mail`.

[[ldap.accountSshUserName]]ldap.accountSshUserName::
+
_(Optional)_ Name of an attribute on the user account object which
contains the initial value for the user's SSH username field in
Gerrit.  Typically this is the `uid` property in LDAP, but could
also be `cn`.  Administrators should prefer to match the attribute
corresponding to the user's workstation username, as this is what
SSH clients will default to.
+
Attribute values may also be forced to lowercase, or to uppercase in
an expression.  For example, `${sAMAccountName.toLowerCase}` will
force the value of sAMAccountName, if defined, to be all lowercase.
The suffix `.toUpperCase` can be used for the other direction.
The suffix `.localPart` can be used to split attribute values of
the form 'user@example.com' and return only the left hand side, for
example `${userPrincipalName.localPart}` would provide only 'user'.
+
If set, users will be unable to modify their SSH username field, as
Gerrit will populate it only from the LDAP data. Note that once the
username has been set it cannot be changed, therefore it is
recommended not to make changes to this setting that would cause the
value to differ, as this will prevent users from logging in.
+
Default is `uid` for FreeIPA and RFC 2307 servers,
and `${sAMAccountName.toLowerCase}` for Active Directory.

[[ldap.accountMemberField]]ldap.accountMemberField::
+
_(Optional)_ Name of an attribute on the user account object which
contains the groups the user is part of. Typically used for Active
Directory and FreeIPA servers.
+
Default is unset for RFC 2307 servers (disabled)
and `memberOf` for Active Directory and FreeIPA.

[[ldap.accountMemberExpandGroups]]ldap.accountMemberExpandGroups::
+
_(Optional)_ Whether to expand nested groups recursively. This
setting is used only if `ldap.accountMemberField` is set.
+
Default is unset for FreeIPA and `true` for RFC 2307 servers
and Active Directory.

[[ldap.fetchMemberOfEagerly]]ldap.fetchMemberOfEagerly::
+
_(Optional)_ Whether to fetch the `memberOf` account attribute on
login. Setups which use LDAP for user authentication but don't make
use of the LDAP groups may benefit from setting this option to `false`
as this will result in a much faster LDAP login.
+
Default is unset for RFC 2307 servers (disabled) and `true` for
Active Directory and FreeIPA.

[[ldap.groupBase]]ldap.groupBase::
+
Root of the tree containing all group objects.  This is typically
of the form `ou=groups,dc=example,dc=com`.
+
This setting may be added multiple times to specify more than
one root.

[[ldap.groupScope]]ldap.groupScope::
+
Scope of the search performed for group objects.  Must be one of:
+
* `one`: Search only one level below groupBase, but not recursive
* `sub` or `subtree`: Search recursively below groupBase
* `base` or `object`: Search exactly groupBase; probably not desired

+
Default is `subtree` as many directories have several levels.

[[ldap.groupPattern]]ldap.groupPattern::
+
Query pattern used when searching for an LDAP group to connect
to a Gerrit group.  This may be any valid LDAP query expression,
including the standard `(&...)` and `(|...)` operators.  The variable
`${groupname}` is replaced with the search term supplied by the
group owner.
+
Default is `(cn=${groupname})` for FreeIPA and RFC 2307 servers,
and `(&(objectClass=group)(cn=${groupname}))` for Active Directory.

[[ldap.groupMemberPattern]]ldap.groupMemberPattern::
+
Query pattern to use when searching for the groups that a user
account is currently a member of.  This may be any valid LDAP query
expression, including the standard `(&...)` and `(|...)` operators.
+
If `auth.type` is `HTTP_LDAP` then the variable `${username}` is
replaced with a parameter set to the username that was supplied
by the HTTP server.  Other variables appearing in the pattern,
such as `${fooBarAttribute}`, are replaced with the value of the
corresponding attribute (in this case, `fooBarAttribute`) as read
from the user's account object matched under `ldap.accountBase`.
Attributes such as `${dn}` or `${uidNumber}` may be useful.
+
Default is `(|(memberUid=${username})(gidNumber=${gidNumber}))` for
RFC 2307, and unset (disabled) for Active Directory and FreeIPA.

[[ldap.groupName]]ldap.groupName::
+
_(Optional)_ Name of the attribute on the group object which contains
the value to use as the group name in Gerrit.
+
Typically the attribute name is `cn` for RFC 2307 and Active Directory
servers.  For other servers the attribute name may differ, for example
`apple-group-realname` on Apple MacOS X Server.
+
It is also possible to specify a literal string containing a pattern of
attribute values.  For example to create a Gerrit group name consisting of
LDAP group name and group ID, use the pattern `${cn} (${gidNumber})`.
+
Default is `cn`.

[[ldap.mandatoryGroup]]ldap.mandatoryGroup::
+
All users must be a member of this group to allow account creation or
authentication.
+
Setting mandatoryGroup implies enabling of `ldap.fetchMemberOfEagerly`
+
By default, unset.

[[ldap.localUsernameToLowerCase]]ldap.localUsernameToLowerCase::
+
Converts the local username, that is used to login into the Gerrit
Web UI, to lower case before doing the LDAP authentication. By setting
this parameter to true, a case insensitive login to the Gerrit Web UI
can be achieved.
+
If set, it must be ensured that the local usernames for all existing
accounts are converted to lower case, otherwise a user that has a
local username that contains upper case characters will not be able to login
anymore. The local usernames for the existing accounts can be
converted to lower case by running the server program
link:pgm-LocalUsernamesToLowerCase.html[LocalUsernamesToLowerCase].
Please be aware that the conversion of the local usernames to lower
case can't be undone. For newly created accounts the local username
will be directly stored in lower case.
+
By default, unset/false.

[[ldap.authentication]]ldap.authentication::
+
Defines how Gerrit authenticates with the server. When set to `GSSAPI`
Gerrit will use Kerberos. To use kerberos the
`java.security.auth.login.config` system property must point to a
login to a JAAS configuration file and, if Java 6 is used, the system
property `java.security.krb5.conf` must point to the appropriate
krb5.ini file with references to the KDC.

Typical jaas.conf.

----
KerberosLogin {
    com.sun.security.auth.module.Krb5LoginModule
            required
            useTicketCache=true
            doNotPrompt=true
            renewTGT=true;
};
----

See Java documentation on how to create the krb5.ini file.

Note the `renewTGT` property to make sure the TGT does not expire,
and `useTicketCache` to use the TGT supplied by the operating system. As
the whole point of using GSSAPI is to have passwordless authentication
to the LDAP service, this option does not acquire a new TGT on its own.

On Windows servers the registry key `HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\Kerberos\Parameters`
must have the DWORD value `allowtgtsessionkey` set to 1 and the account must not
have local administrator privileges.

[[ldap.useConnectionPooling]]ldap.useConnectionPooling::
+
_(Optional)_ Enable the LDAP connection pooling or not.
+
If it is true, the LDAP service provider maintains a pool of (possibly)
previously used connections and assigns them to a Context instance as
needed. When a Context instance is done with a connection (closed or
garbage collected), the connection is returned to the pool for future use.
+
For details, see link:http://docs.oracle.com/javase/tutorial/jndi/ldap/pool.html[
LDAP connection management (Pool)] and link:http://docs.oracle.com/javase/tutorial/jndi/ldap/config.html[
LDAP connection management (Configuration)]
+
By default, false.

[[ldap.connectTimeout]]ldap.connectTimeout::
+
_(Optional)_ Timeout period for establishment of an LDAP connection.
+
The value is in the usual time-unit format like "1 s", "100 ms",
etc...
+
By default there is no timeout and Gerrit will wait indefinitely.

[[ldap-connection-pooling]]
==== LDAP Connection Pooling
Once LDAP connection pooling is enabled by setting the link:#ldap.useConnectionPooling[
ldap.useConnectionPooling] configuration property to `true`, the connection pool
can be configured using JVM system properties as explained in the
link:http://docs.oracle.com/javase/7/docs/technotes/guides/jndi/jndi-ldap.html#POOL[
Java SE Documentation].

For standalone Gerrit (running with the embedded Jetty), JVM system properties
are specified in the link:#container[container section]:

----
  javaOptions = -Dcom.sun.jndi.ldap.connect.pool.maxsize=20
  javaOptions = -Dcom.sun.jndi.ldap.connect.pool.prefsize=10
  javaOptions = -Dcom.sun.jndi.ldap.connect.pool.timeout=300000
----

[[lfs]]
=== Section lfs

[[lfs.plugin]]lfs.plugin::
+
The name of a plugin which serves the
link:https://github.com/github/git-lfs/blob/master/docs/api/v1/http-v1-batch.md[
LFS protocol] on the `<project-name>/info/lfs/objects/batch` endpoint. When
not configured Gerrit will respond with `501 Not Implemented` on LFS protocol
requests.
+
By default unset.

[[log]]
=== Section log

[[log.jsonLogging]]log.jsonLogging::
+
If set to true, enables error logging in JSON format (file name: "logs/error_log.json").
+
Defaults to false.

[[log.textLogging]]log.textLogging::
+
If set to true, enables error logging in regular plain text format. Can only be disabled
if `jsonLogging` is enabled.
+
Defaults to true.

[[mimetype]]
=== Section mimetype

[[mimetype.name.safe]]mimetype.<name>.safe::
+
If set to true, files with the MIME type `<name>` will be sent as
direct downloads to the user's browser, rather than being wrapped up
inside of zipped archives.  The type name may be a complete type
name, e.g. `image/gif`, a generic media type, e.g. `+image/*+`,
or the wildcard `+*/*+` to match all types.
+
By default, false for all MIME types.

Common examples:
----
[mimetype "image/*"]
  safe = true

[mimetype "application/pdf"]
  safe = true

[mimetype "application/msword"]
  safe = true

[mimetype "application/vnd.ms-excel"]
  safe = true
----

[[oauth]]
=== Section oauth

OAuth integration is only enabled if `auth.type` is set to `OAUTH`. See
link:#auth.type[above] for a detailed description of the `auth.type` settings
and their implications.

By default, contact information, like the full name and email address,
is retrieved from the selected OAuth provider when a user account is created,
or when a user requests to reload that information in the settings UI. If
that is not supported by the OAuth provider, users can be allowed to edit
their contact information manually.

[[oauth.allowEditFullName]]oauth.allowEditFullName::
+
If true, the full name can be edited in the contact information.
+
Default is false.

[[oauth.allowRegisterNewEmail]]oauth.allowRegisterNewEmail::
+
If true, additional email addresses can be registered in the contact
information.
+
Default is false.

[[pack]]
=== Section pack

Global settings controlling how Gerrit Code Review creates pack
streams for Git clients running clone, fetch, or pull.  Most of these
variables are per-client request, and thus should be carefully set
given the expected concurrent request load and available CPU and
memory resources.

[[pack.deltacompression]]pack.deltacompression::
+
If true, delta compression between objects is enabled.  This may
result in a smaller overall transfer for the client, but requires
more server memory and CPU time.
+
False (off) by default, matching Gerrit Code Review 2.1.4.

[[pack.threads]]pack.threads::
+
Maximum number of threads to use for delta compression (if enabled).
This is per-client request.  If set to 0 then the number of CPUs is
auto-detected and one thread per CPU is used, per client request.
+
By default, 1.


[[plugins]]
=== Section plugins

[[plugins.checkFrequency]]plugins.checkFrequency::
+
How often plugins should be examined for new plugins to load, removed
plugins to be unloaded, or updated plugins to be reloaded.  Values can
be specified using standard time unit abbreviations ('ms', 'sec',
'min', etc.).
+
If set to 0, automatic plugin reloading is disabled.  Administrators
may force reloading with link:cmd-plugin-reload.html[gerrit plugin reload].
+
Default is 1 minute.

[[plugins.allowRemoteAdmin]]plugins.allowRemoteAdmin::
+
Enable remote installation, enable and disable of plugins over HTTP
and SSH.  If set to true Administrators can install new plugins
remotely, or disable existing plugins.  Defaults to false.

[[plugins.jsLoadTimeout]]plugins.jsLoadTimeout::
+
Set the timeout value for loading JavaScript plugins in Gerrit UI.
Values can be specified using standard time unit abbreviations ('ms',
'sec', 'min', etc.).
+
Default is 5 seconds. Negative values will be converted to 0.

[[receive]]
=== Section receive

This section is used to configure behavior of the 'receive-pack'
handler, which responds to 'git push' requests.

[[receive.allowGroup]]receive.allowGroup::
+
Name of the groups of users that are allowed to execute
'receive-pack' on the server. One or more groups can be set.
+
If no groups are added, any user will be allowed to execute
'receive-pack' on the server.

[[receive.certNonceSeed]]receive.certNonceSeed::
+
If set to a non-empty value and server-side signed push validation is
link:#receive.enableSignedPush[enabled], use this value as the seed to
the HMAC SHA-1 nonce generator. If unset, a 64-byte random seed will be
generated at server startup.
+
As this is used as the seed of a cryptographic algorithm, it is
recommended to be placed in link:#secure-config[`secure.config`].
+
Defaults to unset.

[[receive.certNonceSlop]]receive.certNonceSlop::
+
When validating the nonce passed as part of the signed push protocol,
accept valid nonces up to this many seconds old. This allows
certificate verification to work over HTTP where there is a lag between
the HTTP response providing the nonce to sign and the next request
containing the signed nonce. This can be significant on large
repositories, since the lag also includes the time to count objects on
the client.
+
Default is 5 minutes.

[[receive.changeUpdateThreads]]receive.changeUpdateThreads::
+
Number of threads to perform change creation or patch set updates
concurrently. Each thread uses its own database connection from
the database connection pool, and if all threads are busy then
main receive thread will also perform a change creation or patch
set update.
+
Defaults to 1, using only the main receive thread. This feature is for
databases with very high latency that can benefit from concurrent
operations when multiple changes are impacted at once.

[[receive.checkMagicRefs]]receive.checkMagicRefs::
+
If true, Gerrit will verify the destination repository has
no references under the magic 'refs/drafts', 'refs/for', or
'refs/publish' branch namespaces. Names under these locations
confuse clients when trying to upload code reviews so Gerrit
requires them to be empty.
+
If false Gerrit skips the sanity check and assumes administrators
have ensured the repository does not contain any magic references.
Setting to false to skip the check can decrease latency during push.
+
Default is true.

[[receive.checkReferencedObjectsAreReachable]]receive.checkReferencedObjectsAreReachable::
+
If set to true, Gerrit will validate that all referenced objects that
are not included in the received pack are reachable by the user.
+
Carrying out this check on gits with many refs and commits can be a
very CPU-heavy operation. For non public Gerrit-servers this check may
be overkill.
+
Only disable this check if you trust the clients not to forge SHA1
references to access commits intended to be hidden from the user.
+
Default is true.

[[receive.enableSignedPush]]receive.enableSignedPush::
+
If true, server-side signed push validation is enabled.
+
When a client pushes with `git push --signed`, this ensures that the
push certificate is valid and signed with a valid public key stored in
the `refs/meta/gpg-keys` branch of `All-Users`.
+
Defaults to false.

[[receive.maxBatchChanges]]receive.maxBatchChanges::
+
The maximum number of changes that Gerrit allows to be pushed
in a batch for review. When this number is exceeded Gerrit rejects
the push with an error message.
+
May be overridden for certain groups by specifying a limit in the
link:access-control.html#capability_batchChangesLimit['Batch Changes Limit']
global capability.
+
This setting can be used to prevent users from uploading large
number of changes for review by mistake.
+
Default is zero, no limit.

[[receive.maxObjectSizeLimit]]receive.maxObjectSizeLimit::
+
Maximum allowed Git object size that 'receive-pack' will accept.
If an object is larger than the given size the pack-parsing will abort
and the push operation will fail. If set to zero then there is no
limit.
+
Gerrit administrators can use this setting to prevent developers
from pushing objects which are too large to Gerrit.
+
This setting can also be set in the `project.config`
link:config-project-config.html[receive.maxObjectSizeLimit] in order
to further reduce the global setting. The project specific setting is
only honored when it further reduces the global limit.
+
Default is zero.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.

[[receive.maxTrustDepth]]receive.maxTrustDepth::
+
If signed push validation is link:#receive.enableSignedPush[enabled],
set to the maximum depth to search when checking if a key is
link:#receive.trustedKey[trusted].
+
Default is 0, meaning only explicitly trusted keys are allowed.

[[receive.threadPoolSize]]receive.threadPoolSize::
+
Maximum size of the thread pool in which the change data in received packs is
processed.
+
Defaults to the number of available CPUs according to the Java runtime.

[[receive.timeout]]receive.timeout::
+
Overall timeout on the time taken to process the change data in
received packs. Only includes the time processing Gerrit changes
and updating references, not the time to index the pack. Values can
be specified using standard time unit abbreviations ('ms', 'sec',
'min', etc.).
+
Default is 4 minutes. If no unit is specified, milliseconds
is assumed.

[[receive.trustedKey]]receive.trustedKey::
+
List of GPG key fingerprints that should be considered trust roots by
the server when signed push validation is
link:#receive.enableSignedPush[enabled]. A key is trusted by the server
if it is either in this list, or a path of trust signatures leads from
the key to a configured trust root. The maximum length of the path is
determined by link:#receive.maxTrustDepth[`receive.maxTrustDepth`].
+
Key fingerprints can be displayed with `gpg --list-keys
--with-fingerprint`.
+
Trust signatures can be added to a key using the `tsign` command to
link:https://www.gnupg.org/documentation/manuals/gnupg/OpenPGP-Key-Management.html[
`gpg --edit-key`], after which the signed key should be re-uploaded.
+
If no keys are specified, web-of-trust checks are disabled. This is the
default behavior.


[[repository]]
=== Section repository

Repositories in this sense are the same as projects.

In the following example configuration `Registered Users` is set
to be the default owner of new projects.

----
[repository "*"]
  ownerGroup = Registered Users
----

The only matching patterns supported are exact match or wildcard matching which
can be specified by ending the name with a `*`. If a project matches more than one
repository configuration, then the configuration from the more precise match
will be used. In the following example, the default submit type for a project
named `project/plugins/a` would be `CHERRY_PICK`.

----
[repository "project/*"]
  defaultSubmitType = MERGE_IF_NECESSARY
[repository "project/plugins/*"]
  defaultSubmitType = CHERRY_PICK
----

[NOTE]
All properties are used from the matching repository configuration. In
the previous example, all properties will be used from `project/plugins/\*`
section and no properties will be inherited nor overridden from `project/*`.

[[repository.name.basePath]]repository.<name>.basePath::
+
Alternate to <<gerrit.basePath,gerrit.basePath>>. The repository will be created
and used from this location instead: ${alternateBasePath}/${projectName}.git.
+
If configuring the basePath for an existing project in gerrit, make sure to stop
gerrit, move the repository in the alternate basePath, configure basePath for
this repository and then start Gerrit.
+
Path must be absolute.

[[repository.name.defaultSubmitType]]repository.<name>.defaultSubmitType::
+
The default submit type for newly created projects. Supported values
are `MERGE_IF_NECESSARY`, `FAST_FORWARD_ONLY`, `REBASE_IF_NECESSARY`,
`MERGE_ALWAYS` and `CHERRY_PICK`.
+
By default, `MERGE_IF_NECESSARY`.

[[repository.name.ownerGroup]]repository.<name>.ownerGroup::
+
A name of a group which exists in the database. Zero, one or many
groups are allowed.  Each on its own line.  Groups which don't exist
in the database are ignored.

[[rules]]
=== Section rules

[[rules.enable]]rules.enable::
+
If true, Gerrit will load and execute 'rules.pl' files in each
project's refs/meta/config branch, if present. When set to false,
only the default internal rules will be used.
+
Default is true, to execute project specific rules.

[[rules.reductionLimit]]rules.reductionLimit::
+
Maximum number of Prolog reductions that can be performed when
evaluating rules for a single change. Each function call made
in user rule code, internal Gerrit Prolog code, or the Prolog
interpreter counts against this limit.
+
Sites using very complex rules that need many reductions should
compile Prolog to Java bytecode with link:pgm-rulec.html[rulec].
This eliminates the dynamic Prolog interpreter from charging its
own reductions against the limit, enabling more logic to execute
within the same bounds.
+
A reductionLimit of 0 is nearly infinite, implemented by setting
the internal limit to 2^31-1.
+
Default is 100,000 reductions (about 14 ms on Intel Core i7 CPU).

[[rules.compileReductionLimit]]rules.compileReductionLimit::
+
Maximum number of Prolog reductions that can be performed when
compiling source code to internal Prolog machine code.
+
Default is 10x reductionLimit (1,000,000).

[[rules.maxSourceBytes]]rules.maxSourceBytes::
+
Maximum input size (in bytes) of a Prolog rules.pl file.  Larger
source files may need a larger rules.compileReductionLimit.  Consider
using link:pgm-rulec.html[rulec] to precompile larger rule files.
+
A size of 0 bytes disables rules, same as rules.enable = false.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
+
Default is 128 KiB.

[[rules.maxPrologDatabaseSize]]rules.maxPrologDatabaseSize::
+
Number of predicate clauses allowed to be defined in the Prolog
database by project rules.  Very complex rules may need more than the
default 256 limit, but cost more memory and may need more time to
evaluate.  Consider using link:pgm-rulec.html[rulec] to precompile
larger rule files.
+
Default is 256.

[[execution]]
=== Section execution

[[execution.defaultThreadPoolSize]]execution.defaultThreadPoolSize::
+
The default size of the background execution thread pool in
which miscellaneous tasks are handled.
+
Default is 1.

[[receiveemail]]
=== Section receiveemail

[[receiveemail.protocol]]receiveemail.protocol::
+
Specifies the protocol used for receiving emails. Valid options are
'POP3', 'IMAP' and 'NONE'. Note that Gerrit will automatically switch between
POP3 and POP3s as well as IMAP and IMAPS depending on the specified
link:#receiveemail.encryption[encryption].
+
Defaults to 'NONE' which means that receiving emails is disabled.

[[receiveemail.host]]receiveemail.host::
+
The hostname of the mailserver. Example: 'imap.gmail.com'.
+
Defaults to an empty string which means that receiving emails is disabled.

[[receiveemail.port]]receiveemail.port::
+
The port the email server exposes for receiving emails.
+
Defaults to the industry standard for a given protocol and encryption:
POP3: 110; POP3S: 995; IMAP: 143; IMAPS: 995.

[[receiveemail.username]]receiveemail.username::
+
Username used for authenticating with the email server.
+
Defaults to an empty string.

[[receiveemail.password]]receiveemail.password::
+
Password used for authenticating with the email server.
+
Defaults to an empty string.

[[receiveemail.encryption]]receiveemail.encryption::
+
Encryption standard used for transport layer security between Gerrit and the
email server. Possible values include 'NONE', 'SSL' and 'TLS'.
+
Defaults to 'NONE'.

[[receiveemail.fetchInterval]]receiveemail.fetchInterval::
+
Time between two consecutive fetches from the email server. Communication with
the email server is not kept alive. Examples: 60s, 10m, 1h.
+
Defaults to 60 seconds.

[[receiveemail.enableImapIdle]]receiveemail.enableImapIdle::
+
If the IMAP protocol is used for retrieving emails, IMAPv4 IDLE can be used to
keep the connection with the email server alive and receive a push when a new
email is delivered to the inbox. In this case, Gerrit will process the email
immediately and will not have a fetch delay.
+
Defaults to false.

[[receiveemail.filter.mode]]receiveemail.filter.mode::
+
A black- and whitelist filter to filter incoming emails.
+
If `OFF`, emails are not filtered by the list filter.
+
If `WHITELIST`, only emails where a pattern from
<<receiveemail.filter.patterns,receiveemail.filter.patterns>>
matches 'From' will be processed.
+
If `BLACKLIST`, only emails where no pattern from
<<receiveemail.filter.patterns,receiveemail.filter.patterns>>
matches 'From' will be processed.
+
Defaults to `OFF`.

[[receiveemail.filter.patterns]]receiveemail.filter.patterns::
+
A list of regular expressions to match the email sender against. This can also
be a list of addresses when regular expression characters are escaped.

[[sendemail]]
=== Section sendemail

[[sendemail.enable]]sendemail.enable::
+
If false Gerrit will not send email messages, for any reason,
and all other properties of section sendemail are ignored.
+
By default, true, allowing notifications to be sent.

[[sendemail.html]]sendemail.html::
+
If false, Gerrit will only send plain-text emails.
If true, Gerrit will send multi-part emails with an HTML and
plain text part.
+
By default, true, allowing HTML in the emails Gerrit sends.

[[sendemail.connectTimeout]]sendemail.connectTimeout::
+
The connection timeout of opening a socket connected to a
remote SMTP server.
+
Values can be specified using standard time unit abbreviations
('ms', 'sec', 'min', etc.).
If no unit is specified, milliseconds is assumed.
+
Default is 0. A timeout of zero is interpreted as an infinite
timeout. The connection will then block until established or
an error occurs.

[[sendemail.threadPoolSize]]sendemail.threadPoolSize::
+
Maximum size of thread pool in which the review comments
notifications are sent out asynchronously.
+
By default, 1.

[[sendemail.from]]sendemail.from::
+
Designates what name and address Gerrit will place in the From
field of any generated email messages.  The supported values are:
+
* `USER`
+
Gerrit will set the From header to use the current user's
Full Name and Preferred Email.  This may cause messages to be
classified as spam if the user's domain has SPF or DKIM enabled
and <<sendemail.smtpServer,sendemail.smtpServer>> is not a trusted
relay for that domain. You can specify
<<sendemail.allowedDomain,sendemail.allowedDomain>> to instruct Gerrit to only
send as USER if USER is from those domains.
+
* `MIXED`
+
Shorthand for `${user} (Code Review) <review@example.com>` where
`review@example.com` is the same as <<user.email,user.email>>.
See below for a description of how the replacement is handled.
+
* `SERVER`
+
Gerrit will set the From header to the same name and address
it records in any commits Gerrit creates.  This is set by
<<user.name,user.name>> and <<user.email,user.email>>, or guessed
from the local operating system.
+
* `Code Review <review@example.com>`
+
If set to a name and email address in brackets, Gerrit will use
this name and email address for any messages, overriding the name
that may have been selected for commits by user.name and user.email.
Optionally, the name portion may contain the placeholder `${user}`,
which is replaced by the Full Name of the current user.

+
By default, MIXED.

[[sendemail.allowedDomain]]sendemail.allowedDomain::
+
Only used when `sendemail.from` is set to `USER`.
List of allowed domains. If user's email matches one of the domains, emails will
be sent as USER, otherwise as MIXED mode. Wildcards may be specified by
including `*` to match any number of characters, for example `*.example.com`
matches any subdomain of `example.com`.
+
By default, `*`.

[[sendemail.smtpServer]]sendemail.smtpServer::
+
Hostname (or IP address) of a SMTP server that will relay
messages generated by Gerrit to end users.
+
By default, 127.0.0.1 (aka localhost).

[[sendemail.smtpServerPort]]sendemail.smtpServerPort::
+
Port number of the SMTP server in sendemail.smtpserver.
+
By default, 25, or 465 if smtpEncryption is 'ssl'.

[[sendemail.smtpEncryption]]sendemail.smtpEncryption::
+
Specify the encryption to use, either 'ssl' or 'tls'.
+
By default, 'none', indicating no encryption is used.

[[sendemail.sslVerify]]sendemail.sslVerify::
+
If false and sendemail.smtpEncryption is 'ssl' or 'tls', Gerrit
will not verify the server certificate when it connects to send
an email message.
+
By default, true, requiring the certificate to be verified.

[[sendemail.smtpUser]]sendemail.smtpUser::
+
User name to authenticate with, if required for relay.

[[sendemail.smtpPass]]sendemail.smtpPass::
+
Password for the account named by sendemail.smtpUser.

[[sendemail.allowrcpt]]sendemail.allowrcpt::
+
If present, each value adds one entry to the whitelist of email
addresses that Gerrit can send email to.  If set to a complete
email address, that one address is added to the white list.
If set to a domain name, any address at that domain can receive
email from Gerrit.
+
By default, unset, permitting delivery to any email address.

[[sendemail.includeDiff]]sendemail.includeDiff::
+
If true, new change emails and merged change emails from Gerrit
will include the complete unified diff of the change.
Variable maxmimumDiffSize places an upper limit on how large the
email can get when this option is enabled.
+
By default, false.

[[sendemail.maximumDiffSize]]sendemail.maximumDiffSize::
+
Largest size of unified diff output to include in an email. When
the diff exceeds this size the file paths will be listed instead.
Standard byte unit suffixes are supported.
+
By default, 256 KiB.

[[sendemail.importance]]sendemail.importance::
+
If present, emails sent from Gerrit will have the given level
of importance. Valid values include 'high' and 'low', which
email clients will render in different ways.
+
By default, unset, so no Importance header is generated.

[[sendemail.expiryDays]]sendemail.expiryDays::
+
If present, emails sent from Gerrit will expire after the given
number of days. This will add the Expiry-Date header and
email clients may expire or expunge mails whose Expiry-Date
header is in the past. This should be a positive non-zero
number indicating how many days in the future the mails
should expire.
+
By default, unset, so no Expiry-Date header is generated.

[[sendemail.replyToAddress]]sendemail.replyToAddress::
+
A custom Reply-To address should only be provided if Gerrit is set up to
receive emails and the inbound address differs from
<<sendemail.from,sendemail.from>>.
It will be set as Reply-To header on all types of outgoing email where
Gerrit can parse back a user's reply.
+
Defaults to an empty string which adds <<sendemail.from,sendemail.from>> as
Reply-To if inbound email is enabled and the review's author otherwise.

[[site]]
=== Section site

[[site.allowOriginRegex]]site.allowOriginRegex::
+
List of regular expressions matching origins that should be permitted
to use the Gerrit REST API to read content. These should be trusted
applications as the sites may be able to use the user's credentials.
Only applies to GET and HEAD requests.
+
By default, unset, denying all cross-origin requests.

[[site.refreshHeaderFooter]]site.refreshHeaderFooter::
+
If true the server checks the site header, footer and CSS files for
updated versions. If false, a server restart is required to change
any of these resources. Default is true, allowing automatic reloads.

[[ssh-alias]]
=== Section ssh-alias

Variables in section ssh-alias permit the site administrator to alias
another command from Gerrit or a plugin into the `gerrit` command
namespace. To alias `replication start` to `gerrit replicate`:

----
[ssh-alias]
  replicate = replication start
----

[[sshd]]
=== Section sshd

[[sshd.enableCompression]]sshd.enableCompression::
+
In the general case, we want to disable transparent compression, since
the majority of our data transfer is highly compressed Git pack files
and we cannot make them any smaller than they already are.
+
However, if there are CPU in abundance and the server is reachable
through slow networks, gits with huge amount of refs can benefit from
SSH-compression since git does not compress the ref announcement during
handshake.
+
Compression can be especially useful when Gerrit slaves are being used
for the larger clones and fetches and the master server mostly takes
small receive-packs.
+
By default, `false`.

[[sshd.backend]]sshd.backend::
+
Starting from version 0.9.0 Apache SSHD project added support for NIO2
IoSession. To use the new NIO2 session the `backend` option must be set
to `NIO2`. Otherwise, this option must be set to `MINA`.
+
By default, `NIO2`.

[[sshd.listenAddress]]sshd.listenAddress::
+
Specifies the local addresses the internal SSHD should listen
for connections on.  The following forms may be used to specify
an address.  In any form, `:'port'` may be omitted to use the
default of `29418`.
+
* `'hostname':'port'` (for example `review.example.com:29418`)
* `'IPv4':'port'` (for example `10.0.0.1:29418`)
* `['IPv6']:'port'` (for example `[ff02::1]:29418`)
* `+*:'port'+` (for example `+*:29418+`)

+
--
If multiple values are supplied, the daemon will listen on all
of them.

To disable the internal SSHD, set listenAddress to `off`.

By default, `*:29418`.
--

[[sshd.advertisedAddress]]sshd.advertisedAddress::
+
Specifies the addresses clients should be told to connect to.
This may differ from sshd.listenAddress if a firewall based port
redirector is being used, making Gerrit appear to answer on port
22. The following forms may be used to specify an address.  In any
form, `:'port'` may be omitted to use the default SSH port of 22.

* `'hostname':'port'` (for example `review.example.com:22`)
* `'IPv4':'port'` (for example `10.0.0.1:29418`)
* `['IPv6']:'port'` (for example `[ff02::1]:29418`)

+
--
If multiple values are supplied, the daemon will advertise all
of them.

By default uses the value of `sshd.listenAddress`.
--

[[sshd.tcpKeepAlive]]sshd.tcpKeepAlive::
+
If true, enables TCP keepalive messages to the other side, so
the daemon can terminate connections if the peer disappears.
+
Only effective when `sshd.backend` is set to `MINA`.
+
By default, `true`.

[[sshd.threads]]sshd.threads::
+
Number of threads to use when executing SSH command requests.
If additional requests are received while all threads are busy they
are queued and serviced in a first-come-first-served order.
+
By default, 2x the number of CPUs available to the JVM.

[[sshd.batchThreads]]sshd.batchThreads::
+
Number of threads to allocate for SSH command requests from
link:access-control.html#non-interactive_users[non-interactive users].
If equals to 0, then all non-interactive requests are executed in the same
queue as interactive requests.
+
Any other value will remove the number of threads from the queue
allocated to interactive users, and create a separate thread pool
of the requested size, which will be used to run commands from
non-interactive users.
+
If the number of threads requested for non-interactive users is larger
than the total number of threads allocated in sshd.threads, then the
value of sshd.threads is increased to accommodate the requested value.
+
By default is 1 on single core node, 2 otherwise.

[[sshd.streamThreads]]sshd.streamThreads::
+
Number of threads to use when formatting events to asynchronous
streaming clients.  Event formatting is multiplexed onto this thread
pool by a simple FIFO scheduling system.
+
By default, 1 plus the number of CPUs available to the JVM.

[[sshd.commandStartThreads]]sshd.commandStartThreads::
+
Number of threads used to parse a command line submitted by a client
over SSH for execution, create the internal data structures used by
that command, and schedule it for execution on another thread.
+
By default, 2.

[[sshd.maxAuthTries]]sshd.maxAuthTries::
+
Maximum number of authentication attempts before the server
disconnects the client.  Each public key that a client has loaded
into its local agent counts as one auth request.  Users can work
around the server's limit by loading less keys into their agent,
or selecting a specific key in their `~/.ssh/config` file with
the `IdentityFile` option.
+
By default, 6.

[[sshd.loginGraceTime]]sshd.loginGraceTime::
+
Time in seconds that a client has to authenticate before the server
automatically terminates their connection.  Values should use common
unit suffixes to express their setting:
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days

+
By default, 2 minutes.

[[sshd.idleTimeout]]sshd.idleTimeout::
+
Time in seconds after which the server automatically terminates idle
connections (or 0 to disable closing of idle connections).  Values
should use common unit suffixes to express their setting:
+
* s, sec, second, seconds
* m, min, minute, minutes
* h, hr, hour, hours
* d, day, days

+
By default, 0.

[[sshd.maxConnectionsPerUser]]sshd.maxConnectionsPerUser::
+
Maximum number of concurrent SSH sessions that a user account
may open at one time.  This is the number of distinct SSH logins
that each user may have active at one time, and is not related to
the number of commands a user may issue over a single connection.
If set to 0, there is no limit.
+
By default, 64.

[[sshd.cipher]]sshd.cipher::
+
Available ciphers.  To permit multiple ciphers, specify multiple
`sshd.cipher` keys in the configuration file, one cipher name
per key.  Cipher names starting with `+` are enabled in addition
to the default ciphers, cipher names starting with `-` are removed
from the default cipher set.
+
Supported ciphers: `aes128-cbc`, `aes128-cbc`, `aes256-cbc`, `blowfish-cbc`,
`3des-cbc`, `none`.
+
By default, all supported ciphers except `none` are available.

[[sshd.mac]]sshd.mac::
+
Available MAC (message authentication code) algorithms.  To permit
multiple algorithms, specify multiple `sshd.mac` keys in the
configuration file, one MAC per key.  MAC names starting with `+`
are enabled in addition to the default MACs, MAC names starting with
`-` are removed from the default MACs.
+
Supported MACs: `hmac-md5`, `hmac-md5-96`, `hmac-sha1`, `hmac-sha1-96`,
`hmac-sha2-256`, `hmac-sha2-512`.
+
By default, all supported MACs are available.

[[sshd.kex]]sshd.kex::
+
--
Available key exchange algorithms. To permit multiple algorithms,
specify multiple `sshd.kex` keys in the configuration file, one key
exchange algorithm per key.  Key exchange algorithm names starting
with `+` are enabled in addition to the default key exchange
algorithms, key exchange algorithm names starting with `-` are
removed from the default key exchange algorithms.

In the following example configuration, support for the 1024-bit
`diffie-hellman-group1-sha1` key exchange is disabled while leaving
all of the other default algorithms enabled:

----
[sshd]
  kex = -diffie-hellman-group1-sha1
----

Supported key exchange algorithms:

* `ecdh-sha2-nistp521`
* `ecdh-sha2-nistp384`
* `ecdh-sha2-nistp256`
* `diffie-hellman-group-exchange-sha256`
* `diffie-hellman-group-exchange-sha1`
* `diffie-hellman-group14-sha1`
* `diffie-hellman-group1-sha1`

By default, all supported key exchange algorithms are available.
Without Bouncy Castle, `diffie-hellman-group1-sha1` is the only
available algorithm.
--

[[sshd.kerberosKeytab]]sshd.kerberosKeytab::
+
Enable kerberos authentication for SSH connections.  To permit
kerberos authentication, the server must have a host principal
(see `sshd.kerberosPrincipal`) which is acquired from a keytab.
This must be provisioned by the kerberos administrators, and is
typically installed into `/etc/krb5.keytab` on host machines.
+
The keytab must contain at least one `host/` principal, typically
using the host's canonical name. If it does not use the
canonical name, the `sshd.kerberosPrincipal` should be configured
with the correct name.
+
By default, not set and so kerberos authentication is not enabled.

[[sshd.kerberosPrincipal]]sshd.kerberosPrincipal::
+
If kerberos authentication is enabled with `sshd.kerberosKeytab`,
instead use the given principal name instead of the default.
If the principal does not begin with `host/` a warning message is
printed and may prevent successful authentication.
+
This may be useful if the host is behind an IP load balancer or
other SSH forwarding systems, since the principal name is constructed
by the client and must match for kerberos authentication to work.
+
By default, `host/canonical.host.name`

[[sshd.requestLog]]sshd.requestLog::
+
Enable (or disable) the `'$site_path'/logs/sshd_log` request log.
If enabled, a request log file is written out by the SSH daemon.
+
`log4j.appender` with the name `sshd_log` can be configured to overwrite
programmatic configuration.
+
By default, `true`.

[[sshd.rekeyBytesLimit]]sshd.rekeyBytesLimit::
+
The SSH daemon will issue a rekeying after a certain amount of data.
This configuration option allows you to tweak that setting.
+
By default, 1073741824 (bytes, 1GB).
+
The `rekeyBytesLimit` cannot be set to lower than 32.

[[sshd.rekeyTimeLimit]]sshd.rekeyTimeLimit::
+
The SSH daemon will issue a rekeying after a certain amount of time.
This configuration option allows you to tweak that setting.
+
By default, 1h.
+
Set to 0 to disable this check.

[[suggest]]
=== Section suggest

[[suggest.maxSuggestedReviewers]]suggest.maxSuggestedReviewers::
+
The maximum numbers of reviewers suggested.
+
By default 10.

[[suggest.from]]suggest.from::
+
The number of characters that a user must have typed before suggestions
are provided. If set to 0, suggestions are always provided. This is only
used for suggesting accounts when adding members to a group.
+
By default 0.

[[theme]]
=== Section theme

[[theme.backgroundColor]]theme.backgroundColor::
+
Background color for the page, and major data tables like the all
open changes table or the account dashboard. The value must be a
valid HTML hex color code, or standard color name.
+
By default white, `FFFFFF`.

[[theme.topMenuColor]]theme.topMenuColor::
+
This is the color of the main menu bar at the top of the page.
The value must be a valid HTML hex color code, or standard color
name.
+
By default white, `FFFFFF`.

[[theme.textColor]]theme.textColor::
+
Text color for the page, and major data tables like the all
open changes table or the account dashboard. The value must be a
valid HTML hex color code, or standard color name.
+
By default dark grey, `353535`.

[[theme.trimColor]]theme.trimColor::
+
Primary color used as a background color behind text.  This is
the color of the main menu bar at the top, of table headers,
and of major UI areas that we want to offset from other portions
of the page.  The value must be a valid HTML hex color code, or
standard color name.
+
By default a light grey, `EEEEEE`.

[[theme.selectionColor]]theme.selectionColor::
+
Background color used within a trimColor area to denote the currently
selected tab, or the background color used in a table to denote the
currently selected row.  The value must be a valid HTML hex color
code, or standard color name.
+
By default a pale blue, `D8EDF9`.

[[theme.changeTableOutdatedColor]]theme.changeTableOutdatedColor::
+
Background color used for patch outdated messages.  The value must be
a valid HTML hex color code, or standard color name.
+
By default a shade of red, `F08080`.

[[theme.tableOddRowColor]]theme.tableOddRowColor::
+
Background color for tables such as lists of open reviews for odd
rows.  This is so you can have a different color for odd and even
rows of the table.  The value must be a valid HTML hex color code,
or standard color name.
+
By default transparent.

[[theme.tableEvenRowColor]]theme.tableEvenRowColor::
+
Background color for tables such as lists of open reviews for even
rows.  This is so you can have a different color for odd and even
rows of the table.  The value must be a valid HTML hex color code,
or standard color name.
+
By default transparent.

A different theme may be used for signed-in vs. signed-out user status
by using the "signed-in" and "signed-out" theme sections. Variables
not specified in a section are inherited from the default theme.

----
[theme]
  backgroundColor = FFFFFF
[theme "signed-in"]
  backgroundColor = C0C0C0
[theme "signed-out"]
  backgroundColor = 00FFFF
----

As example, here is the theme configuration to have the old green look:

----
[theme]
  backgroundColor = FCFEEF
  textColor = 000000
  trimColor = D4E9A9
  selectionColor = FFFFCC
  topMenuColor = D4E9A9
  changeTableOutdatedColor = F08080
[theme "signed-in"]
  backgroundColor = FFFFFF
----

[[trackingid]]
=== Section trackingid

Tagged footer lines containing references to external
tracking systems, parsed out of the commit message and
saved in Gerrit's secondary index.

After making changes to this section, existing changes
must be reindexed with link:pgm-reindex.html[reindex].

The tracking ids are searchable using tr:<tracking id> or
bug:<tracking id>.

----
[trackingid "jira-bug"]
  footer = Bugfix:
  footer = Bug:
  match = JRA\\d{2,8}
  system = JIRA

[trackingid "jira-feature"]
  footer = Feature
  match = JRA(\\d{2,8})
  system = JIRA
----

[[trackingid.name.footer]]trackingid.<name>.footer::
+
A prefix tag that identifies the footer line to parse for tracking ids.
+
Several trackingid entries can have the same footer tag, and a single trackingid
entry can have multiple footer tags.
+
If multiple footer tags are specified, each tag will be parsed separately and
duplicates will be ignored.
+
The trailing ":" is optional.

[[trackingid.name.match]]trackingid.<name>.match::
+
A link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard
Java regular expression (java.util.regex)] used to match the
external tracking id part of the footer line. The match can
result in several entries in the DB.  If grouping is used in the
regex the first group will be interpreted as the tracking id.
Tracking ids longer than 32 characters will be ignored.
+
The configuration file parser eats one level of backslashes, so the
character class `\s` requires `\\s` in the configuration file.  The
parser also terminates the line at the first `#`, so a match
expression containing # must be wrapped in double quotes.

[[trackingid.name.system]]trackingid.<name>.system::
+
The name of the external tracking system (maximum 10 characters).
It is possible to have several trackingid entries for the same
tracking system.

[[transfer]]
=== Section transfer

[[transfer.timeout]]transfer.timeout::
+
Number of seconds to wait for a single network read or write
to complete before giving up and declaring the remote side is
not responding.  If 0, there is no timeout, and this server will
wait indefinitely for a transfer to finish.
+
A timeout should be large enough to mostly transfer the objects to
the other side.  1 second may be too small for larger projects,
especially over a WAN link, while 10-30 seconds is a much more
reasonable timeout value.
+
Defaults to 0 seconds, wait indefinitely.


[[upload]]
=== Section upload

Sets the group of users allowed to execute 'upload-pack' on the
server, 'upload-pack' is what runs on the server during a user's
fetch, clone or repo sync command.

----
[upload]
  allowGroup = GROUP_ALLOWED_TO_EXECUTE
  allowGroup = YET_ANOTHER_GROUP_ALLOWED_TO_EXECUTE
----

[[upload.allowGroup]]upload.allowGroup::
+
Name of the groups of users that are allowed to execute 'upload-pack'
on the server. One or more groups can be set.
+
If no groups are added, any user will be allowed to execute
'upload-pack' on the server.

[[urlAlias]]
=== Section urlAlias

URL aliases define regular expressions for URL tokens that are mapped
to target URL tokens.

Each URL alias must be specified in its own subsection. The subsection
name should be a descriptive name. It must be unique, but is not
interpreted in any way.

The URL aliases are applied in no particular order. The first matching
URL alias is used and further matches are ignored.

URL aliases can be used to map plugin screens into the Gerrit URL
namespace, or to replace Gerrit screens by plugin screens.

Example:

----
[urlAlias "MyPluginScreen"]
  match = /myscreen/(.*)
  token = /x/myplugin/myscreen/$1
[urlAlias "MyChangeScreen"]
  match = /c/(.*)
  token = /x/myplugin/c/$1
----

[[urlAlias.match]]urlAlias.match::
+
A regular expression for a URL token.
+
The matched URL token is replaced by `urlAlias.token`.

[[urlAlias.token]]urlAlias.token::
+
The target URL token.
+
It can contain placeholders for the groups matched by the
`urlAlias.match` regular expression: `$1` for the first matched group,
`$2` for the second matched group, etc.

[[submodule]]
=== Section submodule

[[submodule.verbosesuperprojectupdate]]submodule.verboseSuperprojectUpdate::
+
When using link:user-submodules.html#automatic_update[automatic superproject updates]
this option will determine how the submodule commit messages are included into
the commit message of the superproject update.
+
If `FALSE`, will not include any commit messages for the gitlink update.
+
If `SUBJECT_ONLY`, will include only the commit subjects.
+
If `TRUE`, will include full commit messages.
+
By default this is `TRUE`.

[[submodule.enableSuperProjectSubscriptions]]submodule.enableSuperProjectSubscriptions::
+
This allows to enable the superproject subscription mechanism.
+
By default this is true.

[[user]]
=== Section user

[[user.name]]user.name::
+
Name that Gerrit calls itself in Git when it creates a new Git
commit, such as a merge during change submission.
+
By default this is "Gerrit Code Review".

[[user.email]]user.email::
+
Email address that Gerrit refers to itself as when it creates a
new Git commit, such as a merge commit during change submission.
+
If not set, Gerrit generates this as "gerrit@`hostname`", where
`hostname` is the hostname of the system Gerrit is running on.
+
By default, not set, generating the value at startup.

[[user.anonymousCoward]]user.anonymousCoward::
+
Username that is displayed in the Gerrit Web UI and in e-mail
notifications if the full name of the user is not set.
+
By default "Anonymous Coward" is used.


== [[secure.config]]File `etc/secure.config`
The optional file `'$site_path'/etc/secure.config` overrides (or
supplements) the settings supplied by `'$site_path'/etc/gerrit.config`.
The file should be readable only by the daemon process and can be
used to contain private configuration entries that wouldn't normally
be exposed to everyone.

Sample `etc/secure.config`:
----
[auth]
  registerEmailPrivateKey = 2zHNrXE2bsoylzUqDxZp0H1cqUmjgWb6

[database]
  username = webuser
  password = s3kr3t

[ldap]
  password = l3tm3srch

[httpd]
  sslKeyPassword = g3rr1t

[sendemail]
  smtpPass = sp@m

[remote "bar"]
  password = s3kr3t
----

== File `etc/peer_keys`

The optional file `'$site_path'/etc/peer_keys` controls who can
login as the 'Gerrit Code Review' user, required for the link:cmd-suexec.html[suexec]
command.

The format is one Base-64 encoded public key per line.


== Database system_config

Several columns in the `system_config` table within the metadata
database may be set to control how Gerrit behaves.

[NOTE]
The contents of the `system_config` table are cached at startup
by Gerrit.  If you modify any columns in this table, Gerrit needs
to be restarted before it will use the new values.

=== Configurable Parameters

site_path::
+
Local filesystem directory holding the site customization assets.
Placing this directory under version control and/or backup is a
good idea.
+
Files in this directory provide additional configuration.
+
Other files support site customization.
+
* link:config-themes.html[Themes]

GERRIT
------
Part of link:index.html[Gerrit Code Review]

SEARCHBOX
---------